2 Replies Latest reply: Dec 19, 2012 7:23 AM by Cutdb RSS

    this is a unusual error when i try to install cluster 4.1 on the solairs 11

    Cutdb
      Hi ,everyon, I want to learn Cluster 4.1 & Solairs 11.
      this is my first use that OS .
      thsi are two nodes machines, I got a error when to create a cluster.
      =====================
      node name: sunos1,sunos2
      OS: Solaris 11.1
      Cluster Soft version: ORACL solaris cluster 4.1

      this are some error on the first node (sunos1) as follows :

      >>> Cluster Nodes <<<

      This Oracle Solaris Cluster release supports a total of up to 16
      nodes.

      List the names of the other nodes planned for the initial cluster
      configuration. List one node name per line. When finished, type
      Control-D:

      Node name: sunos1
      Node name: sunos2
      Node name (Control-D to finish): ^D


      This is the complete list of nodes:

      sunos1
      sunos2

      Is it correct (yes/no) [yes]?


      Attempting to contact "sunos2" ... done

      Checking whether NWAM is enabled on local node ...

      Searching for a remote configuration method ... done

      The remote shell (see rsh(1)) will be used for remote execution.

      Checking whether NWAM is enabled on all nodes ...

      Error: NWAM is enabled on node "sunos2".

      NWAM is incompatible with the cluster software. Issue the command
      "netadm enable -p ncp defaultfixed", to disable NWAM on these nodes.
      Then try again to configure the cluster. Do not attempt to enable NWAM
      after the cluster is established.

      I can ensure other node is disable NWAM, I don't know why has this erro.
      Please someone give me a hint .Thanks


      root@sunos2:~# netadm list
      TYPE PROFILE STATE
      ncp Automatic disabled
      ncp DefaultFixed online
      loc Automatic offline
      loc NoNet offline
      loc DefaultFixed online
        • 1. Re: this is a unusual error when i try to install cluster 4.1 on the solairs 11
          Filip Francis
          Hi there,


          You need to run this on both systems
          netadm enable -p ncp DefaultFixed
          and recreate you ip address.
          I think you are using nwam for them moment but you need to use fixed ip address so first disable nwam and then you create a fixed address for you server with
          ipadm create-ip <interface>
          ipadm create-addr -T static -a local=<ipaddress>/<netmaks> <interface>v4

          And then you can try again the cluster

          Regards
          Filip Francis
          • 2. Re: this is a unusual error when i try to install cluster 4.1 on the solairs 11
            Cutdb
            Show me os Network configuration
            root@sunos1:~# ipadm show-addr
            ADDROBJ TYPE STATE ADDR
            lo0/v4 static ok 127.0.0.1/8
            net0/v4 static ok 192.168.56.30/24
            net3/v4 static ok 192.168.56.31/24
            root@sunos1:~# netadm list
            TYPE PROFILE STATE
            ncp Automatic disabled
            ncp DefaultFixed online
            loc Automatic offline
            loc NoNet offline
            loc DefaultFixed online
            root@sunos1:~# hostname
            sunos1

            root@sunos2:~$ ipadm show-addr
            ADDROBJ TYPE STATE ADDR
            lo0/v4 static ok 127.0.0.1/8
            net0/v4 static ok 192.168.56.40/24
            net1/v4 static ok 192.168.56.41/24
            root@sunos2:~$ netadm list
            TYPE PROFILE STATE
            ncp Automatic disabled
            ncp DefaultFixed online
            loc Automatic offline
            loc NoNet offline
            loc DefaultFixed online
            root@sunos2:~$ hostname
            sunos2