to follow, share, and participate in this community.
Hi I have a application which is under control of the cluster and needs to be shutdown and startup manually for maintenance like patching , how can I shutdown the application with... Stop application under cluster for maintenance Back Hi, We have a poor man’s cluster with data redundancy through locally mirrored iSCSI disks. Solaris 11.1 x86 + Solaris Cluster 4.1 Most all of the instructions I found describe mirroring the phy... What logical device for COMSTAR whole disk iSCSI? Back Hi I was just checking the clutser status output and noticed that under--Device Groups Status-- ALL disks are showing Offline === Cluster Device Groups === --- Device Group Status --... Back Hi, I've 2 sun blade T5-1B and I create 4 ldoms on each blade, also I install the Solaris Cluster 3.3u2 and its all done successfully, I did several time resource fail-over with nodes, everything seems working perfec... Solaris Cluster 3.3u2 configuration - Solaris Ldoms Back Hi I have a application running under SUN cluster 3.2 in a zfs pool. I need to increase the disk space in this pool by adding a new LUN. Apart from running the steps of addi... Hello, I installed the SUN Cluster 4.1 under solaris 11.1 on our 2 SUN T3. Then, I installed and configure 2 Guest LDom under this SUN Cluster. Now, When I try to test the Switch Cluster Resource between Node... Guest LDom is not bind on second Node Back Fail to remove did device from diskset Back Hello, I have a GDS resource ending with the following status: Resource Name &nbs... Resource State vs. Status Message Back Modification of ZFS Pool in Oracle Cluster Environment Back Oracle Cluster Manager GUI Back Solaris Cluster 3.3 incarnation number Back Need to integrate Oracle TDE "Transparent Data Encryption" with SUN cluster Back Adding Siebel Gateway Resource is failing on second node Back Cluster in a box with Guest LDOMs : SCSI-3 reservations are not supported Back globaldevices file system Back I have two node x86 Solaris cluster HA,Whats the minimum failover time? Back services are taking 3 minutes to failover from one node to the other node,How can i reduce this time? Back Need help reconfiguring resources to avoid them going offline Back