This discussion is archived
2 Replies Latest reply: Jan 13, 2013 11:24 PM by 984266 RSS

M3000: show-disks doesn't show all disk.

984266 Newbie
Currently Being Moderated
Hi all,

I have to setup one M3000, when I want to create a devalias, I type show-disks, but it doesn't show all the disk, it only show 2
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk

So, a is disk0 1 2 3 ?
and
b is disk 0 1 2 3?

thanks

Please help
====================================================

{0} ok probe-scsi-all
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0
QLogic QLE2560 Host Adapter FCode(SPARC): 2.03 06/30/08
Wait for link up -

Firmware version 4.03.02
Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate
SFP state: 8Gb Present

/pci@0,600000/pci@0/pci@0/scsi@0

MPT Version 1.05, Firmware Version 1.31.00.00

Target 0
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e813d912 PhyNum 0
Target 1
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84aaf3e PhyNum 1
Target 2
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84ab082 PhyNum 2
Target 3
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e8392a42 PhyNum 3
Target 4
Unit 0 Removable Read Only device TEAC DV-W28S-W J.0A
SATA device PhyNum 4


{0} ok
{0} ok show-disks
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
c) /iscsi-hba/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
{0} ok

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points