10 Replies Latest reply: Nov 30, 2012 10:14 PM by sb92075 RSS

    unable to install oracle11g database on windows7 in silent mode.

    951126
      I am trying to install oracle11g in silent mode with response files (db_install.rsp)(windows7).
      I am using the following command

      setup -silent -responseFile FilePath\db_install.rsp.
      I am getting the following error.
      please wait ... several - email address not specified

      these are the values are specified in response file for emailaddresl. oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
      oracle.install.db.config.starterdb.dbcontrol.emailAddress=
      oracle.install.db.config.starterdb.dbcontrol.SMTPServer=


      even we tried differen options for below properties.
      every time we are getting the same error
      please wait ... several - email address not specified


      Please help us how to solve the issue.


      thanks in advance
        • 1. Re: unable to install oracle11g database on windows7 in silent mode.
          Srini Chavali-Oracle
          Pl identify exact versions of "11g" and "Windows 7" - pl also post the complete response file being used.

          These MOS Docs may be relevant

          "Preparing to launch Oracle Universal Installer from /tmp/OraInstall... Please wait ...$ [SEVERE] - Email Address Not Specified" errors while installing Oracle database 11gR2 in silent mode [ID 883714.1]
          Silent Installation Fails with "SEVERE: Email Address Not Specified" [ID 1087998.1]
          Email Address Not Specified prompt during silent install [ID 1109245.1]

          HTH
          Srini
          • 2. Re: unable to install oracle11g database on windows7 in silent mode.
            951126
            Please find the response file we used for silent installation.
            and we used Oracle 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64)
            and we are able to install same software in GUI mode.


            ####################################################################
            ## Copyright(c) Oracle Corporation 1998,2008. All rights reserved.##
            ## ##
            ## Specify values for the variables listed below to customize ##
            ## your installation. ##
            ## ##
            ## Each variable is associated with a comment. The comment ##
            ## can help to populate the variables with the appropriate ##
            ## values.                                   ##
            ## ##
            ## IMPORTANT NOTE: This file contains plain text passwords and ##
            ## should be secured to have read permission only by oracle user ##
            ## or db administrator who owns this installation. ##
            ## ##
            ####################################################################

            #------------------------------------------------------------------------------
            # Do not change the following system generated value.
            #------------------------------------------------------------------------------
            oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0

            #------------------------------------------------------------------------------
            # Specify the installation option.
            # It can be one of the following:
            # 1. INSTALL_DB_SWONLY
            # 2. INSTALL_DB_AND_CONFIG
            # 3. UPGRADE_DB
            #-------------------------------------------------------------------------------
            oracle.install.option=INSTALL_DB_AND_CONFIG

            #-------------------------------------------------------------------------------
            # Specify the hostname of the system as set during the install. It can be used
            # to force the installation to use an alternative hostname rather than using the
            # first hostname found on the system. (e.g., for systems with multiple hostnames
            # and network interfaces)
            #-------------------------------------------------------------------------------
            ORACLE_HOSTNAME=

            #-------------------------------------------------------------------------------
            # Specify the Unix group to be set for the inventory directory.
            #-------------------------------------------------------------------------------
            UNIX_GROUP_NAME=

            #-------------------------------------------------------------------------------
            # Specify the location which holds the inventory files.
            # This is an optional parameter if installing on
            # Windows based Operating System.
            #-------------------------------------------------------------------------------
            INVENTORY_LOCATION=

            #-------------------------------------------------------------------------------
            # Specify the languages in which the components will be installed.
            #
            # en : English ja : Japanese
            # fr : French ko : Korean
            # ar : Arabic es : Latin American Spanish
            # bn : Bengali lv : Latvian
            # pt_BR: Brazilian Portuguese lt : Lithuanian
            # bg : Bulgarian ms : Malay
            # fr_CA: Canadian French es_MX: Mexican Spanish
            # ca : Catalan no : Norwegian
            # hr : Croatian pl : Polish
            # cs : Czech pt : Portuguese
            # da : Danish ro : Romanian
            # nl : Dutch ru : Russian
            # ar_EG: Egyptian zh_CN: Simplified Chinese
            # en_GB: English (Great Britain) sk : Slovak
            # et : Estonian sl : Slovenian
            # fi : Finnish es_ES: Spanish
            # de : German sv : Swedish
            # el : Greek th : Thai
            # iw : Hebrew zh_TW: Traditional Chinese
            # hu : Hungarian tr : Turkish
            # is : Icelandic uk : Ukrainian
            # in : Indonesian vi : Vietnamese
            # it : Italian
            #
            # Example : SELECTED_LANGUAGES=en,fr,ja
            #------------------------------------------------------------------------------
            SELECTED_LANGUAGES=en

            #------------------------------------------------------------------------------
            # Specify the complete path of the Oracle Home.
            #------------------------------------------------------------------------------
            ORACLE_HOME=D:\silentinstallation\oracleinstallation

            #------------------------------------------------------------------------------
            # Specify the complete path of the Oracle Base.
            #------------------------------------------------------------------------------
            ORACLE_BASE=

            #------------------------------------------------------------------------------
            # Specify the installation edition of the component.
            #
            # The value should contain only one of these choices.
            # EE : Enterprise Edition
            # SE : Standard Edition
            # SEONE : Standard Edition One
            # PE : Personal Edition (WINDOWS ONLY)
            #------------------------------------------------------------------------------
            oracle.install.db.InstallEdition=SE

            #------------------------------------------------------------------------------
            # This variable is used to enable or disable custom install.
            #
            # true : Components mentioned as part of 'customComponents' property
            # are considered for install.
            # false : Value for 'customComponents' is not considered.
            #------------------------------------------------------------------------------
            oracle.install.db.isCustomInstall=false

            #------------------------------------------------------------------------------
            # This variable is considered only if 'IsCustomInstall' is set to true.
            #
            # Description: List of Enterprise Edition Options you would like to install.
            #
            # The following choices are available. You may specify any
            # combination of these choices. The components you choose should
            # be specified in the form "internal-component-name:version"
            # Below is a list of components you may specify to install.
            #
            # oracle.rdbms.partitioning:11.2.0.1.0 - Oracle Partitioning
            # oracle.rdbms.dm:11.2.0.1.0 - Oracle Data Mining
            # oracle.rdbms.dv:11.2.0.1.0 - Oracle Database Vault
            # oracle.rdbms.lbac:11.2.0.1.0 - Oracle Label Security
            # oracle.rdbms.rat:11.2.0.1.0 - Oracle Real Application Testing
            # oracle.oraolap:11.2.0.1.0 - Oracle OLAP
            #------------------------------------------------------------------------------
            oracle.install.db.customComponents=oracle.server:11.2.0.1.0,oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,oracle.rdbms.dv:11.2.0.1.0,orcle.rdbms.lbac:11.2.0.1.0,oracle.rdbms.rat:11.2.0.1.0

            ###############################################################################
            # #
            # PRIVILEGED OPERATING SYSTEM GROUPS      #
            # ------------------------------------------ #
            # Provide values for the OS groups to which OSDBA and OSOPER privileges #
            # needs to be granted. If the install is being performed as a member of the #          
            # group "dba", then that will be used unless specified otherwise below.     #
            # #
            # The value to be specified for OSDBA and OSOPER group is only for UNIX based #
            # based Operating System. #
            # #
            ###############################################################################

            #------------------------------------------------------------------------------
            # The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
            #------------------------------------------------------------------------------
            oracle.install.db.DBA_GROUP=

            #------------------------------------------------------------------------------
            # The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
            #------------------------------------------------------------------------------
            oracle.install.db.OPER_GROUP=

            #------------------------------------------------------------------------------
            # Specify the cluster node names selected during the installation.
            # Example : oracle.install.db.CLUSTER_NODES=node1,node2
            #------------------------------------------------------------------------------
            oracle.install.db.CLUSTER_NODES=

            #------------------------------------------------------------------------------
            # Specify the type of database to create.
            # It can be one of the following:
            # - GENERAL_PURPOSE/TRANSACTION_PROCESSING
            # - DATA_WAREHOUSE
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.type=

            #------------------------------------------------------------------------------
            # Specify the Starter Database Global Database Name.
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.globalDBName=

            #------------------------------------------------------------------------------
            # Specify the Starter Database SID.
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.SID=

            #------------------------------------------------------------------------------
            # Specify the Starter Database character set.
            #
            # It can be one of the following:
            # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
            # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
            # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
            # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
            # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
            # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
            # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.characterSet=AL32UTF8

            #------------------------------------------------------------------------------
            # This variable should be set to true if Automatic Memory Management
            # in Database is desired.
            # If Automatic Memory Management is not desired, and memory allocation
            # is to be done manually, then set it to false.
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.memoryOption=true

            #------------------------------------------------------------------------------
            # Specify the total memory allocation for the database. Value(in MB) should be
            # at least 256 MB, and should not exceed the total physical memory available
            # on the system.
            # Example: oracle.install.db.config.starterdb.memoryLimit=512
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.memoryLimit=

            #------------------------------------------------------------------------------
            # This variable controls whether to load Example Schemas onto the starter
            # database or not.
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.installExampleSchemas=false

            #------------------------------------------------------------------------------
            # This variable includes enabling audit settings, configuring password profiles
            # and revoking some grants to public. These settings are provided by default.
            # These settings may also be disabled.
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.enableSecuritySettings=true

            ###############################################################################
            # #
            # Passwords can be supplied for the following four schemas in the     #
            # starter database:                               #
            # SYS #
            # SYSTEM #
            # SYSMAN (used by Enterprise Manager) #
            # DBSNMP (used by Enterprise Manager) #
            # #
            # Same password can be used for all accounts (not recommended)           #
            # or different passwords for each account can be provided (recommended) #
            # #
            ###############################################################################

            #------------------------------------------------------------------------------
            # This variable holds the password that is to be used for all schemas in the
            # starter database.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.password.ALL=

            #-------------------------------------------------------------------------------
            # Specify the SYS password for the starter database.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.password.SYS=

            #-------------------------------------------------------------------------------
            # Specify the SYSTEM password for the starter database.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.password.SYSTEM=

            #-------------------------------------------------------------------------------
            # Specify the SYSMAN password for the starter database.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.password.SYSMAN=

            #-------------------------------------------------------------------------------
            # Specify the DBSNMP password for the starter database.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.password.DBSNMP=

            #-------------------------------------------------------------------------------
            # Specify the management option to be selected for the starter database.
            # It can be one of the following:
            # 1. GRID_CONTROL
            # 2. DB_CONTROL
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.control=DB_CONTROL

            #-------------------------------------------------------------------------------
            # Specify the Management Service to use if Grid Control is selected to manage
            # the database.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=

            #-------------------------------------------------------------------------------
            # This variable indicates whether to receive email notification for critical
            # alerts when using DB control.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false

            #-------------------------------------------------------------------------------
            # Specify the email address to which the notifications are to be sent.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.dbcontrol.emailAddress=

            #-------------------------------------------------------------------------------
            # Specify the SMTP server used for email notifications.
            #-------------------------------------------------------------------------------
            #oracle.install.db.config.starterdb.dbcontrol.SMTPServer=


            ###############################################################################
            # #
            # SPECIFY BACKUP AND RECOVERY OPTIONS      #
            # ------------------------------------          #
            # Out-of-box backup and recovery options for the database can be mentioned #
            # using the entries below.                              #     
            # #
            ###############################################################################

            #------------------------------------------------------------------------------
            # This variable is to be set to false if automated backup is not required. Else
            # this can be set to true.
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.automatedBackup.enable=false

            #------------------------------------------------------------------------------
            # Regardless of the type of storage that is chosen for backup and recovery, if
            # automated backups are enabled, a job will be scheduled to run daily at
            # 2:00 AM to backup the database. This job will run as the operating system
            # user that is specified in this variable.
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.automatedBackup.osuid=

            #-------------------------------------------------------------------------------
            # Regardless of the type of storage that is chosen for backup and recovery, if
            # automated backups are enabled, a job will be scheduled to run daily at
            # 2:00 AM to backup the database. This job will run as the operating system user
            # specified by the above entry. The following entry stores the password for the
            # above operating system user.
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.automatedBackup.ospwd=

            #-------------------------------------------------------------------------------
            # Specify the type of storage to use for the database.
            # It can be one of the following:
            # - FILE_SYSTEM_STORAGE
            # - ASM_STORAGE
            #------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.storageType=

            #-------------------------------------------------------------------------------
            # Specify the database file location which is a directory for datafiles, control
            # files, redo logs.
            #
            # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=

            #-------------------------------------------------------------------------------
            # Specify the backup and recovery location.
            #
            # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM
            #-------------------------------------------------------------------------------
            oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=

            #-------------------------------------------------------------------------------
            # Specify the existing ASM disk groups to be used for storage.
            #
            # Applicable only when oracle.install.db.config.starterdb.storage=ASM
            #-------------------------------------------------------------------------------
            oracle.install.db.config.asm.diskGroup=

            #-------------------------------------------------------------------------------
            # Specify the password for ASMSNMP user of the ASM instance.
            #
            # Applicable only when oracle.install.db.config.starterdb.storage=ASM_SYSTEM
            #-------------------------------------------------------------------------------
            oracle.install.db.config.asm.ASMSNMPPassword=

            #------------------------------------------------------------------------------
            # Specify the My Oracle Support Account Username.
            #
            # Example : MYORACLESUPPORT_USERNAME=metalink
            #------------------------------------------------------------------------------
            MYORACLESUPPORT_USERNAME=

            #------------------------------------------------------------------------------
            # Specify the My Oracle Support Account Username password.
            #
            # Example : MYORACLESUPPORT_PASSWORD=password
            #------------------------------------------------------------------------------
            MYORACLESUPPORT_PASSWORD=

            #------------------------------------------------------------------------------
            # Specify whether to enable the user to set the password for
            # My Oracle Support credentials. The value can be either true or false.
            # If left blank it will be assumed to be false.
            #
            # Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
            #------------------------------------------------------------------------------
            SECURITY_UPDATES_VIA_MYORACLESUPPORT=

            #------------------------------------------------------------------------------
            # Specify whether user doesn't want to configure Security Updates.
            # The value for this variable should be true if you don't want to configure
            # Security Updates, false otherwise.
            #
            # The value can be either true or false. If left blank it will be assumed
            # to be false.
            #
            # Example : DECLINE_SECURITY_UPDATES=false
            #------------------------------------------------------------------------------
            DECLINE_SECURITY_UPDATES=

            #------------------------------------------------------------------------------
            # Specify the Proxy server name. Length should be greater than zero.
            #
            # Example : PROXY_HOST=proxy.domain.com
            #------------------------------------------------------------------------------
            PROXY_HOST=

            #------------------------------------------------------------------------------
            # Specify the proxy port number. Should be Numeric and atleast 2 chars.
            #
            # Example : PROXY_PORT=25
            #------------------------------------------------------------------------------
            PROXY_PORT=

            #------------------------------------------------------------------------------
            # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
            # blank if your proxy server requires no authentication.
            #
            # Example : PROXY_USER=username
            #------------------------------------------------------------------------------
            PROXY_USER=

            #------------------------------------------------------------------------------
            # Specify the proxy password. Leave PROXY_USER and PROXY_PWD
            # blank if your proxy server requires no authentication.
            #
            # Example : PROXY_PWD=password
            #------------------------------------------------------------------------------
            PROXY_PWD=


            Thanks
            Avinash
            • 3. Re: unable to install oracle11g database on windows7 in silent mode.
              Srini Chavali-Oracle
              Which version of Win 7 ? Pl note that Home versions re not certified for database installs. Have you reviewed the MOS Docs above ? Looks like a lot of required parameters have not been set in the response file

              HTH
              Srini
              • 4. Re: unable to install oracle11g database on windows7 in silent mode.
                Helios-GunesEROL
                Hi
                1. As asked before mention your win7 version.
                2. Check what Srini has been posted
                3. Refer installation doc slient installation part
                4. You can also refer:
                http://hugepang.wordpress.com/2011/06/21/oracle-11gr2-silent-installation/
                http://anuj-singh.blogspot.com/2011/12/oracle-11g-r2-silent-install-using-only.html

                Regard
                Helios
                • 5. Re: unable to install oracle11g database on windows7 in silent mode.
                  951126
                  Thanks for your information.
                  based on given reference urls updated the response file
                  we modified following properties.

                  oracle.install.option=INSTALL_DB_SWONLY
                  UNIX_GROUP_NAME=oinstall
                  INVENTORY_LOCATION=/oracle/OraInventory
                  ORACLE_HOME=/oracle/product/11.2.0/template
                  ORACLE_BASE=/oracle
                  oracle.install.db.InstallEdition=EE
                  oracle.install.db.DBA_GROUP=dba
                  oracle.install.db.OPER_GROUP=dba
                  DECLINE_SECURITY_UPDATES=true


                  we are successfully installed Oracle11g database in windows7 64bit in silent mode.
                  one more proble we are facing we are unable to connect to databse from SQL prompt.
                  we got the following exception

                  sql>connect sys as sysdba
                  password:
                  ORA-12560: TNS:protocol adapter error
                  we have not supplied any password,SID,and port number(default 1521) in response file.now our response file is like this.

                  we are tried to change the passoword for the below property in response file. still we are getting the same error
                  ORA-12560: TNS:protocol adapter error

                  oracle.install.db.config.starterdb.password.ALL=welcome1

                  ####################################################################
                  ## Copyright(c) Oracle Corporation 1998,2008. All rights reserved.##
                  ## ##
                  ## Specify values for the variables listed below to customize ##
                  ## your installation. ##
                  ## ##
                  ## Each variable is associated with a comment. The comment ##
                  ## can help to populate the variables with the appropriate ##
                  ## values.                                   ##
                  ## ##
                  ## IMPORTANT NOTE: This file contains plain text passwords and ##
                  ## should be secured to have read permission only by oracle user ##
                  ## or db administrator who owns this installation. ##
                  ## ##
                  ####################################################################

                  #------------------------------------------------------------------------------
                  # Do not change the following system generated value.
                  #------------------------------------------------------------------------------
                  oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0

                  #------------------------------------------------------------------------------
                  # Specify the installation option.
                  # It can be one of the following:
                  # 1. INSTALL_DB_SWONLY
                  # 2. INSTALL_DB_AND_CONFIG
                  # 3. UPGRADE_DB
                  #-------------------------------------------------------------------------------
                  oracle.install.option=INSTALL_DB_SWONLY

                  #-------------------------------------------------------------------------------
                  # Specify the hostname of the system as set during the install. It can be used
                  # to force the installation to use an alternative hostname rather than using the
                  # first hostname found on the system. (e.g., for systems with multiple hostnames
                  # and network interfaces)
                  #-------------------------------------------------------------------------------
                  ORACLE_HOSTNAME=

                  #-------------------------------------------------------------------------------
                  # Specify the Unix group to be set for the inventory directory.
                  #-------------------------------------------------------------------------------
                  UNIX_GROUP_NAME=

                  #-------------------------------------------------------------------------------
                  # Specify the location which holds the inventory files.
                  # This is an optional parameter if installing on
                  # Windows based Operating System.
                  #-------------------------------------------------------------------------------
                  INVENTORY_LOCATION=D:\silentinstallation\oracle\OraInventory

                  #-------------------------------------------------------------------------------
                  # Specify the languages in which the components will be installed.
                  #
                  # en : English ja : Japanese
                  # fr : French ko : Korean
                  # ar : Arabic es : Latin American Spanish
                  # bn : Bengali lv : Latvian
                  # pt_BR: Brazilian Portuguese lt : Lithuanian
                  # bg : Bulgarian ms : Malay
                  # fr_CA: Canadian French es_MX: Mexican Spanish
                  # ca : Catalan no : Norwegian
                  # hr : Croatian pl : Polish
                  # cs : Czech pt : Portuguese
                  # da : Danish ro : Romanian
                  # nl : Dutch ru : Russian
                  # ar_EG: Egyptian zh_CN: Simplified Chinese
                  # en_GB: English (Great Britain) sk : Slovak
                  # et : Estonian sl : Slovenian
                  # fi : Finnish es_ES: Spanish
                  # de : German sv : Swedish
                  # el : Greek th : Thai
                  # iw : Hebrew zh_TW: Traditional Chinese
                  # hu : Hungarian tr : Turkish
                  # is : Icelandic uk : Ukrainian
                  # in : Indonesian vi : Vietnamese
                  # it : Italian
                  #
                  # Example : SELECTED_LANGUAGES=en,fr,ja
                  #------------------------------------------------------------------------------
                  SELECTED_LANGUAGES=en

                  #------------------------------------------------------------------------------
                  # Specify the complete path of the Oracle Home.
                  #------------------------------------------------------------------------------
                  ORACLE_HOME=D:\silentinstallation\oracle2\oracleinstallation

                  #------------------------------------------------------------------------------
                  # Specify the complete path of the Oracle Base.
                  #------------------------------------------------------------------------------
                  ORACLE_BASE=D:\silentinstallation\oracle2

                  #------------------------------------------------------------------------------
                  # Specify the installation edition of the component.
                  #
                  # The value should contain only one of these choices.
                  # EE : Enterprise Edition
                  # SE : Standard Edition
                  # SEONE : Standard Edition One
                  # PE : Personal Edition (WINDOWS ONLY)
                  #------------------------------------------------------------------------------
                  oracle.install.db.InstallEdition=SE

                  #------------------------------------------------------------------------------
                  # This variable is used to enable or disable custom install.
                  #
                  # true : Components mentioned as part of 'customComponents' property
                  # are considered for install.
                  # false : Value for 'customComponents' is not considered.
                  #------------------------------------------------------------------------------
                  oracle.install.db.isCustomInstall=false

                  #------------------------------------------------------------------------------
                  # This variable is considered only if 'IsCustomInstall' is set to true.
                  #
                  # Description: List of Enterprise Edition Options you would like to install.
                  #
                  # The following choices are available. You may specify any
                  # combination of these choices. The components you choose should
                  # be specified in the form "internal-component-name:version"
                  # Below is a list of components you may specify to install.
                  #
                  # oracle.rdbms.partitioning:11.2.0.1.0 - Oracle Partitioning
                  # oracle.rdbms.dm:11.2.0.1.0 - Oracle Data Mining
                  # oracle.rdbms.dv:11.2.0.1.0 - Oracle Database Vault
                  # oracle.rdbms.lbac:11.2.0.1.0 - Oracle Label Security
                  # oracle.rdbms.rat:11.2.0.1.0 - Oracle Real Application Testing
                  # oracle.oraolap:11.2.0.1.0 - Oracle OLAP
                  #------------------------------------------------------------------------------
                  oracle.install.db.customComponents=oracle.server:11.2.0.1.0,oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,oracle.rdbms.dv:11.2.0.1.0,orcle.rdbms.lbac:11.2.0.1.0,oracle.rdbms.rat:11.2.0.1.0

                  ###############################################################################
                  # #
                  # PRIVILEGED OPERATING SYSTEM GROUPS      #
                  # ------------------------------------------ #
                  # Provide values for the OS groups to which OSDBA and OSOPER privileges #
                  # needs to be granted. If the install is being performed as a member of the #          
                  # group "dba", then that will be used unless specified otherwise below.     #
                  # #
                  # The value to be specified for OSDBA and OSOPER group is only for UNIX based #
                  # based Operating System. #
                  # #
                  ###############################################################################

                  #------------------------------------------------------------------------------
                  # The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
                  #------------------------------------------------------------------------------
                  oracle.install.db.DBA_GROUP=dba

                  #------------------------------------------------------------------------------
                  # The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
                  #------------------------------------------------------------------------------
                  oracle.install.db.OPER_GROUP=dba

                  #------------------------------------------------------------------------------
                  # Specify the cluster node names selected during the installation.
                  # Example : oracle.install.db.CLUSTER_NODES=node1,node2
                  #------------------------------------------------------------------------------
                  oracle.install.db.CLUSTER_NODES=

                  #------------------------------------------------------------------------------
                  # Specify the type of database to create.
                  # It can be one of the following:
                  # - GENERAL_PURPOSE/TRANSACTION_PROCESSING
                  # - DATA_WAREHOUSE
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.type=

                  #------------------------------------------------------------------------------
                  # Specify the Starter Database Global Database Name.
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.globalDBName=

                  #------------------------------------------------------------------------------
                  # Specify the Starter Database SID.
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.SID=

                  #------------------------------------------------------------------------------
                  # Specify the Starter Database character set.
                  #
                  # It can be one of the following:
                  # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
                  # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
                  # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
                  # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
                  # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
                  # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
                  # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.characterSet=AL32UTF8

                  #------------------------------------------------------------------------------
                  # This variable should be set to true if Automatic Memory Management
                  # in Database is desired.
                  # If Automatic Memory Management is not desired, and memory allocation
                  # is to be done manually, then set it to false.
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.memoryOption=true

                  #------------------------------------------------------------------------------
                  # Specify the total memory allocation for the database. Value(in MB) should be
                  # at least 256 MB, and should not exceed the total physical memory available
                  # on the system.
                  # Example: oracle.install.db.config.starterdb.memoryLimit=512
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.memoryLimit=

                  #------------------------------------------------------------------------------
                  # This variable controls whether to load Example Schemas onto the starter
                  # database or not.
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.installExampleSchemas=false

                  #------------------------------------------------------------------------------
                  # This variable includes enabling audit settings, configuring password profiles
                  # and revoking some grants to public. These settings are provided by default.
                  # These settings may also be disabled.
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.enableSecuritySettings=true

                  ###############################################################################
                  # #
                  # Passwords can be supplied for the following four schemas in the     #
                  # starter database:                               #
                  # SYS #
                  # SYSTEM #
                  # SYSMAN (used by Enterprise Manager) #
                  # DBSNMP (used by Enterprise Manager) #
                  # #
                  # Same password can be used for all accounts (not recommended)           #
                  # or different passwords for each account can be provided (recommended) #
                  # #
                  ###############################################################################

                  #------------------------------------------------------------------------------
                  # This variable holds the password that is to be used for all schemas in the
                  # starter database.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.password.ALL=welcome1

                  #-------------------------------------------------------------------------------
                  # Specify the SYS password for the starter database.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.password.SYS=

                  #-------------------------------------------------------------------------------
                  # Specify the SYSTEM password for the starter database.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.password.SYSTEM=

                  #-------------------------------------------------------------------------------
                  # Specify the SYSMAN password for the starter database.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.password.SYSMAN=

                  #-------------------------------------------------------------------------------
                  # Specify the DBSNMP password for the starter database.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.password.DBSNMP=

                  #-------------------------------------------------------------------------------
                  # Specify the management option to be selected for the starter database.
                  # It can be one of the following:
                  # 1. GRID_CONTROL
                  # 2. DB_CONTROL
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.control=DB_CONTROL

                  #-------------------------------------------------------------------------------
                  # Specify the Management Service to use if Grid Control is selected to manage
                  # the database.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=

                  #-------------------------------------------------------------------------------
                  # This variable indicates whether to receive email notification for critical
                  # alerts when using DB control.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false

                  #-------------------------------------------------------------------------------
                  # Specify the email address to which the notifications are to be sent.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.dbcontrol.emailAddress=false

                  #-------------------------------------------------------------------------------
                  # Specify the SMTP server used for email notifications.
                  #-------------------------------------------------------------------------------
                  # oracle.install.db.config.starterdb.dbcontrol.SMTPServer=mail.hover.com


                  ###############################################################################
                  # #
                  # SPECIFY BACKUP AND RECOVERY OPTIONS      #
                  # ------------------------------------          #
                  # Out-of-box backup and recovery options for the database can be mentioned #
                  # using the entries below.                              #     
                  # #
                  ###############################################################################

                  #------------------------------------------------------------------------------
                  # This variable is to be set to false if automated backup is not required. Else
                  # this can be set to true.
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.automatedBackup.enable=false

                  #------------------------------------------------------------------------------
                  # Regardless of the type of storage that is chosen for backup and recovery, if
                  # automated backups are enabled, a job will be scheduled to run daily at
                  # 2:00 AM to backup the database. This job will run as the operating system
                  # user that is specified in this variable.
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.automatedBackup.osuid=

                  #-------------------------------------------------------------------------------
                  # Regardless of the type of storage that is chosen for backup and recovery, if
                  # automated backups are enabled, a job will be scheduled to run daily at
                  # 2:00 AM to backup the database. This job will run as the operating system user
                  # specified by the above entry. The following entry stores the password for the
                  # above operating system user.
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.automatedBackup.ospwd=

                  #-------------------------------------------------------------------------------
                  # Specify the type of storage to use for the database.
                  # It can be one of the following:
                  # - FILE_SYSTEM_STORAGE
                  # - ASM_STORAGE
                  #------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.storageType=

                  #-------------------------------------------------------------------------------
                  # Specify the database file location which is a directory for datafiles, control
                  # files, redo logs.
                  #
                  # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=

                  #-------------------------------------------------------------------------------
                  # Specify the backup and recovery location.
                  #
                  # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=

                  #-------------------------------------------------------------------------------
                  # Specify the existing ASM disk groups to be used for storage.
                  #
                  # Applicable only when oracle.install.db.config.starterdb.storage=ASM
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.asm.diskGroup=

                  #-------------------------------------------------------------------------------
                  # Specify the password for ASMSNMP user of the ASM instance.
                  #
                  # Applicable only when oracle.install.db.config.starterdb.storage=ASM_SYSTEM
                  #-------------------------------------------------------------------------------
                  oracle.install.db.config.asm.ASMSNMPPassword=

                  #------------------------------------------------------------------------------
                  # Specify the My Oracle Support Account Username.
                  #
                  # Example : MYORACLESUPPORT_USERNAME=metalink
                  #------------------------------------------------------------------------------
                  MYORACLESUPPORT_USERNAME=

                  #------------------------------------------------------------------------------
                  # Specify the My Oracle Support Account Username password.
                  #
                  # Example : MYORACLESUPPORT_PASSWORD=password
                  #------------------------------------------------------------------------------
                  MYORACLESUPPORT_PASSWORD=

                  #------------------------------------------------------------------------------
                  # Specify whether to enable the user to set the password for
                  # My Oracle Support credentials. The value can be either true or false.
                  # If left blank it will be assumed to be false.
                  #
                  # Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
                  #------------------------------------------------------------------------------
                  SECURITY_UPDATES_VIA_MYORACLESUPPORT=

                  #------------------------------------------------------------------------------
                  # Specify whether user doesn't want to configure Security Updates.
                  # The value for this variable should be true if you don't want to configure
                  # Security Updates, false otherwise.
                  #
                  # The value can be either true or false. If left blank it will be assumed
                  # to be false.
                  #
                  # Example : DECLINE_SECURITY_UPDATES=false
                  #------------------------------------------------------------------------------
                  DECLINE_SECURITY_UPDATES=true

                  #------------------------------------------------------------------------------
                  # Specify the Proxy server name. Length should be greater than zero.
                  #
                  # Example : PROXY_HOST=proxy.domain.com
                  #------------------------------------------------------------------------------
                  PROXY_HOST=

                  #------------------------------------------------------------------------------
                  # Specify the proxy port number. Should be Numeric and atleast 2 chars.
                  #
                  # Example : PROXY_PORT=25
                  #------------------------------------------------------------------------------
                  PROXY_PORT=

                  #------------------------------------------------------------------------------
                  # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
                  # blank if your proxy server requires no authentication.
                  #
                  # Example : PROXY_USER=username
                  #------------------------------------------------------------------------------
                  PROXY_USER=

                  #------------------------------------------------------------------------------
                  # Specify the proxy password. Leave PROXY_USER and PROXY_PWD
                  # blank if your proxy server requires no authentication.
                  #
                  # Example : PROXY_PWD=password
                  #------------------------------------------------------------------------------
                  PROXY_PWD=




                  Thanks
                  Avinash.
                  • 6. Re: unable to install oracle11g database on windows7 in silent mode.
                    Srini Chavali-Oracle
                    Pl ensure that environment variables are set correctly before invoking sqlplus. Pl see this MOS Doc

                    Connect As Sysdba On Windows Fails With ORA-12560: TNS:protocol adapter error [ID 989716.1]

                    HTH
                    Srini
                    • 7. Re: unable to install oracle11g database on windows7 in silent mode.
                      951126
                      we checked all options but still we are unable to connect to database after silent installations.
                      please suggest a solution.

                      Thanks
                      Avinash
                      • 8. Re: unable to install oracle11g database on windows7 in silent mode.
                        sb92075
                        948123 wrote:
                        we checked all options but still we are unable to connect to database after silent installations.
                        please suggest a solution.

                        Thanks
                        Avinash
                        my car won't go
                        please suggest a solution.


                        is COPY & PASTE broken for you?

                        what error code & message reports this failure?
                        • 9. Re: unable to install oracle11g database on windows7 in silent mode.
                          951126
                          I am able to connect now.

                          Thank you very much.
                          • 10. Re: unable to install oracle11g database on windows7 in silent mode.
                            sb92075
                            948123 wrote:
                            I am able to connect now.

                            Thank you very much.
                            THANKS for sharing your solution so others may benefit.