1 2 Previous Next 22 Replies Latest reply: Sep 25, 2012 3:12 AM by Nicolas.Gasparotto Go to original post RSS
      • 15. Re: Peoplesoft Application Server Administration Booting Error Occurs
        961245
        Here's the psappsrv.cfg,

        [Startup]
        ;=========================================================================
        ; Database Signon settings
        ;=========================================================================
        DBName=ORCL
        DBType=ORACLE
        UserId=PS
        UserPswd=PS
        ConnectId=people
        ConnectPswd=peop1e
        ServerName=
        StandbyDBName=
        StandbyDBType=
        StandbyUserId=
        StandbyUserPswd=

        [Database Options]
        ;=========================================================================
        ; Database-specific configuration options
        ;=========================================================================
        SybasePacketSize=
        UseLocalOracleDB=0
        ;ORACLE_SID=
        EnableDBMonitoring=1
        PSDB Maximum Cursors=

        [Security]
        ;=========================================================================
        ; Security settings
        ;=========================================================================
        Validate Signon with Database=0
        DomainConnectionPwd=PS

        [Workstation Listener]
        ;=========================================================================
        ; Settings for Workstation Listener
        ;=========================================================================
        Address=%PS_MACH%
        Port=7000
        WSL Encryption=0
        Min Handlers=1
        Max Handlers=3
        Max Clients per Handler=40
        Client Cleanup Timeout=60
        Init Timeout=5
        Tuxedo Compression Threshold=5000

        [JOLT Listener]
        ;=========================================================================
        ; Settings for JOLT Listener
        ;=========================================================================
        Address=%PS_MACH%
        Port=9000
        JSL Encryption=0
        Min Handlers=5
        Max Handlers=7
        Max Clients per Handler=40
        Client Cleanup Timeout=10
        Init Timeout=5
        Client Connection Mode=ANY
        Jolt Compression Threshold=1000000

        [JOLT Relay Adapter]
        ;=========================================================================
        ; Settings for JOLT Relay Adapter (JRAD)
        ;=========================================================================
        Listener Address=%PS_MACH%
        Listener Port=9100

        [Domain Settings]
        ;=========================================================================
        ; General settings for this Application Server.
        ;=========================================================================

        ;-------------------------------------------------------------------------
        Domain ID=ORCL

        ;-------------------------------------------------------------------------
        Add to PATH=C:\app\L31004\product\11.2.0\home2\BIN

        ;-------------------------------------------------------------------------
        Spawn Threshold=1,600:1,1

        ;-------------------------------------------------------------------------
        Restartable=Y

        ;-------------------------------------------------------------------------
        ; Log Directory defaults to the LOGS directory within %PS_SERVDIR%
        ;Log Directory=

        ;-------------------------------------------------------------------------
        ; This allows for dynamic changes to certain setting without having to reboot
        ; the domain. The settings that can be dynamically changed are: Recycle Count,
        ; Consecutive Service failures, Trace SQL, Trace Mask SQL, TracePC, TracePCMask,
        ; TracePpr, TracePprMask, TracePIA, TracePIAMask, Log Fence, Enable DB Monitoring,
        ; Enable Debugging, LogErrorReport, MailErrorReport, DumpMemoryImageAtCrash
        ; These settings are further identified by the "Dynamic change allowed for .."
        ; comment.
        Allow Dynamic Changes=N

        ;-------------------------------------------------------------------------
        ; Logging detail level
        ;
        ; Level Type of information
        ; ----- -------------------
        ; -100 - Suppress logging
        ; -1 - Protocol, memory errors
        ; 0 - Status information
        ; 1 - General errors
        ; 2 - Warnings
        ; 3 - Tracing Level 1 (default)
        ; 4 - Tracing Level 2
        ; 5 - Tracing Level 3
        ; Dynamic change allowed for LogFence
        LogFence=3

        ;-------------------------------------------------------------------------
        ; Trace-Log File Character Set: Character set used for log and trace files
        ;
        Trace-Log File Character Set=ANSI

        [PeopleCode Debugger]
        ;=========================================================================
        ; PeopleCode Debug Server settings
        ;=========================================================================

        ;-------------------------------------------------------------------------
        PSDBGSRV Listener Port=9500

        ;-------------------------------------------------------------------------
        ; PeopleCode Debugger Trace Settings
        ;
        ; Level Type of tracing
        ; ----- ---------------
        ; 0 Off (default)
        ; 1 Level 1 - log connection activity
        ; 2 Level 2 - log debug broker transactions (getsession, register/unregister, acquire/unacquire)
        ; 3 Level 3 - log primary debuggee/debugger transactions (register, modechange, seteventflag, break)
        ; 4 Level 4 - log debuggee/debugger variables transactions
        ; 5 Level 5 - log debuggee/debugger command responses and gotbreaks
        ; Warning: Levels 3 thru 5 result in lots of transaction data being logger and require plenty of disk space.
        DebuggerMsgLogEnable=0

        [Trace]
        ;=========================================================================
        ; Server Trace settings
        ;=========================================================================

        ;-------------------------------------------------------------------------
        ; SQL Tracing Bitfield
        ;
        ; Bit Type of tracing
        ; --- ---------------
        ; 1 - SQL statements
        ; 2 - SQL statement variables
        ; 4 - SQL connect, disconnect, commit and rollback
        ; 8 - Row Fetch (indicates that it occurred, not data)
        ; 16 - All other API calls except ssb
        ; 32 - Set Select Buffers (identifies the attributes of columns
        ; to be selected).
        ; 64 - Database API specific calls
        ; 128 - COBOL statement timings
        ; 256 - Sybase Bind information
        ; 512 - Sybase Fetch information
        ; 1024 - SQL Informational Trace
        ; 4096 - Manager information
        ; 8192 - Mapcore information
        ; Dynamic change allowed for TraceSql and TraceSqlMask
        TraceSql=0
        TraceSqlMask=12319

        ;-------------------------------------------------------------------------
        ; PeopleCode Tracing Bitfield
        ;
        ; Bit Type of tracing
        ; --- ---------------
        ; 1 - Trace Evaluator instructions (not recommended)
        ; 2 - List Evaluator program (not recommended)
        ; 4 - Show assignments to variables
        ; 8 - Show fetched values
        ; 16 - Show stack
        ; 64 - Trace start of programs
        ; 128 - Trace external function calls
        ; 256 - Trace internal function calls
        ; 512 - Show parameter values
        ; 1024 - Show function return value
        ; 2048 - Trace each statement in program (recommended)
        ; Dynamic change allowed for TracePC and TracePCMask
        TracePC=0
        TracePCMask=4095

        ;-------------------------------------------------------------------------
        ; Panel Processor Tracing Bitfield
        ;
        ; Bit Type of tracing
        ; --- ---------------
        ; 1 - Log extra debug messages
        ; 2 - Dump panel after build
        ; 4 - Dump buffers after PPRInit
        ; 8 - Dump buffers before/after service
        ; 16 - Dump buffers after scrollselect
        ; 32 - Dump buffers after modal panel
        ; 64 - Dump buffers before save
        ; 128 - Dump buffers after insertrow
        ; 256 - Trace default processing
        ; 512 - Dump PRM data
        ; 1024 - Show function return value
        ; 2048 - dump memory statistics
        ; 4096 - Trace related display processing
        ; 8192 - Trace keylist generation
        ; 16384 - Trace work record settings
        ; Dynamic change allowed for TracePPR and TracePPRMask
        TracePPR=0
        TracePPRMask=32767

        ;-------------------------------------------------------------------------
        ; PIA Page Generation Tracing Bitfield
        ;
        ; Bit Type of tracing
        ; --- ---------------
        ; 1 - Log page generation errors
        ; 2 - Show table layout via cell borders in generated page
        ; 4 - Annotate field overlap in HTML source
        ; 8 - Detailed trace of table generation algorithm
        ; 16 - Inline stylesheet in generated pages
        ; 32 - Inline javascript in generated pages
        ; 64 - QATesting - annotation and extra tags needed by Robot
        ; 128 - Format source. Make HTML more readable
        ; 256 - Save File. Save each generated page in log directory
        ; 512 - Debug JavaScript. Include debug functions in page
        ; 1024 - Log form data. Log all request parameters on each service
        ; 2048 - Log key errors. Write log message for unrecognized query parameters.
        ; Dynamic change allowed for TracePIA and TracePIAMask
        ;
        TracePIA=0
        TracePIAMask=32767

        ;-------------------------------------------------------------------------
        ; AE Tracing Bitfield
        ;
        ; Bit Type of tracing
        ; --- ---------------
        ; 1 - Trace STEP execution sequence to AET file
        ; 2 - Trace Application SQL statements to AET file
        ; 4 - Trace Dedicated Temp Table Allocation to AET file
        ; 8 - not yet allocated
        ; 16 - not yet allocated
        ; 32 - not yet allocated
        ; 64 - not yet allocated
        ; 128 - Timings Report to AET file
        ; 256 - Method/BuiltIn detail instead of summary in AET Timings Report
        ; 512 - not yet allocated
        ; 1024 - Timings Report to tables, ignored if Process Instance is 0
        ; 2048 - DB optimizer trace to file
        ; 4096 - DB optimizer trace to tables
        ; 8192 - Transform trace
        TraceAE=0

        ;------------------------------------------------------------------------
        ; Analytic Server Tracing Bitfield
        ;
        ; MostSignificantBit -> LeastSignificantBit
        ; QAS |ACE MODEL | ACE CALC | ACE API| Plugin | DCache | Utils | Analytic Server |
        ; 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
        ;
        ; Bit Type of tracing 3 bits per component (octal word)
        ; --- --------------- ---------------------------------
        ; 1 - Analytic Server LSB
        ; 2 - Analytic Server MSB LSB LogFence
        ; 4 - Analytic Server MSB --- --- --------------------
        ; 8 - Utilities LSB 0 0 0 0 (Severity_Status)
        ; 16 - Utilities 0 0 1 1 (Severity_Error)
        ; 32 - Utilities MSB 0 1 0 2 (Severity_Warn)
        ; 64 - DataCache LSB 0 1 1 3 (Severity_Info)
        ; 128 - DataCache 1 0 0 4 (Severity_Trace1)
        ; 256 - DataCache MSB 1 0 1 5 (Severity_Trace2)
        ; 512 - Plug-in LSB 1 1 0 6 (not used)
        ; 1024 - Plug-in 1 1 1 7 (not used)
        ; 2048 - Plug-in MSB
        ; 4096 - ACE API LSB
        ; 8192 - ACE API
        ; 16384 - ACE API MSB
        ; 32768 - ACE CALC LSB
        ; 65536 - ACE CALC
        ; 131072 - ACE CALC MSB
        ; 262144 - ACE MODEL LSB
        ; 524288 - ACE MODEL
        ; 1048576 - ACE MODEL MSB
        ; 2097152 - QAS LSB
        ; 4194304 - QAS
        ; 8388608 - QAS MSB
        ;
        ; The bits enable logging for OptEngine components beyond the standard
        ; LogFence setting. E.g., TraceAnalytic=14380470 sets full trace on all components.
        ; Using 110 (1 greater than Severity_Trace2) for each component:
        ; OptEng: 4 + 2
        ; Utils : 32 + 16
        ; DC : 256 + 128
        ; Plugin: 2048 + 1024
        ; ACE API: 16384 + 8192
        ; ACE CALC: 131072 + 65536
        ; ACE MODEL: 1048576 + 524288
        ; QAS : 8388608 + 4194304
        ; Total : 14380470
        TraceAnalytic=9586980
        TraceAnalyticMask=16777215
        ;------------------------------------------------------------------------
        ; Performance Monitor Tracing Bitfield
        ;
        ; Bit Type of tracing
        ; --- ---------------
        ; 1 - Trace All performance monitor agent activity
        TracePPM=0

        ;-------------------------------------------------------------------------
        ; Create a memory image of the failing process during a crash
        ;
        ; Setting Meaning
        ; ------- ---------------
        ; NONE no memory image
        ; MINI mini memory image
        ; FULL full memory image
        ;
        ; If set to MINI or FULL, when a crash occurs, a memory.dmp file is
        ; generated under <log directory>/<server name>.<process id>.
        ; Dynamic change allowed.
        DumpMemoryImageAtCrash=NONE

        ;-------------------------------------------------------------------------
        ;If set to Y, when a crash occurs, the application server process will write
        ;additional information to help in debugging the crash that occurred.
        ;This consists of the customized object definitions for reproducing
        ;the request on another database.
        DumpManagerObjectsAtCrash=Y

        ;-------------------------------------------------------------------------
        ; If set to Y, when a runtime error is detected, the message and a dump of
        ; the application state will be written to the current log file.
        ; Dynamic change allowed.
        LogErrorReport=N

        ;-------------------------------------------------------------------------
        ; When set to an email address, an email will be sent when an error report
        ; or a crash dump is written to the log.
        ; Dynamic change allowed.
        MailErrorReport=

        [Cache Settings]
        ;==============================================================================================
        ; Settings for managed object caching;
        ; Default EnableServerCaching=2, ServerCacheMode=0
        ; Default CacheBaseDir=%PS_SERVDIR% if defined else %PS_CFG_HOME/<domain name>/cache
        ; You can change these values by uncommenting and setting to the desired value
        ;==============================================================================================
        ;-----------------------------------------------------------------------
        ; EnableServerCaching -
        ; 0 Server file caching disabled
        ; 1 Server file caching limited to most used classes
        ; 2 Server file caching for all types
        ;EnableServerCaching=2
        ;-----------------------------------------------------------------------
        ; CacheBaseDir = the base file cache directory
        ;CacheBaseDir=%PS_SERVDIR%
        ;-----------------------------------------------------------------------
        ; ServerCacheMode
        ; 0 One file cache directory per app server process
        ; 1 One file cache directory per domain (shared file cache, needs to be preloaded)
        ;ServerCacheMode=0
        ;-----------------------------------------------------------------------
        ; Deprecated cache settings : MaxInMemoryObjects
        ;-----------------------------------------------------------------------
        ;-----------------------------------------------------------------------
        ; MaxCacheMemory - controls cache memory pruning
        ; 0 cache memory pruning disabled
        ; >0 max size of memory cache in MBytes
        MaxCacheMemory=0

        ;-----------------------------------------------------------------------
        ; EnableDBCache - When set to Y, Cache is accessed from DB, rather than File-System.
        ; When this setting is enabled, the settings EnableServerCaching, ServerCacheMode and CacheBaseDir are ignored.
        ; Y DB-Cache is enabled
        ; N DB-Cache is disabled
        ;EnableDBCache=

        ;-----------------------------------------------------------------------
        ; PreloadCache - Preload Cache project for File/DB and in-memory Cache
        ; PreloadFileCache setting is deprecated but is still supported for backward compatibility
        ;PreloadCache=
        ;PreloadMemoryCache=

        [RemoteCall]
        ;=========================================================================
        ; Settings for RemoteCall
        ;=========================================================================

        ;-------------------------------------------------------------------------
        ; RemoteCall child process output redirection
        ;
        ; If this parameter is non-zero, the child process output is saved to
        ; <Domain Settings\Log Directory>\<program>_<oprid>.out, and any error
        ; output is saved to <program>_<oprid>.err.
        ; By default, the output is not saved
        ;
        RCCBL Redirect=0

        ;-------------------------------------------------------------------------
        ; Location of COBOL programs
        ; NT/Windows 2000: By default, RemoteCall looks for the COBOL programs in
        ; the directories mentioned below. PS_COBOLTYPE is automatically set when
        ; the application server is started. The value depends upon the database.
        ; Possible values:
        ; PS_COBOLTYPE = A (non-Unicode)
        ; PS_COBOLTYPE = E (EBCDIC)
        ; PS_COBOLTYPE = U (Unicode)
        ;
        ; UNIX: By default, RemoteCall looks for the COBOL programs in
        ; the directories mentioned below.
        ;
        ; You can override the default setting by changing the appropriate
        ; line and modifying the setting to fit your requirements.
        ; NT/Windows 2000:
        ;RCCBL PRDBIN=%PS_APP_HOME%\cblbin%PS_COBOLTYPE%;%PS_HOME%\cblbin%PS_COBOLTYPE%
        ; UNIX:
        ;RCCBL PRDBIN=%PS_APP_HOME%/cblbin:%PS_HOME%/cblbin

        [PSAPPSRV]
        ;=========================================================================
        ; Settings for PSAPPSRV
        ;=========================================================================

        ;-------------------------------------------------------------------------
        ; UBBGEN settings
        Min Instances=2
        Max Instances=2
        Service Timeout=300

        ;-------------------------------------------------------------------------
        ; Number of services after which PSAPPSRV will automatically restart.
        ; If the recycle count is set to zero, PSAPPSRV will never be recycled.
        ; The default value is 10000.
        ; Dynamic change allowed for Recycle Count
        Recycle Count=10000

        ;-------------------------------------------------------------------------
        ; Percentage of Memory Growth after which PSAPPSRV will automatically restart.
        ; Default is 20, meaning additional 20% of memory growth after the process has
        ; built up its memory cache.
        ; Uncomment the setting to use memory growth instead of Recycle Count at
        ; determining the restart point.
        ; Percentage of Memory Growth=20

        ;-------------------------------------------------------------------------
        ; Number of consecutive service failures after which PSAPPSRV will
        ; automatically restart.
        ; If this is set to zero, PSAPPSRV will never be recycled.
        ; The default value is zero.
        ; Dynamic change allowed for Allowed Consec Service Failures
        Allowed Consec Service Failures=2

        ; Max Fetch Size -- max result set size in KB for a SELECT query
        ; Default is 5000KB. Use 0 for no limit.
        Max Fetch Size=5000
        ; Automatically select prompt, 1 = yes, 0 = no
        Auto Select Prompts=1

        ;-------------------------------------------------------------------------
        ; This parameter is used for Tuxedo Queue Threshold Determination (used for Pub/Sub ; processing only). This parameter is the actual Tuxedo message queue size.
        ; This is a kernel parameter in Unix. For Windows, look in BEA Tuxedo, IPC Resources. The default size is 65535.
        Tuxedo Queue Size=65535

        [PSANALYTICSRV]
        ;=========================================================================
        ; Settings for PSANALYTICSRV
        ;=========================================================================

        ;-------------------------------------------------------------------------
        ; UBBGEN settings
        Min Instances=3
        Max Instances=3

        ;-------------------------------------------------------------------------
        ; Number of Analytic Instances an Analytic Server instance will load and
        ; unload before recycling. If the recycle count is set to zero, the
        ; Analytic Server will never be recycled.
        ; The default value is 1.
        ; Dynamic changes to this setting are allowed. A dynamic change will
        ; affect running Analytic Servers.
        ;Recycle Count=1

        ;-------------------------------------------------------------------------
        ; Number of minutes an analytic instance will remain loaded without being
        ; accessed when it is auto-loaded by the analytic grid or when a
        ; PeopleCode program loads the instance with a timeout value of -1.
        ; The default value is 30
        ; Setting this to zero will disable timeouts for auto-loaded instances.
        ; Dynamic changes to this setting are allowed.
        ;Analytic Instance Idle Timeout=30

        ;-------------------------------------------------------------------------
        ; Setting this to 1 will cause each analytic server to log to it's own
        ; file rather than the common PSANALYTICSRV_<Month|Day>.LOG file. The
        ; individual log files will include the Tuxedo server ID.
        ; Dynamic changes to this setting are allowed. Changes will only come
        ; into affect for running analytic servers when they are recycled.
        ; The default value is 0
        ;Analytic Per Server Log=1

        ;-------------------------------------------------------------------------
        ; This setting determines what is the threshold to enable file swaping
        ; in ACE. Each data block is of 6K. Each data cube is divided into multiple
        ; data blocks. In batch environment this could be configured to a higher value.
        ; The default value is 1024 blocks. If set to zero, the disk swaping is disabled.
        ;ACE Max Memory Data Blocks=1024

        ;-------------------------------------------------------------------------
        ; Queue size for data loading in batches. If set to zero, batch loading is disabled.
        ;ACE Load Queue Size=100000

        [PSSAMSRV]
        ;=========================================================================
        ; Settings for PSSAMSRV
        ;=========================================================================

        ;-------------------------------------------------------------------------
        ; UBBGEN settings
        ; PSSAMSRV never spawns, so we set Instances instead of setting a Min and
        ; Max value for Instances.
        Min Instances=1
        Max Instances=1
        Service Timeout=300

        ;-------------------------------------------------------------------------
        ; Number of services after which PSSAMSRV will automatically restart.
        ; If the recycle count is set to zero, PSSAMSRV will never be recycled.
        ; The default value is zero.
        Recycle Count=100000

        ;-------------------------------------------------------------------------
        ; Number of consecutive service failures after which PSSAMSRV will
        ; automatically restart.
        ; If this is set to zero, PSSAMSRV will never be recycled.
        ; The default value is zero.
        Allowed Consec Service Failures=2

        ; Max Fetch Size -- max result set size in KB for a SELECT query
        ; Max Fetch Size=n indicates n * 1024 bytes
        ; Default is 32KB. Use 0 for no limit
        Max Fetch Size=32
        • 16. Re: Peoplesoft Application Server Administration Booting Error Occurs
          961245
          [PSQCKSRV]
          ;=========================================================================
          ; Settings for PSQCKSRV
          ;=========================================================================

          ;-------------------------------------------------------------------------
          ; UBBGEN settings
          Min Instances=1
          Max Instances=1
          Service Timeout=300

          ;-------------------------------------------------------------------------
          ; Number of services after which PSQCKSRV will automatically restart.
          ; If the recycle count is set to zero, PSQCKSRV will never be recycled.
          ; The default value is zero.
          Recycle Count=100000

          ;-------------------------------------------------------------------------
          ; Number of consecutive service failures after which PSQCKSRV will
          ; automatically restart.
          ; If this is set to zero, PSQCKSRV will never be recycled.
          ; The default value is zero.
          Allowed Consec Service Failures=2

          ; Max Fetch Size -- max result set size in KB for a SELECT query
          ; Default is 5000KB. Use 0 for no limit.
          Max Fetch Size=5000

          [PSQRYSRV]
          ;=========================================================================
          ; Settings for PSQRYSRV
          ;=========================================================================

          ;-------------------------------------------------------------------------
          ; UBBGEN settings
          Min Instances=1
          Max Instances=1
          Service Timeout=1200

          ;-------------------------------------------------------------------------
          ; Number of services after which PSQRYSRV will automatically restart.
          ; If the recycle count is set to zero, PSQRYSRV will never be recycled.
          ; The default value is zero.
          Recycle Count=100000

          ;-------------------------------------------------------------------------
          ; Number of consecutive service failures after which PSQRYSRV will
          ; automatically restart.
          ; If this is set to zero, PSQRYSRV will never be recycled.
          ; The default value is zero.
          Allowed Consec Service Failures=2

          ; Max Fetch Size -- max result set size in KB for a SELECT query
          ; Default is 10000KB. Use 0 for no limit.
          Max Fetch Size=10000

          ; Use dirty-read(uncommitted read) for PSQRYSRV only on DB2/OS390 or SQL Server
          Use dirty-read=0

          [Publish&Subscribe]
          ;=========================================================================
          ; Settings for PUB/SUB servers
          ;=========================================================================

          ;-------------------------------------------------------------------------
          ; Option to disable Persistent cursors option for DB2/OS390 on PUB/SUB servers only.
          ; If this option is set to zero, persistent cursors will not be enabled. Therefore,
          ; all sql satements will be compiled each time the statement is envoked.
          ; A setting of 1 will enable persistent cursors for PUB/SUB.
          Persistent Cursors on DB2/OS390=0

          ;-------------------------------------------------------------------------
          ; Option to initially configure the PUB/SUB servers in this Domain in SLAVE mode.
          ; A setting of 1 will initialize the PUB/SUB servers in Slave Mode. A Setting of
          ; 0 will initialize the PUB/SUB servers in normal (Master) mode
          Domain Slave Mode=0

          ;-------------------------------------------------------------------------
          ; This value is used to determine how many In-Memory Message Segments are allowed
          ; before reading/ writing message segments to database directly is automatically
          ; enabled. Moreover this value is used to chunk (ordered) segmented messages being
          ; sent to IB gateway.
          Message Segment From DB=10

          ;-------------------------------------------------------------------------
          ; This value is to determine the time interval between load balance processing when
          ; the dispatcher is processing requests. This processing consists of attempting to perform
          ; the equivalent of an On Idle ping on all down nodes (without the ping interval delay)
          ; for the default publication contract dispatcher (_dflt). Moreover, for all dispatchers (not
          ; configured as Slaves) when this interval is reached the equivalent of on idle processing will be performed. This
          ; means that if other queues can be processed they will be for that current dispatch cycle.
          ;
          ; The value used will be the number of minutes between load balance processing. When
          ; true on-idle processing is performed the load balance interval time will be reset.
          ; A setting of 0 will disable this feature.
          ;
          Load Balance Interval=0

          ;-------------------------------------------------------------------------
          ; This value will perform a serial recycle of Handler processes in the same process group.
          ; This prevents all Handlers within the same group from recycling at the same time (providing
          ; the server does recycle properly within the allocated recycle time of 60 seconds).
          ; The default setting enables this functionality. A value of N will disable this feature.
          ; Serial recycle time must be 60 seconds or greater.
          Serial Recycle=Y
          ;Serial Recycle Time=60

          ;-------------------------------------------------------------------------
          ; Percentage of Memory Growth after which a Handler Process will automatically restart.
          ; Default is 20, meaning additional 20% of memory growth after the process has
          ; built up its memory cache. Uncomment the setting to use memory growth and Interval
          ; instead of Recycle Count for Handlers at determining the restart point. The Memory Growth
          ; Interval parameter determines how many requests to process between checks. The default is 100.
          ;Percentage of Memory Growth=20
          ;Memory Growth Interval=100

          [PSBRKDSP_dflt]
          ;=========================================================================
          ; Settings for Publication Broker dispatcher
          ;=========================================================================
          Recycle Count=0
          Allowed Consec Service Failures=0

          ;The Dispatch List is determined by the number of associated handlers multiplied
          ;by this value.
          Dispatch List Multiplier=10

          ;-------------------------------------------------------------------------
          ; After this many seconds of inactivity, the server will scan the
          ; database queues and restart any stalled/crashed items
          Scan Interval=15

          ;-------------------------------------------------------------------------
          ; This determines the Maximum number of items per queue that the Dispatcher
          ; will keep in memory
          Dispatcher Queue Max Queue Size=1000

          ;-------------------------------------------------------------------------
          ; After this many attempted dispatches the in-memory queue for that queue
          ; will be refreshed.
          ; A setting of 0 will disable the memory queue refresh.
          ; A setting of 1 will disable in-memory caching.
          Memory Queue Refresh rate=1000

          ;-------------------------------------------------------------------------
          ; Items which have been 'started' for more than this number of seconds
          ; will be restarted.
          Restart Period=120

          [PSBRKHND_dflt]
          ;=========================================================================
          ; Settings for Publication Broker handler
          ;=========================================================================
          Min Instances=1
          Max Instances=1
          Service Timeout=1200
          Recycle Count=20000
          Allowed Consec Service Failures=0

          ;-------------------------------------------------------------------------
          ; After an item has been dispatched this many times, it will be marked
          ; 'error'.
          Max Retries=5


          [PSSUBDSP_dflt]
          ;=========================================================================
          ; Settings for subscription contract dispatcher
          ;=========================================================================
          Recycle Count=0
          Allowed Consec Service Failures=0

          ;-------------------------------------------------------------------------
          ;The Dispatch List is determined by the number of associated handlers multiplied
          ;by this value.
          Dispatch List Multiplier=10

          ;-------------------------------------------------------------------------
          ; After this many seconds of inactivity, the server will scan the
          ; database queues and restart any stalled/crashed items
          Scan Interval=15

          ;-------------------------------------------------------------------------
          ; This determines the Maximum number of items per queue that the Dispatcher
          ; will keep in memory
          Dispatcher Queue Max Queue Size=1000

          ;-------------------------------------------------------------------------
          ; After this many attempted dispatches the in-memory queue for that queue
          ; will be refreshed.
          ; A setting of 0 will disable the memory queue refresh.
          ; A setting of 1 will disable in-memory caching.
          Memory Queue Refresh rate=1000

          ;-------------------------------------------------------------------------
          ; Items which have been 'started' for more than this number of seconds
          ; will be restarted.
          Restart Period=120

          [PSSUBHND_dflt]
          ;=========================================================================
          ; Settings for subscription contract handler
          ;=========================================================================
          Min Instances=1
          Max Instances=1
          Service Timeout=1200
          Recycle Count=20000
          Allowed Consec Service Failures=0

          ;-------------------------------------------------------------------------
          ; After an item has been dispatched this many times, it will be marked 'error'
          Max Retries=5

          [PSPUBDSP_dflt]
          ;=========================================================================
          ; Settings for publication contract dispatcher
          ;=========================================================================
          Recycle Count=0
          Allowed Consec Service Failures=0

          ;-------------------------------------------------------------------------
          ;The Dispatch List is determined by the number of associated handlers multiplied
          ;by this value.
          Dispatch List Multiplier=10

          ;-------------------------------------------------------------------------
          ; After this many seconds of inactivity, the server will scan the
          ; database queues and restart any stalled/crashed items. The scan rate and Ping
          ; rate (as percentage) will determine the actual interval for pinging
          ; any unavailable remote nodes (algorithm used: Attempts * Ping Rate * Scan Interval).
          ; The maximum Ping Interval (in Hours) is the maximum interval between
          ; subsequent attempted pings of any unavailable remote nodes.
          Scan Interval=15
          Ping Rate=150
          Maximum Ping Interval=1

          ;-------------------------------------------------------------------------
          ; This determines the Maximum number of items per queue that the Dispatcher
          ; will keep in memory
          Dispatcher Queue Max Queue Size=1000

          ;-------------------------------------------------------------------------
          ; After this many attempted dispatches the in-memory queue for that queue
          ; will be refreshed.
          ; A setting of 0 will disable the memory queue refresh.
          ; A setting of 1 will disable in-memory caching.
          Memory Queue Refresh rate=1000

          ;-------------------------------------------------------------------------
          ; Items which have been 'started' for more than this number of seconds
          ; will be restarted.
          Restart Period=120

          [PSPUBHND_dflt]
          ;=========================================================================
          ; Settings for publication contract handler
          ;=========================================================================
          Min Instances=1
          Max Instances=1
          Service Timeout=1200
          Recycle Count=20000
          Allowed Consec Service Failures=0
          ; Thread Pool Size. The Minumum value is 1 and maximum allowable is 20.
          Thread Pool Size=1

          ;-------------------------------------------------------------------------
          ; After an item has been dispatched this many times, it will be marked 'error'.
          Max Retries=5


          ;_@_APSRV WARNING: DO NOT ALTER THIS LINE -- Marker for append point used by PSADMIN

          [SMTP Settings]
          ;=========================================================================
          ; Settings for SMTP mail
          ; Allow Dynamic Changes under [Domain Settings] has no effect on these controls
          ;=========================================================================

          ; Dynamic change allowed for SMTPServer
          SMTPServer=

          ; Dynamic change allowed for SMTPPort
          SMTPPort=25

          ; Dynamic change allowed for SMTPServer1
          SMTPServer1=

          ; Dynamic change allowed for SMTPPort1
          SMTPPort1=0

          ; Dynamic change allowed for SMTPSender
          SMTPSender=PeopleSoft@peoplesoft.com

          ; Dynamic change allowed for SMTPBlackberryReplyTo
          SMTPBlackberryReplyTo=

          ; Dynamic change allowed for SMTPSourceMachine
          SMTPSourceMachine=

          ; Dynamic change allowed for SMTPCharacterSet
          SMTPCharacterSet=UTF-8

          ; Dynamic change allowed for SMTPEncodingDLL
          SMTPEncodingDLL=
          SMTPGuaranteed=0
          SMTPTrace=0
          SMTPSendTime=0

          SMTPUseSSL=N
          SMTPSSLPort=465
          SMTPClientCertAlias=

          SMTPUseSSL1=N
          SMTPSSLPort1=465
          SMTPClientCertAlias1=

          [Interface Driver]
          ;=========================================================================
          ; General settings for Business Interlink Interface Drivers
          ;=========================================================================
          ;This defines the "RPS_LOCALE" string which is sent to the SCP (Supply Chain
          ;Planning) server.
          SCP_LOCALE="LOCALE=EN_US","CHARSET=US-ASCII"

          [PSTOOLS]
          ;=========================================================================
          ; General settings for PSTOOLS
          ;=========================================================================
          ; This will suppress SQL error dialogs. This option helps prevent
          ; SQL injection attacks by only writing SQL errors to the log files
          ; (and not displaying them to a user.)
          Suppress SQL Error=1

          ;Uncomment this to specify an alternate directory to search for Interface Drivers.
          ;Business Interlink Driver Directory=

          ;Set the value to 1 to Enable PPM Agents,0 to disable PPM Agents
          EnablePPM Agent=0

          ;To add directories or jar files to CLASSPATH for the jvm loaded via JNI, uncomment Add to CLASSPATH=
          ;and set it equal to the list of elements you would like to use.
          ;The classpath elements need to be seperated using the path seperator specific to the platform.
          ;For Example: Add to CLASSPATH=/usr/class:/home/user/class
          ;Add to CLASSPATH=

          ;To pass java options to the jvm loaded via JNI, uncomment JavaVM Options=
          ;and set it equal to the list of parameters you would like to use.
          ;The options need to be a blank space separated list of valid java options.
          ;Consult your JRE vendor for valid java options.
          ;For example: JavaVM Options=-Xmx256m -Xms128m
          JavaVM Options=-Dxdo.ConfigFile=%PS_HOME%/appserv/xdo.cfg

          ;If the application server is behind a proxy server,
          ;set "Proxy Host=" to the domain name of the proxy server (proxy.peoplesoft.com)
          ;set "Proxy Port=" to the port number of the proxy server (80)
          Proxy Host=

          Proxy Port=

          ;set "Non Proxy Hosts=" to a list of hosts that should be connected to directly
          ;and not through proxy server. The value can be a list of hosts, each
          ;seperated by a |, and in addition a wildcard character (*) can be used for
          ;matching. For example: Non Proxy Hosts=*.foo.com|localhost. The maximum
          ;length of this string cannot exceed 1024 characters.
          Non Proxy Hosts=

          ;To set the DISPLAY environment variable on headless UNIX boxes running applications
          ;with chart graphics. Xvfb must also be started and configured to use this value.
          ;For example, Display=localhost:10.0
          ;Display=

          ; Usage Monitoring domain settings
          ; 0 No user can enable monitoring. This is the default and the only option for clients
          ; 1 All users are monitored, no one can disable monitoring, users are anonymous unless testing
          ; 2 All users are monitored, no one can disable monitoring, no users are anonymous
          Usage Monitoring State=0

          ;-------------------------------------------------------------------------
          ; IMPORTANT NOTE: THIS SETTING IS APPLICABLE FOR ALL PLATFORMS!
          ; The "Character Set" setting specifies the character set and encoding
          ; used for naming files. If this setting is commented out, defaults
          ; will be used as follows:
          ; Windows: The system active code page (CP_ACP)
          ; UNIX: latin1
          ; z/OS: ccsid1047
          ; To see the available character encodings, run 'psuniconv -usage'
          ;Character Set=latin1

          ;-------------------------------------------------------------------------
          ; WINDOWS PLATFORM ONLY:
          ; Suppress App Error Box: After an application error occurs, suppress the
          ; console's Application Error dialog box.
          Suppress App Error Box=Y

          ;-------------------------------------------------------------------------
          ; DbFlags Bitfield
          ;
          ; Bit Flag
          ; --- ----
          ; 1 - Ignore metaSQL to update database statistics(shared with COBOL)
          ; 2 - Ignore Truncate command for DB2Unix, use Delete instead
          ; 4 - Disable Second DB Connection
          ; 8 - Disable Persistent Secondary DB Connection
          ; 16 - not yet allocated
          ; 32 - not yet allocated
          ; 64 - not yet allocated
          ; 128 - not yet allocated
          ; 256 - not yet allocated
          DbFlags=0

          [Integration Broker]
          ;=========================================================================
          ; General settings for the Integration Broker
          ;=========================================================================
          ; Minimum size of message data for synchronous handler to enable compression.
          Min Message Size For Compression=100000

          ; Thread Pool Size used by SyncRequest PeopleCode event.
          ; The Minimum value is 1 and maximum allowable is 20.
          Thread Pool Size=5

          [Search]
          ;=========================================================================
          ; Text-Search settings
          ;=========================================================================
          ; If no option is provided, the application server will automatically
          ; select the preferred mechanism for the deployment platform.
          ; 1 - Search module bound to an application server
          ; 2 - Search module in same machine as the application server
          ; 3 - Search module bound to remote search domain
          Deployment Type=

          ; These settings are used to delegate text searches to a search server in a remote
          ; search domain. You must specify the following information in order to establish
          ; a connection to the remote search domain:
          ;     * Port used by this application server to communicate to the remote search      
          ;     server
          ;     * The ip address of the remote search server as well as the port it uses to
          ;     communicate with this application server and
          ;     * Finally, the search server's DomainID. It can be found in the
          ;     [Domain Settings] section of the search domain's configuration file
          ;     (pssrchsrv.cfg).
          ; For instance,
          ; Application Server Port=7777
          ; Remote Search Server Credentials=SRCHSERV|srchsrv_computer:7778
          ; indicates that a Search Domain with Domain ID 'SRCHSERV' is running on 'srchsrv_computer', listening on port 7778
          Application Server Port=7777
          Remote Search Server Credentials=

          [Search Indexes]
          ;=========================================================================
          ; Text-Search index settings
          ;=========================================================================
          ; Search indexes can be given alternate locations if there is an entry here.
          ; Entries look like: IndexName=fs location (ie EMPLOYEE=c:\temp)

          [PSRENSRV]
          ;=========================================================================
          ; Event notification server settings
          ;=========================================================================
          ; REN Server log trace level. Use Error, Warning, Notice, or Debug.
          log_severity_level=Warning

          ; REN Server buffer size for HTTP output. Must not exceed 65536.
          io_buffer_size=8192

          ; REN Servers place these values in the database when creating
          ; out-of-the-box initialization parameters.
          ; If commented out, the values "7180" and "peoplesoft.com" are used.
          default_http_port=7180
          default_https_port=7143
          default_auth_token=peoplesoft.com

          [PSPPMSRV]
          ;=========================================================================
          ; Settings for PSPPMSRV
          ;=========================================================================

          ;-------------------------------------------------------------------------
          ; UBBGEN settings
          ; Since Performance Collators do not advertise services Max and Min
          ; Instances must always be equal
          Min Instances=1
          Max Instances=1
          ;

          Do I need to specify PS_MACH in path variable?
          Sometimes the domain can run when i set the environment variable path as server and client . But it should set as client right ?
          • 17. Re: Peoplesoft Application Server Administration Booting Error Occurs
            961245
            I go to C:\PT8.52\appserv to run psadmin.exe.
            • 18. Re: Peoplesoft Application Server Administration Booting Error Occurs
              Nicolas.Gasparotto
              958260 wrote:
              Here's the psappsrv.cfg,

              [Startup]
              ;=========================================================================
              ; Database Signon settings
              ;=========================================================================
              DBName=HR84
              ...
              Domain ID=ORCL
              ...
              According to these settings, the database name is HR84 and the domain is ORCL. However I undesrtood earlier in this thread that was the other way around, your database name is ORCL, isn't it ?
              Add to PATH=C:\app\L31004\product\11.2.0\home2\BIN
              Is it a 32bit Oracle client ?

              Nicolas.
              • 20. Re: Peoplesoft Application Server Administration Booting Error Occurs
                Nicolas.Gasparotto
                958260 wrote:
                Yes.
                What yes ? Should I be a dentist to get the detailed response out of your mouth ?

                Nicolas.
                • 21. Re: Peoplesoft Application Server Administration Booting Error Occurs
                  961245
                  database name ORCL
                  32 bit Oracle client

                  please don't be mad
                  • 22. Re: Peoplesoft Application Server Administration Booting Error Occurs
                    Nicolas.Gasparotto
                    958260 wrote:
                    database name ORCL
                    Ok, your dbname is ORCL, but in your psappsrv.cfg you showed us above, it is HR84... and the domain name is ORCL in that file...
                    How can it work ?

                    Nicolas.
                    1 2 Previous Next