This content has been marked as final. Show 9 replies
Is that server on the HCL? Oracle VM doesn't support many non-Oracle servers.
Server is not listed on the HCL, but that doesn't mean that it won't work. As I previously mentioned, 2.2.1 worked without issue.
Oracle VM 3 is entirely different from 2.2.1.
take a look at the release notes for 3.2.1 There are few instances in which you have to specify different boot parameters for the installation to work.
You might have a MEGARAID product.
If you are installing Oracle VM Server on a Sun Fire X4800, you must provide extra parameters when
booting from the installation media (CDROM or ISO file), or when using a kickstart installation. These
parameters allow the megaraid_sas driver to load correctly.
If booting from the installation media, press F2 when the initial boot screen is displayed and provide the
following additional parameters as part of the boot command:
mboot.c32 xen.gz extra_guest_irqs=64,2048 nr_irqs=2048 --- vmlinuz --- initrd.img
If using a kickstart installation, add the additional kernel parameters to the PXE configuration file.
I am going to take this for a test drive, I will report back.
Same result... as before.
OVM Server 3.1.1 fails just the same.
Edited by: SBaugher on Feb 20, 2013 11:52 AM
Megaraid is a LSI product.
I have seen some weird things happen when tape drives are on the same zone as your FC SAN. Do you have any tape drives connected?
No tape drives.
Curiously, while installing 3.0.2, I noted that the following scsi drivers were loaded... shpchp driver, mptbase driver, mptspi driver, ata_piix driver, qla2xxx driver.
During the install of 3.1.1 and 3.2.1, only the following scsi drivers are loaded before rebooting... sg driver and usb storage driver (no usb storage on server).
As was mentioned before, 3.x is entirely different than 2.x.
It's worth noting the only happy OVM customers I've heard of (and we've looked far and wide to find them) are running Oracle servers on Oracle storage to host Oracle applications. Everybody else (including us; we have an EMC storage array) run in to problems that take forever to resolve, if they're ever resolved.
I would be wary of running that setup in production.
This is a strictly test environment. I have settled on running 3.0.2 for now and will worry about upgrading at a later date.