1 Reply Latest reply: Jan 9, 2013 2:37 PM by bigdelboy RSS

    Sun T5220 MB/CMP0/MCU1 Disabled

    977111
      Right now I have 4x1GB dimms in a T5220. The system starts up and says it has 1920MB.

      This is what happens when I run the show faulty command.

      -> show faulty
      Target | Property | Value
      -----------------------------------------------------------------------------
      /SP/faultmgmt/0 | fru | /SYS/MB
      /SP/faultmgmt/0/ | sunw-msg-id | PCIEX-8000-3S
      faults/0 | |
      /SP/faultmgmt/0/ | uuid | 5e01a74d-f733-e771-e197-d4e20b57
      faults/0 | | 4c73
      /SP/faultmgmt/0/ | timestamp | Jan 07 20:20:58
      faults/0 | |
      /SP/faultmgmt/1 | fru | /SYS
      /SP/faultmgmt/1/ | timestamp | Jan 07 20:23:13
      faults/0 | |
      /SP/faultmgmt/1/ | sp_detected_fault | Jan 7 20:23:13 ERROR:
      faults/0 | | Operating with a degraded
      | | memory configuration.
      /SP/faultmgmt/1/ | timestamp | Jan 07 20:21:25
      faults/1 | |
      /SP/faultmgmt/1/ | sp_detected_fault | /SYS/MB/CMP0/MCU1 Forced fail
      faults/1 | | (Link Training)


      I was able to get it to pass VTS with 16x1GB dimms installed. However, it still had the same error.

      What's going on here?