This discussion is archived
13 Replies Latest reply: Jan 11, 2013 4:03 AM by 984033 RSS

Weblogic installed successfully but Oracle Forms 11g doesn't run

984033 Newbie
Currently Being Moderated
Good morning everyone! How are you feeling?
So, yesterday I installed the both ones on my computes, using the Windows 7 OS in a boot camp in a Macbook.

Well,
I've tested the weblogic + forms 11g, and when I try to access the link to make some test with the weblogic appears for me that Weblogic was installed with success..
but only with the pattern link, like http://mymachine:9100/forms/frmservlet

in this page it's everything ok according with the weblogic I guess..
but when I try to run the forms from Oracle Forms 11g, the forms opens the internet explorer, appears two words "ORACLE FORMS", but afters the page is not showed for me..

appears to me that "Internet Explorer cannot display the webpage"

I really don't know what I can do... because in one part is everything ok, but maybe left some part in some file to configure I think.


Thank you all..
Victor
  • 1. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    Christian Erlinger Guru
    Currently Being Moderated
    Lets start with the obvious ones: did you start WLS_FORMS and did it come up successfully?

    cheers
  • 2. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    984033 Newbie
    Currently Being Moderated
    Yes sure,

    I've started the WLS_FORMS with success.

    tks!

    Edited by: 981030 on 10/01/2013 02:50
  • 3. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    Christian Erlinger Guru
    Currently Being Moderated
    OK, so the testform (http://localhost:9001/forms/frmservlet) runs fine, does it? If it does then how do you start your forms application? Did you create/edit the webconfig in the formsweb.cfg to suit your needs?

    cheers
  • 4. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    984033 Newbie
    Currently Being Moderated
    hm...Yes, the testform runs fine... now, I didn't edit the formsweb.cfg because I thought that I didn't need...
    What exactly I've to edit there? I need to edit something?

    My formsweb.cfg it's like that:

    >

    formsweb.cfg

    # $Id: formsweb.cfg /main/164 2010/10/19 05:20:53 atyagi Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # -----------------
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # ---------------
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.example.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Forms runtime argument: BIDI digitSubstitution
    digitSubstitution=context
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=obr=%obr% record=%record% tracegroup=%tracegroup% log=%log% term=%term% ssoProxyConnect=
    %ssoProxyConnect%
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Fusion Middleware Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=codebase
    # Forms applet parameter
    width=750
    # Forms applet parameter
    height=600
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    allowAlertClipboard=true
    # Forms applet parameter
    disableValidateClipboard=false
    # Forms applet parameter
    highContrast=false
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=
    # Forms applet parameter, valid range [0-3]
    guiMode=0
    # Forms applet parameter
    restrictedURLparams=pageTitle,HTMLbodyAttrs,HTMLbeforeForm,HTMLafterForm,log
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0

    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/6u12/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_12
    # Applet parameter for Sun's Java Plugin
    legacy_lifecycle=false
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # Single Sign-On parameter: indicates whether session should operate in proxy
    # user support or not. Specify ssoProxyConnect=yes to enable for particular application.
    ssoProxyConnect=no
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=false
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    # Config for javascript integration
    applet_name=
    enableJavascriptEvent=true
    # Config variable that will indicate if heartbeat will
    # be blocked when a javascript call is a blocking call.
    # The default value if false, i.e heart beat will not be
    # blocked for any javascript calls.
    JavaScriptBlocksHeartBeat=false
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.example.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic

    # Example Named Configuration Section
    # Example 2: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is
    # only installed with the Forms Builder and is also available for download
    # from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTML=webutilbase.htm
    baseHTMLjpi=webutiljpi.htm
    archive=frmall.jar
    lookAndFeel=oracle
    >

    cheers ;)
  • 5. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    tony.g Journeyer
    Currently Being Moderated
    So how were you trying to run a specific form?


    Tony
  • 6. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    984033 Newbie
    Currently Being Moderated
    Tony,
    I'm trying to run the form with the Oracle Forms 11g, normally, like I'd started to create a new one.


    Seems to me that the Java Applications doesn't run when I want to run from oracle forms builder app.
    It's strange.
  • 7. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    tony.g Journeyer
    Currently Being Moderated
    But what command line/url are you invoking in the browser to make the form run?
  • 8. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    984033 Newbie
    Currently Being Moderated
    >
    But what command line/url are you invoking in the browser to make the form run?
    When I run the forms, I usually call it from Forms Builder, it calls the internet explorer using an encrypted url, but only in the end.. it's like this:

    >
    http://localhost:50830/Dadasj348wWE323EWRWWE
    >

    And after that call, it's directed to this one:
    >
    http://machine:9001/forms/frmservlet
    >

    and appears - Internet Explorer cannot display the webpage.


    I believe that the Oracle Forms Builder just sent to Weblogic the url to invoke the forms right?

    Edited by: 981030 on 10/01/2013 04:11
  • 9. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    tony.g Journeyer
    Currently Being Moderated
    SO if you try:

    http://machine:9001/forms/frmservlet?form=yourtestform

    Does it run your form then (assuming that you have se the FORMS_PATH in your env file)?

    Tony
  • 10. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    Michael Ferrante (Oracle) Guru Moderator
    Currently Being Moderated
    Open the browser (IE) settings:

    Tools > Internet options... > Advanced (tab) > scroll down to "Security"

    Check the box that says "Allow active content to run in files on My Computer"

    Click OK to save the changes. Close all open browsers then retest.
  • 11. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    984033 Newbie
    Currently Being Moderated
    Great Tony, now works perfectly.

    Thank you.
  • 12. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    984033 Newbie
    Currently Being Moderated
    Just one another question..
    Works using the link specifying the Form's name..

    but calling from Oracle Forms not works yet..
    This setting is inside of formsweb.cfg?

    Tks
  • 13. Re: Weblogic installed successfully but Oracle Forms 11g doesn't run
    984033 Newbie
    Currently Being Moderated
    I've tried to do work using this url:

    http://machine:9001/forms/frmservlet?form=yourtestform

    It shows that it's working perfectly.


    Now I've to learn how to set to run my forms directly from Oracle Forms 11g.
    Because the webpage doesn't appear to me when I call from it.

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points