Forum Stats

  • 3,677,900 Users
  • 2,468 Discussions
  • 2,204 Comments

Discussions

What are the correct DIP switch settings for an Epson tm-t88 printer using IDN printing?

What are the correct DIP switch settings for an Epson tm-t88 printer using IDN printing?

Tagged:

Best Answer

  • Switch 7 is for the diagnostic self-test. This should be off for operations.

    Switches 1 through 4 are as follows, only the switches that must be turned on will be specified. Any switches 1 through 4 that are not specified should be turned off.

    The switches 1 through 4 represent a binary numeral equal to the IDN ID, as indicated in the list below.

    IDN ID 1 - switch 4 on

    IDN ID 2 - switch 3 on

    IDN ID 3 - switch 3 & 4 on

    IDN ID 4 - switch 2 on

    IDN ID 5 - switch 2 & 4 on

    IDN ID 6 - switch 2 & 3 on

    IDN ID 7 - switch 2, 3 & 4 on

    IDN ID 8 - switch 1 on

    IDN ID 9 - switch 1 & 4 on

    IDN ID 10 - switch 1 & 3 on

    IDN ID 11 - switch 1, 3 & 4 on

    IDN ID 12 - switch 1 & 2 on

    IDN ID 13 - switch 1, 2 & 4 on

    IDN ID 14 - switch 1, 2 & 3 on

    IDN ID 15 - switch 1, 2, 3 & 4 on

This discussion has been closed.