This content has been marked as final. Show 2 replies
The cable and terminal appears fine as I unplugged the DB9 plug from the Sun StorEdge 3511No one Sun servers have same connector as 3511. ( DB9 femail). So possible point of problem - gender changer.
and plug into another Sun server and just change the baud rate then I can get response from the Sun server,
but unplug it and plug it back to the Sun StorEdge 3511 and change back to 38400 and no response.
What state of all LED on Controller ?
Your array have single or dual controller ?
It's not supported as JBOD, but should work. IMHO.
Also I got a stupid question on a CSM200 disk array, I think it is an expansion tray as there is no management port on it. Can they work independently without controller as a jbod dumb unit? Or attaching a controller is necessary?The simple answer is "not supported".
And I doubt that this will work anyway because the CSM200 have IOMs with their firmware able to talk to the controllers but not necessarily to simple initiators. Anyway, setting up such unsupported configurations will for sure lead to unpredictable issues. The data integrity would not be guaranteed.