This content has been marked as final. Show 3 replies
Is this the correct way? Is "MAP3367N SUN36G" indeed the serial number of the whole StorEdge 3300?
That is the `type` that was placed by the format command onto one of the 36GB drives that happens to be inside that array enclosure. No more, no less.
Disk serial numbers are rarely used for any service entitlement (if that is an eventual goal of your inquiry to the hardware). But ...
While attempting to interpret your actual forum question:
If you are simply trying to get some sort of hardware information that is somewhat unique to each disk drive, then try to use iostat instead.
may get you the information you want.
At least, give it a try and compare its output with what you have already tried. Compare iostat's output with what might actually be printed on a disk's paper manufacturer's label.
It would seem that the array documentation is of some help.
Glance through the Sun StorEdge 3000 Family CLI 2.5 User’s Guide:
I found that here:
It seems that the sccli command line utility can possibly get you to where you might want to be. See Chapter #1 of that document where it describes how to log into the array.