1 Reply Latest reply: Jun 24, 2013 8:49 AM by WadhahDaouehi RSS

    how to connect ovs to a network?

    alexhonig

      hi, you all.

       

      I've installed a oracle vm server with one physical interface.

      I configured the ip:

      192.168.1.240/24 and gw 192.168.1.1

       

      but I cant connect to other computer on my network, always appear to be bond0 interface.

       

      Can someone help?


        • 1. Re: how to connect ovs to a network?
          WadhahDaouehi

          Hi,

          by default Oracle VM use the bond0 to the first interface configured, this is an advantage (used for fault tolerant network).

          So the bond0 is not a problem.

          and to solve your problem verify that your server is connected to the gateway (physically) and also verify your configuration that should looks like:

          - /etc/sysconfig/network-scripts/ifcfg-bond0

          DEVICE=bond0

          BOOTPROTO=none

          ONBOOT=yes

          IPADDR=192.168.1.240

          NETMASK=255.255.255.0

          NETWORK=192.168.1.0

          BONDING_OPTS="mode=0 miimon=250 use_carrier=1 updelay=500 downdelay=500 primary=eth0"

          - /etc/sysconfig/network-scripts/ifcfg-eth0

          #This file was dynamically created by OVM manager.           Please Do not edit

          DEVICE=eth0

          BOOTPROTO=none

          HWADDR=XX:XX:XX:XX:XX:XX

          ONBOOT=yes

          MASTER=bond0

          SLAVE=yes

          - /etc/sysconfig/network

          NETWORKING=yes

          NETWORKING_IPV6=no

          HOSTNAME=YYYYYYYYY

          GATEWAY=192.168..1.1

           

           

          I hope this can help you

          Best Regards