2 Replies Latest reply: Jan 14, 2013 1:24 AM by 984266 RSS

    M3000: show-disks doesn't show all disk.

    984266
      Hi all,

      I have to setup one M3000, when I want to create a devalias, I type show-disks, but it doesn't show all the disk, it only show 2
      a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
      b) /pci@0,600000/pci@0/pci@0/scsi@0/disk

      So, a is disk0 1 2 3 ?
      and
      b is disk 0 1 2 3?

      thanks

      Please help
      ====================================================

      {0} ok probe-scsi-all
      /pci@0,600000/pci@0/pci@8/SUNW,qlc@0
      QLogic QLE2560 Host Adapter FCode(SPARC): 2.03 06/30/08
      Wait for link up -

      Firmware version 4.03.02
      Fibre Channel Link down
      Possible causes: No cable, incorrect connection mode or data rate
      SFP state: 8Gb Present

      /pci@0,600000/pci@0/pci@0/scsi@0

      MPT Version 1.05, Firmware Version 1.31.00.00

      Target 0
      Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
      SASAddress 50000393e813d912 PhyNum 0
      Target 1
      Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
      SASAddress 50000393d84aaf3e PhyNum 1
      Target 2
      Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
      SASAddress 50000393d84ab082 PhyNum 2
      Target 3
      Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
      SASAddress 50000393e8392a42 PhyNum 3
      Target 4
      Unit 0 Removable Read Only device TEAC DV-W28S-W J.0A
      SATA device PhyNum 4


      {0} ok
      {0} ok show-disks
      a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
      b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
      c) /iscsi-hba/disk
      q) NO SELECTION
      Enter Selection, q to quit: a
      /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk has been selected.
      Type ^Y ( Control-Y ) to insert it in the command line.
      e.g. ok nvalias mydev ^Y
      for creating devalias mydev for /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
      {0} ok