4 Replies Latest reply: Jan 16, 2013 3:59 AM by user13643597 RSS

    ZFS add disk a pool

    user13643597
      In a one machine and I try add one disk to rpool:

      #zpool status
      pool: rpool
      state: ONLINE
      scan: none requested
      config:

      NAME STATE READ WRITE CKSUM
      rpool ONLINE 0 0 0
      c0d0s0 ONLINE 0 0 0

      errors: No known data errors

      #format -e c0d9
      .
      .
      .
      selecting c0d9
      [disk formatted]
      format> label
      [0] SMI Label
      [1] EFI Label
      Specify Label type[0]:
      Ready to label disk, continue? yes

      format> ver

      Primary label contents:

      Volume name = < >
      ascii name = <EMC-SYMMETRIX-5773 cyl 37998 alt 2 hd 15 sec 128>
      pcyl = 38000
      ncyl = 37998
      acyl = 2
      nhead = 15
      nsect = 128
      Part Tag Flag Cylinders Size Blocks
      0 root wm 0 - 37997 34.79GB (37998/0/0) 72956160
      1 unassigned wu 0 0 (0/0/0) 0
      2 backup wu 0 - 37997 34.79GB (37998/0/0) 72956160
      3 unassigned wm 0 0 (0/0/0) 0
      4 unassigned wm 0 0 (0/0/0) 0
      5 unassigned wm 0 0 (0/0/0) 0
      6 unassigned wm 0 0 (0/0/0) 0
      7 unassigned wm 0 0 (0/0/0) 0


      #zpool add rpool c0d9s0
      cannot add to 'rpool': root pool can not have multiple vdevs or separate logs
      #zpool add rpool c0d9
      cannot label 'c0d9': EFI labeled devices are not supported on root pools.

      This machine is a LDOM, I read have a bug:6852962 in same cases Re: ZFS root mirroring, unable to attach mirror disk
      but I have this patch (142909-17) installed.


      I dont have any message in /var/adm/messages

      Any help...
        • 1. Re: ZFS add disk a pool
          SteveS
          'rpool' is special with regards to the valid configurations we allow. With the rpool, you can only have single vdevs or mirrors. You cannot create a concat/stripe or raidz rpool. If your intention is to create a mirror, use:

          # zpool attach rpool c0d0s0 c0d9s0
          • 2. Re: ZFS add disk a pool
            user13643597
            Thanks Steve,


            About your explanation, I dont want create a mirror, just expand a pool. Probably is better create other pool.
            I just try do this because in other case I have one zone and I add one disk to this zone.
            • 3. Re: ZFS add disk a pool
              Cindys-Oracle
              You are welcome to create a new pool but one comment is that you can increase the size of the root pool
              disk by outright replacing it with a larger disk or attaching a larger disk and detaching the smaller disk.
              The steps are documented, here:

              http://docs.oracle.com/cd/E26502_01/html/E29007/gjtuk.html#ghzvz

              I believe that after the disk is detached, the root pool space is expanded. If not, set the auto expand
              property, like this:

              # zpool set autoexpand=on pool

              Thanks, Cindy
              • 4. Re: ZFS add disk a pool
                user13643597
                Yes, its true but my problem is the disk I try add is smaller than the pool :(
                I create other pool.

                Thanks.