We inserted three new memory boards (16GB each) into M4000, but only two memory board show, and the other two are deconfigured.
Below is the part of the result of showhardconf:
* MEMB#0 Status:Deconfigured; Ver:0101h; Serial:BF1014790K ;
+ FRU-Part-Number:CF00541-0545 09 /541-0545-09 ;
* MEM#0A Status:Deconfigured;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522b0942;
What could be the possible cause of this?
How can I have the other two memory modules to be seen on the server?
You may consult the "Server Service Manual" on the M4000 server library documentation http://docs.oracle.com/cd/E19855-01/ . The DIMMs should be installed in 2/4/8/16 groups. You have installed only 3. You should install 4 DIMMs, and each of them should be of the same type.
Edited by: Reidod on Apr 1, 2013 4:47 PM
Hi. Document ID 1019113.1 at support.oracle.com describe Memory Configuration Rules for M4000 servers.
Please show full output of showhardconf . May be it's possible create correct configuration.