Hi. Did we get answer to this? I have the same issue. No disc found when installing OS onto new X6270 M2 Blade. I see the disc however from the LSI Configuration interface. I don't want to create any raid as I'm planning to use software raid (disksuite). Also, what is the difference between SGX-SAS6-R-REM-Z 2 and SGX-SAS6-REM-Z. I have SGX-SAS6-R-REM-Z installed so I have a feeling I'm required to create a raid device otherwise I won't see the individual disc when booting the server. Correct? Thanks in advance.
Hi, Solaris 10 x86 U10 (8/11). But I haven't gotten that far yet with the install. The blade don't see any disk to install to. From the BIOS I don't see the disk either as an option to boot from. I do however see the disk when I get into the LSI configuration menu. Thanks much!
Can you show LSi settings and disk status from LSI RAID menu ?
Thank you so much for the documentations. Let me try to figure out how to give you the info. Right now what I'm seeing from the server is different from what's in the doc you sent. First off there is no CTRL-C when I see the LSI banner. THere is CTRL-H and when I press ctrl-H I see a difference interface which show's me one adapter
bus no. 1
dev no. 1
type LSA MegaRAID SAS 9262-8i
As i understand docs:
You must create raid with card. You can create two volumes: 1 on every Disk as RAID 0.
But this raid must be configured.
Possible, more easy just configure one RAID1.
Thank you, Thank you! this is what I've been looking for. We are trying to avoid creating a HW raid as it is not our standard. We use software raid. This is the first time we have this REM so I guess we have no choice for this one. Thanks again. You rock!