5 Replies Latest reply: Apr 18, 2013 6:47 AM by ccp RSS

    ldom install with Jumpstart don't works

    mrAibo
      Hallo!
      I have an issue with ldom installation per Jumpstart.
      Got always error message:
      *Requesting Internet Address for 0:21:28:b2:dc:50
      -----
      ldm -V
      Logical Domains Manager (v 2.2.0.0)
      -----

      I created one domain ldg1 on Sun4u server:
      mkfile 10g /ldoms/ldom1
      ldm add-domain ldg1
      ldm add-mau 1 ldg1
      ldm add-vcpu 4 ldg1
      ldm add-memory 2G ldg1
      ldm add-vnet vnet1 primary-vsw0 ldg1
      ldm add-vds primary-vds0 ldg1
      ldm add-vdiskserverdevice /ldoms/ldom1 vol1@primary-vds0
      ldm add-vdisk vdisk1 vol1@primary-vds0 ldg1
      ldm set-vnet mac-addr=*MAC from my physical IF* vnet1 ldg1
      ldm set-var boot-device=vdisk1 ldg1
      ldm bind-domain ldg1
      ldm start-domain ldg1
      -----
      ifconfig vsw0
      vsw0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
      inet 10.16.1.228 netmask ffffff00 broadcast 10.16.1.255
      ether *0:21:28:b2:dc:50*
      -----
      ldm ls-bindings ldg1
      NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
      ldg1 active -t---- 5000 8 2G 14% 9s
      .
      NETWORK
      NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
      vnet1 primary-vsw0@primary 0 network@0 00:21:28:b2:dc:50 1 1500
      PEER MAC MODE PVID VID MTU LINKPROP
      primary-vsw0@primary 00:21:28:b2:dc:50 1 1500

      DISK
      NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
      vdisk1 vol1@primary-vds0 0 disk@0 primary

      VCONS
      NAME SERVICE PORT
      ldg1 primary-vcc0@primary 5000
      -----

      So, when I try to install ldg1 I got
      {0} ok boot net - install
      Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: - install
      Requesting Internet Address for 0:21:28:b2:dc:50
      ....
      ------
      {0} ok cd net
      {0} ok .properties
      local-mac-address 00 21 28 b2 dc 50
      -----

      Thank you for any help in advance!
        • 1. Re: ldom install with Jumpstart don't works
          ccp
          First, you sure you do this on 'sun4u' machine not 'sun4v'? :-)

          I am not sure setting your ldom have same MAC as your VSW is OK or not but I usually let ldm generate one, this usually have 00:14:4F:F8:XX:YY see [Assigning MAC Addresses Automatically or Manually|http://docs.oracle.com/cd/E35434_01/html/E23807/assignmacaddressesautomaticallyormanually.html#scrolltoc] for detail.

          Is this a newly set up jumpstart env.? I mean to understand if this first time you do jumpstart so we can decide where the problem is at JS or LDOM.
          • 2. Re: ldom install with Jumpstart don't works
            mrAibo
            The Server is sun4v:
            uname -a
            SunOS vsmgt01 5.10 Generic_147147-26 sun4v sparc sun4v
            I installed with this jumpstart Server several other native systems. But now I have a lack of know how with the LDom's. :(
            • 3. Re: ldom install with Jumpstart don't works
              ccp
              OK, Assume this is LDOM problem.

              I have not done any S10 installation on LDOM, so I could be wrong on some of the point.

              Did you plumb the vsw0 on the primary?

              if you did you should be able to snoop vsw0 to see if your dhcp packet leave you machine or not.

              Also at OBP you can try watch-net-all to see if your vnic work or not.
              • 4. Re: ldom install with Jumpstart don't works
                mrAibo
                ccp wrote:
                OK, Assume this is LDOM problem.

                I have not done any S10 installation on LDOM, so I could be wrong on some of the point.

                Did you plumb the vsw0 on the primary?

                if you did you should be able to snoop vsw0 to see if your dhcp packet leave you machine or not.

                Also at OBP you can try watch-net-all to see if your vnic work or not.
                So, I build the LDOM from scratch again. And I read that the primary and quest server MAC's should be different.
                -----
                root@vsmgt01:~/ > ifconfig -a
                vsw0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
                inet 10.16.1.228 netmask ffffff00 broadcast 10.16.1.255
                ether *0:21:28:b2:dc:50*
                -----

                root@vsmgt01:~/ > ldm list-bindings ldom1
                NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
                ldom1 active -t---- 5000 4 4G 25% 3m

                UUID
                0cff41f3-7373-44ff-fc95-d39ca88eaf72

                MAC
                *00:14:4f:f8:b9:5c*

                HOSTID
                0x84f8b95c

                CONTROL
                failure-policy=ignore
                extended-mapin-space=off
                cpu-arch=native

                DEPENDENCY
                master=

                CORE
                CID CPUSET
                1 (8, 9, 10, 11)

                VCPU
                VID PID CID UTIL STRAND
                0 8 1 100% 100%
                1 9 1 0.0% 100%
                2 10 1 0.0% 100%
                3 11 1 0.0% 100%

                MAU
                ID CPUSET
                1 (8, 9, 10, 11)

                MEMORY
                RA PA SIZE
                0x10000000 0x20000000 4G

                CONSTRAINT
                threading=max-throughput

                VARIABLES
                auto-boot?=true
                boot-device=vdisk1
                local-mac-address?=true

                NETWORK
                NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
                vnet0 primary-vsw0@primary 0 network@0 *00:14:4f:f8:fe:d7* 1 1500
                PEER MAC MODE PVID VID MTU LINKPROP
                primary-vsw0@primary *00:21:28:b2:dc:50* 1 1500

                DISK
                NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
                vdisk1 vol1@primary-vds0 0 disk@0 primary

                VCONS
                NAME SERVICE PORT
                ldom1 primary-vcc0@primary 5000
                -----

                {0} ok watch-net-all
                /virtual-devices@100/channel-devices@200/network@0
                Looking for Ethernet packets.
                '.' is a good packet. 'X' is a bad packet.
                Type any key to stop.
                ................................................................................................................

                -----

                On the primary I got:
                sysap01a is my jumpstartserver
                root@vsmgt01:~/ > snoop -d vsw0
                sysap01a.itsc.de -> vsmgt01 TCP D=22 S=51237 Ack=2029457971 Seq=2997586019 Len=0 Win=49640
                vsmgt01 -> sysap01a.itsc.de TCP D=51237 S=22 Push Ack=2997586019 Seq=2029457971 Len=240 Win=49640
                vsmgt01 -> sysap01.itsc.de DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysap01.itsc.de -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns02.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns02.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns03.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns03.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysap01.itsc.de DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysap01.itsc.de -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns02.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns02.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns03.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns03.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysap01.itsc.de DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysap01.itsc.de -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns02.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns02.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns03.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns03.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysap01.itsc.de DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysap01.itsc.de -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns02.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns02.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysdns03.itsc.ux.intern DNS C 27.3.0.232.in-addr.arpa. Internet PTR ?
                sysdns03.itsc.ux.intern -> vsmgt01 DNS R Error: 5(Refused)
                vsmgt01 -> sysap01a.itsc.de TCP D=51237 S=22 Push Ack=2997586019 Seq=2029458211 Len=96 Win=49640
                sysap01a.itsc.de -> vsmgt01 TCP D=22 S=51237 Ack=2029458307 Seq=2997586019 Len=0 Win=49640
                • 5. Re: ldom install with Jumpstart don't works
                  ccp
                  Sorry for delay wasy busy on work.

                  Looks like you have DNS/DHCP problem. assume you use ok> boot net:dhcp -v -- -V install. did you get an IP address for your LDOM? I am not sure what stage you are in for the snoop trace show all the DNS error.