This content has been marked as final. Show 8 replies
Hi.1 person found this helpful
tank/share wlii use SSd as cache also.
All avalable hardware resource at one pool ( disk; cache (Read-zilla); Log-device ( Write-zilla) ) shared between al dataset ( FS) on this pool.
thanks for the quick reply.
Thanks for considering a redundant ZFS storage pool (you'll be glad you did).
A few more things to think about:
1. Although a RAIDZ pool maximizes space, this pool configuration is best for large I/Os like
streaming video. Mirrored pools are better for small reads and writes. If you are looking for
best performance, you should test this config with your workload.
2. Consider that a separate log device is best for improving NFS synchronous write performance.
3. Consider that a separate cache device is best for improving read performance.
I've have been slowly going over a lot of the documentation.
I will be adding 1-2 SSD's for caching, i may use one as a log device, i'm not sure yet. I only have 6 hotswap bays in this rack unit, so running separate mirrored pools for the shares with smaller files to improve performance is not going to happen. I'm limited by my network bandwidth anyhow so I'm not too worried about it. I went with what I thought was the most optimal configuration for what I have and I'm happy with that, the main thing was redundant storage, and dual parity was a must after I had a raid5 fail on me last year.
One thing I've noticed, I have network drives connected to the shares on the solaris box from my windows machine, for some reason, Windows is reporting the drives to be 6.57 tb when on solaris it reports as 7.1tb
It was reporting as 7.1tb on Windows before. the only thing thats changed is i've created a couple sub file systems on the pool. is this normal? or is windows just reporting incorrectly?
If you're okay with RAIDZ2 performance then that's fine. This is a large pool (7.1 TBs?) so
be sure that you have good backups and you are monitoring for disk failures and other
Regarding the space discrepancy between Windows and Solaris, are you looking at the
7.1 TB with zpool list or zfs list?
i was looking at df -h, but here's the other two. still new to me
solaris@SRV-DATA:/tank/users$ zpool list
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
rpool 232G 10.9G 221G 4% 1.00x ONLINE -
tank 10.9T 3.62T 7.26T 33% 1.00x ONLINE -
solaris@SRV-DATA:/tank/users$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 11.1G 217G 4.90M /rpool
rpool/ROOT 4.54G 217G 31K legacy
rpool/ROOT/solaris 4.54G 217G 4.03G /
rpool/ROOT/solaris-backup-1 108K 217G 3.68G /
rpool/ROOT/solaris-backup-1/var 42K 217G 202M /var
rpool/ROOT/solaris/var 296M 217G 203M /var
rpool/VARSHARE 264K 217G 264K /var/share
rpool/dump 4.13G 217G 4.00G -
rpool/export 377M 217G 32K /export
rpool/export/home 377M 217G 32K /export/home
rpool/export/home/solaris 377M 217G 377M /export/home/solaris
rpool/swap 2.06G 217G 2.00G -
tank 2.41T 4.72T 1.43T /tank
tank/movies 67.9K 4.72T 67.9K /tank/movies
tank/music 67.9K 750G 67.9K /tank/music
tank/shared 232G 268G 232G /tank/shared
tank/stuff 333G 167G 333G /tank/stuff
tank/users 438G 4.72T 114G /tank/users
tank/users/* 6.52G 18.5G 6.52G /tank/users/*
tank/users/* 1.18G 23.8G 1.18G /tank/users/*
solaris@SRV-DATA:/tank/users$ df -h
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris 228G 4.0G 217G 2% /
/devices 0K 0K 0K 0% /devices
/dev 0K 0K 0K 0% /dev
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 1.5G 1.5M 1.5G 1% /system/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
221G 4.0G 217G 2% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
228G 203M 217G 1% /var
swap 1.6G 128M 1.5G 8% /tmp
rpool/VARSHARE 228G 267K 217G 1% /var/share
rpool/export 228G 32K 217G 1% /export
rpool/export/home 228G 32K 217G 1% /export/home
228G 377M 217G 1% /export/home/solaris
rpool 228G 4.9M 217G 1% /rpool
tank 7.1T 1.4T 4.7T 24% /tank
tank/music 750G 68K 750G 1% /tank/music
tank/shared 500G 232G 268G 47% /tank/shared
/export/home/solaris 218G 377M 217G 1% /home/solaris
tank/stuff 500G 333G 167G 67% /tank/stuff
tank/users 7.1T 129G 4.7T 3% /tank/users
tank/users/* 25G 6.5G 18G 27% /tank/users/*
tank/users/* 25G 1.2G 24G 5% /tank/users/*
tank/movies 7.1T 67K 4.7T 1% /tank/movies
My best guess is that there is going to be space discrepancies between Windows and ZFS.
I don't know because I never use Windows but for legacy commands like du and df, they
are unaware of descendent ZFS file systems and so on.
Let's get back to the RAIDZ space issue though. Some amount of pool space will be consumed
by RAIDZ parity so what is available at the pool level will be different (and smaller) than
what it available to the pool's file systems.
I have a good explanation here:
ZFS Storage Pool Space Reporting
See the RAIDZ storage pool bullet. The raw pool size is 408 GB but the space
that is available to the file systems is 133 GB.
You should also review the ZFS best practices section, here:
well, i understand that some will be used for the parity. if you look at the details I posted above, there's 10.8T when you look at zpool info, but only 7.1T when you look at du, this makes sense because of the parity and formatting
but now it seems to have shrunk...significantly, I did set quotas on a couple slices, but i was under the impression those wouldn't affect it. either way, im sure it's working the way its supposed to, i'm not too concerned. it just seemed odd that it seems to have shrunk
actually, im looking at it now, i see why
its because the child systems are shared, and they're reporting the free space on the parent pool as the disk size, it's odd, but it is correct when i look at the numbers
Edited by: Stlouis1 on Dec 13, 2012 2:59 PM