1 Reply Latest reply: Aug 6, 2012 11:19 AM by mgoblue11 RSS

    Guest Domain can't communicate on the network

    mgoblue11
      I setup a guest domain and then jumpstarted a host to it. The network information is configured correctly; however, my guest domain can't ping the router or the primary controller on the network. See the details in the next comment.
        • 1. Re: Guest Domain can't communicate on the network
          mgoblue11
          From the primary controller

          bash-3.2# ifconfig -a
          lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
          inet 127.0.0.1 netmask ff000000
          vsw0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
          inet 172.25.229.16 netmask ffffffe0 broadcast 172.25.229.31
          ether 0:10:e0:c:ad:78
          bash-3.2# netstat -in
          Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
          lo0 8232 127.0.0.0 127.0.0.1 50989 0 50989 0 0 0
          vsw0 1500 172.25.229.0 172.25.229.16 762682 14 113111 0 77 0

          bash-3.2# netstat -rn

          Routing Table: IPv4
          Destination Gateway Flags Ref Use Interface
          -------------------- -------------------- ----- ----- ---------- ---------
          default 172.25.229.30 UG 1 440
          172.25.229.0 172.25.229.16 U 1 175 vsw0
          127.0.0.1 127.0.0.1 UH 3 1008 lo0


          -bash-3.2# ldm -V

          Logical Domains Manager (v 2.2.0.0)
          Hypervisor control protocol v 1.9
          Using Hypervisor MD v 1.4

          System PROM:
          Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
          Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
          OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26

          -----------------------------------------------

          -bash-3.2# ldm list
          NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
          primary active -n-cv- UART 32 16G 0.1% 3d 21h 24m
          ldg-ussgwr11 active -n---- 5000 32 15G 0.0% 2d 19h 56m


          ------------------------------------------------------------

          -bash-3.2# ldm list -l
          NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
          primary active -n-cv- UART 32 16G 0.1% 3d 21h 25m

          SOFTSTATE
          Solaris running

          UUID
          b7d9a09e-e103-4737-c0a8-84d38a58330d

          MAC
          00:10:e0:0c:ad:78

          HOSTID
          0x860cad78

          CONTROL
          failure-policy=ignore
          extended-mapin-space=off
          cpu-arch=native

          DEPENDENCY
          master=

          CORE
          CID CPUSET
          0 (0, 1, 2, 3, 4, 5, 6, 7)
          1 (8, 9, 10, 11, 12, 13, 14, 15)
          2 (16, 17, 18, 19, 20, 21, 22, 23)
          3 (24, 25, 26, 27, 28, 29, 30, 31)

          VCPU
          VID PID CID UTIL STRAND
          0 0 0 0.1% 100%
          1 1 0 0.0% 100%
          2 2 0 0.1% 100%
          3 3 0 0.1% 100%
          4 4 0 0.0% 100%
          5 5 0 0.0% 100%
          6 6 0 0.0% 100%
          7 7 0 0.0% 100%
          8 8 1 0.0% 100%
          9 9 1 0.0% 100%
          10 10 1 0.0% 100%
          11 11 1 0.1% 100%
          12 12 1 0.0% 100%
          13 13 1 0.0% 100%
          14 14 1 0.1% 100%
          15 15 1 0.1% 100%
          16 16 2 0.0% 100%
          17 17 2 0.0% 100%
          18 18 2 0.0% 100%
          19 19 2 0.0% 100%
          20 20 2 0.1% 100%
          21 21 2 0.1% 100%
          22 22 2 0.0% 100%
          23 23 2 0.0% 100%
          24 24 3 0.1% 100%
          25 25 3 0.0% 100%
          26 26 3 0.0% 100%
          27 27 3 0.0% 100%
          28 28 3 0.2% 100%
          29 29 3 0.0% 100%
          30 30 3 0.0% 100%
          31 31 3 0.0% 100%

          MEMORY
          RA PA SIZE
          0x20000000 0x20000000 16G

          CONSTRAINT
          threading=max-throughput

          VARIABLES
          boot-device=/pci@400/pci@2/pci@0/pci@4/scsi@0/disk@w5000cca02596ae15,0:a disk net
          keyboard-layout=US-English

          IO
          DEVICE PSEUDONYM OPTIONS
          pci@400 pci_0
          niu@480 niu_0
          pci@400/pci@1/pci@0/pci@8 /SYS/MB/RISER0/PCIE0
          pci@400/pci@2/pci@0/pci@8 /SYS/MB/RISER1/PCIE1
          pci@400/pci@1/pci@0/pci@6 /SYS/MB/RISER2/PCIE2
          pci@400/pci@2/pci@0/pci@c /SYS/MB/RISER0/PCIE3
          pci@400/pci@1/pci@0/pci@0 /SYS/MB/RISER1/PCIE4
          pci@400/pci@2/pci@0/pci@a /SYS/MB/RISER2/PCIE5
          pci@400/pci@1/pci@0/pci@4 /SYS/MB/SASHBA0
          pci@400/pci@2/pci@0/pci@4 /SYS/MB/SASHBA1
          pci@400/pci@2/pci@0/pci@6 /SYS/MB/NET0
          pci@400/pci@2/pci@0/pci@7 /SYS/MB/NET2

          VCC
          NAME PORT-RANGE
          primary-vcc0 5000-5100

          VSW
          NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
          primary-vsw0_igb0 00:10:e0:0c:ad:78 igb0 0 switch@0 1 1 1500 on
          vsw-jmp 00:14:4f:fb:ab:16 igb3 1 switch@1 1 1 1500 on

          VDS
          NAME VOLUME OPTIONS MPGROUP DEVICE
          primary-vds0 zdisk0 /dev/zvol/dsk/rpool/ldg-ussgwr11

          VCONS
          NAME SERVICE PORT
          UART

          ------------------------------------------------------------------------------
          NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
          ldg-ussgwr11 active -n---- 5000 32 15G 0.0% 2d 19h 57m

          SOFTSTATE
          Solaris running

          UUID
          58087bf4-5aa9-6e67-8e49-f19119e33160

          MAC
          00:14:4f:fa:1a:81

          HOSTID
          0x84fa1a81

          CONTROL
          failure-policy=ignore
          extended-mapin-space=off
          cpu-arch=native

          DEPENDENCY
          master=

          CORE
          CID CPUSET
          4 (32, 33, 34, 35, 36, 37, 38, 39)
          5 (40, 41, 42, 43, 44, 45, 46, 47)
          6 (48, 49, 50, 51, 52, 53, 54, 55)
          7 (56, 57, 58, 59, 60, 61, 62, 63)

          VCPU
          VID PID CID UTIL STRAND
          0 32 4 0.1% 100%
          1 33 4 0.0% 100%
          2 34 4 0.0% 100%
          3 35 4 0.0% 100%
          4 36 4 0.0% 100%
          5 37 4 0.0% 100%
          6 38 4 0.0% 100%
          7 39 4 0.0% 100%
          8 40 5 0.0% 100%
          9 41 5 0.0% 100%
          10 42 5 0.0% 100%
          11 43 5 0.0% 100%
          12 44 5 0.0% 100%
          13 45 5 0.0% 100%
          14 46 5 0.0% 100%
          15 47 5 0.0% 100%
          16 48 6 0.0% 100%
          17 49 6 0.0% 100%
          18 50 6 0.0% 100%
          19 51 6 0.0% 100%
          20 52 6 0.0% 100%
          21 53 6 0.0% 100%
          22 54 6 0.0% 100%
          23 55 6 0.0% 100%
          24 56 7 0.0% 100%
          25 57 7 0.0% 100%
          26 58 7 0.0% 100%
          27 59 7 0.0% 100%
          28 60 7 0.0% 100%
          29 61 7 0.0% 100%
          30 62 7 0.0% 100%
          31 63 7 0.0% 100%

          MEMORY
          RA PA SIZE
          0x20000000 0x420000000 15G

          CONSTRAINT
          threading=max-throughput

          VARIABLES
          auto-boot?=true
          boot-device=disk:a zdisk0
          keyboard-layout=US-English

          NETWORK
          NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
          vnet1 primary-vsw0_igb0@primary 0 network@0 00:14:4f:fa:49:33 1 1500
          vnet2 vsw-jmp@primary 1 network@1 00:14:4f:f9:b6:47 1 1500

          DISK
          NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
          zdisk0 zdisk0@primary-vds0 0 disk@0 primary

          VCONS
          NAME SERVICE PORT
          ldg-ussgwr11 primary-vcc0@primary 5000

          ---------------------------------

          -bash-3.2# ldm list-services
          VCC
          NAME LDOM PORT-RANGE
          primary-vcc0 primary 5000-5100

          VSW
          NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
          primary-vsw0_igb0 primary 00:10:e0:0c:ad:78 igb0 0 switch@0 1 1 1500 on
          vsw-jmp primary 00:14:4f:fb:ab:16 igb3 1 switch@1 1 1 1500 on

          VDS
          NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
          primary-vds0 primary zdisk0 /dev/zvol/dsk/rpool/ldg-ussgwr11


          ----------------------------------

          -bash-3.2# dladm show-dev
          vsw0 link: up speed: 100 Mbps duplex: half
          vsw1 link: up speed: 100 Mbps duplex: half
          igb0 link: up speed: 100 Mbps duplex: half
          igb1 link: unknown speed: 0 Mbps duplex: half
          igb2 link: unknown speed: 0 Mbps duplex: half
          igb3 link: up speed: 100 Mbps duplex: half
          usbecm0 link: down speed: 10 Mbps duplex: full

          ------------------------------

          -bash-3.2# dladm show-link
          vsw0 type: non-vlan mtu: 1500 device: vsw0
          vsw1 type: non-vlan mtu: 1500 device: vsw1
          igb0 type: non-vlan mtu: 1500 device: igb0
          igb1 type: non-vlan mtu: 1500 device: igb1
          igb2 type: non-vlan mtu: 1500 device: igb2
          igb3 type: non-vlan mtu: 1500 device: igb3
          usbecm0 type: non-vlan mtu: 1500 device: usbecm0


          -------------------------------------------------------------------------------------------------


          From the guest host:


          bash-3.2# netstat -r

          Routing Table: IPv4
          Destination Gateway Flags Ref Use Interface
          -------------------- -------------------- ----- ----- ---------- ---------
          default 172.25.229.30 UG 1 23870
          172.25.229.0 ussgwr11 U 1 23776 vnet1
          224.0.0.0 ussgwr11 U 1 0 vnet1
          localhost localhost UH 1 0 lo0


          ash-3.2# netstat -in
          Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
          lo0 8232 127.0.0.0 127.0.0.1 0 0 0 0 0 0
          vnet1 1500 172.25.229.0 172.25.229.17 3597 0 67538 0 0 0

          bash-3.2# ifconfig -a
          lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
          inet 127.0.0.1 netmask ff000000
          vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
          inet 172.25.229.17 netmask ffffffe0 broadcast 172.25.229.31
          ether 0:14:4f:f9:b6:47


          bash-3.2# dladm show-dev
          vnet0 link: down speed: 0 Mbps duplex: unknown
          vnet1 link: up speed: 0 Mbps duplex: unknown


          bash-3.2# dladm show-linkprop vnet1
          LINK PROPERTY VALUE DEFAULT POSSIBLE
          vnet1 zone -- -- --
          vnet1 tagmode vlanonly vlanonly vlanonly,normal