This discussion is archived
2 Replies Latest reply: Dec 19, 2012 5:23 AM by Cutdb RSS

this is a unusual error when i try to install cluster 4.1 on the solairs 11

Cutdb Newbie
Currently Being Moderated
Hi ,everyon, I want to learn Cluster 4.1 & Solairs 11.
this is my first use that OS .
thsi are two nodes machines, I got a error when to create a cluster.
=====================
node name: sunos1,sunos2
OS: Solaris 11.1
Cluster Soft version: ORACL solaris cluster 4.1

this are some error on the first node (sunos1) as follows :

>>> Cluster Nodes <<<

This Oracle Solaris Cluster release supports a total of up to 16
nodes.

List the names of the other nodes planned for the initial cluster
configuration. List one node name per line. When finished, type
Control-D:

Node name: sunos1
Node name: sunos2
Node name (Control-D to finish): ^D


This is the complete list of nodes:

sunos1
sunos2

Is it correct (yes/no) [yes]?


Attempting to contact "sunos2" ... done

Checking whether NWAM is enabled on local node ...

Searching for a remote configuration method ... done

The remote shell (see rsh(1)) will be used for remote execution.

Checking whether NWAM is enabled on all nodes ...

Error: NWAM is enabled on node "sunos2".

NWAM is incompatible with the cluster software. Issue the command
"netadm enable -p ncp defaultfixed", to disable NWAM on these nodes.
Then try again to configure the cluster. Do not attempt to enable NWAM
after the cluster is established.

I can ensure other node is disable NWAM, I don't know why has this erro.
Please someone give me a hint .Thanks


root@sunos2:~# netadm list
TYPE PROFILE STATE
ncp Automatic disabled
ncp DefaultFixed online
loc Automatic offline
loc NoNet offline
loc DefaultFixed online
  • 1. Re: this is a unusual error when i try to install cluster 4.1 on the solairs 11
    Filip Francis Journeyer
    Currently Being Moderated
    Hi there,


    You need to run this on both systems
    netadm enable -p ncp DefaultFixed
    and recreate you ip address.
    I think you are using nwam for them moment but you need to use fixed ip address so first disable nwam and then you create a fixed address for you server with
    ipadm create-ip <interface>
    ipadm create-addr -T static -a local=<ipaddress>/<netmaks> <interface>v4

    And then you can try again the cluster

    Regards
    Filip Francis
  • 2. Re: this is a unusual error when i try to install cluster 4.1 on the solairs 11
    Cutdb Newbie
    Currently Being Moderated
    Show me os Network configuration
    root@sunos1:~# ipadm show-addr
    ADDROBJ TYPE STATE ADDR
    lo0/v4 static ok 127.0.0.1/8
    net0/v4 static ok 192.168.56.30/24
    net3/v4 static ok 192.168.56.31/24
    root@sunos1:~# netadm list
    TYPE PROFILE STATE
    ncp Automatic disabled
    ncp DefaultFixed online
    loc Automatic offline
    loc NoNet offline
    loc DefaultFixed online
    root@sunos1:~# hostname
    sunos1

    root@sunos2:~$ ipadm show-addr
    ADDROBJ TYPE STATE ADDR
    lo0/v4 static ok 127.0.0.1/8
    net0/v4 static ok 192.168.56.40/24
    net1/v4 static ok 192.168.56.41/24
    root@sunos2:~$ netadm list
    TYPE PROFILE STATE
    ncp Automatic disabled
    ncp DefaultFixed online
    loc Automatic offline
    loc NoNet offline
    loc DefaultFixed online
    root@sunos2:~$ hostname
    sunos2

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points