This discussion is archived
1 Reply Latest reply: Sep 11, 2012 12:18 PM by rdoogan RSS

Error: unable to open qlm connection - multiple configured device attachmen

941982 Newbie
Currently Being Moderated
Ran this command "lsvol --drive raid_0n" one day.
Worked.


Following day output was.
Error: unable to open qlm connection - multiple configured device attachments exist

The following is listing od devices.
Any ideas?
lsdev -l
raid_0n_2:
Device type: tape
Model: Ultrium 5-SCSI
Serial number: HU1130HJ12
In service: no
Automount: yes
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
UUID: e2714954-be61-102f-a081-9b963650cb32
Attachment 1:
Host: raid
Raw device: /dev/rmt/0o
raid_c4t500143801604051Cd0:
Device type: library
Model: MSL
Serial number: 1135BRZ048
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: 948d7ec8-bd04-102f-a12a-e47c91d2ca8e
Attachment 1:
Host: raid
Raw device: /dev/scsi/changer/c4t500143801604051Cd0
raid_0n:
Device type: tape
Model: Ultrium
Serial number: HU1130HJ12
In service: yes
Library: raid_c4t500143801604051Cd0
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: 38 minutes, 2 seconds
Cleaning required: no
UUID: 948e249a-bd04-102f-a12a-e47c91d2ca8e
Attachment 1:
Host: raid
Raw device: /dev/rmt/0n
raid_c4t500143801604051Cd0_2:
Device type: library
Model: MSL G3 Series
Serial number: 1135BRZ048
In service: no
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Ejection type: ??
Min writable volumes: 0
UUID: e2710c82-be61-102f-a081-9b963650cb32
Attachment 1:
Host: raid
Raw device: /dev/scsi/changer/c4t500143801604051Cd0
sasl48-lib:
Device type: library
Model: [none]
Serial number: 1135BRZ048
In service: no
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: ea045e60-bcd4-102f-a12a-e47c91d2ca8e
Attachment 1:
Host: denver
Raw device: /dev/obl0
ST lun: 1
sasl48-tape:
Device type: tape
Model: [none]
Serial number: HU1130HJ12
In service: no
Library: sasl48-lib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: 30 seconds
Cleaning required: no
UUID: 9dbdc2de-bcd5-102f-a12a-e47c91d2ca8e
Attachment 1:
Host: denver
Raw device: /dev/obt0
ST lun: 0
ob>

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points