This discussion is archived
2 Replies Latest reply: Aug 22, 2013 9:33 AM by Srini Chavali-Oracle RSS

can any one say that list of hardware for 11gr2 2node rac installation?  thank in advance

1d324114-e6f6-4bf1-b3b3-eac6afb1e5b8 Newbie
Currently Being Moderated

can any one say that list of hardware for 11gr2 2node rac installation?  thank in advance

  • 1. Re: can any one say that list of hardware for 11gr2 2node rac installation?  thank in advance
    Pradeepcmst Journeyer
    Currently Being Moderated

    Hi ,

     

    Hardware Requirements

    • Physical memory (at least 1.5 gigabyte (GB) of RAM)
    • An amount of swap space equal to the amount of RAM
    • Temporary space (at least 1 GB) available in /tmp
    • A processor type (CPU) that is certified with the release of the Oracle software being installed
    • A minimum of 1024 x 786 display resolution, so that Oracle Universal Installer (OUI) displays correctly
    • All servers that are used in the cluster must have the same chip architecture, for example, all 32-bit processors or all 64-bit processors
    • Adequate disk space in the software installation locations to store the Oracle software

    You need at least 5.5 GB of available disk space for the Grid home directory, which includes both the binary files for Oracle Clusterware and Oracle Automatic Storage Management (Oracle ASM) and their associated log files, and at least 4 GB of available disk space for the Oracle Database home directory, or Oracle home directory.

     

    About Shared Storage

     

    These Oracle Clusterware components require the following disk space on a shared file system:

    • Three Oracle Clusterware Registry (OCR) files, 300 MB each, or 900 MB total disk space
    • Three voting disk files, 300 MB each, or 900 MB total disk space

    If you are not using Oracle ASM for storing Oracle Clusterware files, then for best performance and protection, you should use multiple disks, each using a different disk controller for voting disk file placement. Ensure that each voting disk is configured so that it does not have share any hardware device or have a single point of failure.

     

    Network Hardware Requirements

     

    When you configure the network for Oracle RAC and Oracle Clusterware, each node in the cluster must meet the following requirements:

    • Each node must have at least two network interface cards (NIC), or network adapters. One adapter is for the public network interface and the other adapter is for the private network interface (the interconnect). Install additional network adapters on a node if that node meets either of the following conditions:
      • Does not have at least two network adapters
      • Has two network interface cards but is using network attached storage (NAS). You should have a separate network adapter for NAS.
      • Has two network cards, but you want to use redundant interconnectsIn previous releases, to make use of redundant networks for the interconnect, bonding, trunking, teaming, or similar technology was required. Oracle Grid Infrastructure for a cluster and Oracle RAC can now make use of redundant network interconnects, without the use of other network technology, to enhance optimal communication in the cluster. This functionality is available starting with Oracle Database 11g Release 2 (11.2.0.2).Redundant Interconnect Usage enables load-balancing and high availability across multiple (up to 4) private networks (also known as interconnects).

     

    However, When you install Oracle software, Oracle Universal Installer (OUI) automatically performs hardware prerequisite checks and notifies you if they are not met.

     

     

    Regards,

    Pradeep. V

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points