I have a problem using a JCOP J3A081 chip.
The chip (NXP P5CC080HN, Package HVQFN32) ist in FUSE STATE: not fused and I can boot it without problems. But the CardManager is not selectable:
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B F8 13 00 00 81 31 FE 45 4A 43 4F 50 76 32 34 ;.....1.EJCOPv24
31 B7 1.
T = 1
Sending a case 2 APDU brings the same result as the case 1 apdu at the bottom of the log above: File not found.
I have no idea what to do now. Is there probably a known address where the CardManager AID could be read after booting?
Thank very much you for your suggestions.
I would preclude the reader, since the communication to the chip seems to work.
Unfortunately I cannot try with another chip, since this is the only sample I have here. Therefore I do not want to try to fuse this one until it works.
In the simulation the selection of the CardManager works after booting. But that won't help me with my hardware. :-(