This discussion is archived
6 Replies Latest reply: Feb 3, 2013 9:21 AM by ck RSS

Title on Main Window.

ocpdev Newbie
Currently Being Moderated
Hi All!

I m using Forms 11gr2, and want to show Company Name on the top of the Main Window, i.e. above my menu bar.

Previously I was using following built-in in Forms 6i successfully;
SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW,TITLE,'Company Name'),

but now, it instead show two titles
-- https url of form (above my menu bar).
--Oracle Fusion Middleware title (above https url of form),
which ultimately decreases my main windows size.

My second problem is how to hide these two titles/windows ? This will also increase my windows size.

Please guide me.

Thanks & Regards.

Edited by: ocpdev on Jan 12, 2013 7:57 PM
  • 1. Re: Title on Main Window.
    ck Explorer
    Currently Being Moderated
    Try to change the parameter in the formsweb.cfg

    http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/basics.htm#BABGEGBC

    and this for all the parameter you may need.

    http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/configure.htm#i1077054
  • 2. Re: Title on Main Window.
    ocpdev Newbie
    Currently Being Moderated
    Thanks for suggestion.
  • 3. Re: Title on Main Window.
    ocpdev Newbie
    Currently Being Moderated
    Sir,

    I set parameter guiMode=3 in formsweb.cfg file, as per the link you send me and restarted the pc as well.
    But still default Windows Titles are shown as previously.
    Pl guide me again.

    Thanks.
  • 4. Re: Title on Main Window.
    ck Explorer
    Currently Being Moderated
    Did you create new config? And that config is the same in your form builder preferences??
    Can you paste your formsweb.cfg here?
  • 5. Re: Title on Main Window.
    ocpdev Newbie
    Currently Being Moderated
    Sir,

    I didn't understand your meaning of creating of config . Is it Forms Installation and Configuration? I have configured after the installation successfully.

    Now, please note my following formsweg.cfg file:

    # $Id: formsweb.cfg /main/164 2010/10/19 05:20:53 atyagi Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # -----------------
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # ---------------
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.example.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env

    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Forms runtime argument: BIDI digitSubstitution
    digitSubstitution=context
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=obr=%obr% record=%record% tracegroup=%tracegroup% log=%log% term=%term% ssoProxyConnect=%ssoProxyConnect%
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=

    # HTML page title
    pageTitle=Oracle Fusion Middleware Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=

    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=codebase
    # Forms applet parameter
    width=100%
    # Forms applet parameter
    height=100%
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    allowAlertClipboard=true
    # Forms applet parameter
    disableValidateClipboard=false
    # Forms applet parameter
    highContrast=false
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=
    # Forms applet parameter, valid range [0-3]
    guiMode=3
    # Forms applet parameter
    restrictedURLparams=pageTitle,HTMLbodyAttrs,HTMLbeforeForm,HTMLafterForm,log
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar,frmicons.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0


    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/6u12/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_12
    # Applet parameter for Sun's Java Plugin
    legacy_lifecycle=false

    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # Single Sign-On parameter: indicates whether session should operate in proxy
    # user support or not. Specify ssoProxyConnect=yes to enable for particular application.
    ssoProxyConnect=no

    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true

    # EndUserMonitoring

    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=false

    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=

    # Config for javascript integration
    applet_name=
    enableJavascriptEvent=true

    # Config variable that will indicate if heartbeat will
    # be blocked when a javascript call is a blocking call.
    # The default value if false, i.e heart beat will not be
    # blocked for any javascript calls.
    JavaScriptBlocksHeartBeat=false

    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.example.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic


    # Example Named Configuration Section
    # Example 2: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug

    # Sample configuration for deploying WebUtil. Note that WebUtil is
    # only installed with the Forms Builder and is also available for download
    # from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTML=webutilbase.htm
    baseHTMLjpi=webutiljpi.htm
    archive=frmall.jar,frmicons.jar
    lookAndFeel=oracle


    I want to ask one thing more. I have two formsweb.cfg files in following paths:

    F:\Oracle\Middleware\user_projects\domains\ClassicDomain2\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.2\config.

    F:\Oracle\Middleware\user_projects\domains\ClassicDomain2\servers\WLS_FORMS\tmp\_WL_user\formsapp_11.1.2\wb1h9f\config.

    Can you give me differences in these two files?

    Thanks in advance.
  • 6. Re: Title on Main Window.
    ck Explorer
    Currently Being Moderated
    hello,

    sorry for delay reply .. been busy but to give you hint how to configure your formsweb.cfg

    this is only sample..

    http://fdtool.free.fr/LAF/doc/implementation.htm

    hope you give on idea.

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points