1 2 Previous Next 15 Replies Latest reply: Sep 24, 2013 1:31 PM by WadhahDaouehi RSS

    11g installation Package error in prerequisite check stage

    Aryacool

      HI Friends,

       

         I am installing oracle 11g for single instance database.

         My OS is RHEL 5.3 64bit.

        I am getting an error in prerequisite check stage that " Package:elfutils-libelf-devel-0.125    status -failed"

                                                                                   "Package: glibc-devel-2.5    status- failed"

       

         how to fix it.

       

        i have mounted my OS and manually tried to install by command

       

      ]# rpm -Uvh elfutils-libelf-devel*

      warning: elfutils-libelf-devel-0.137-3.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

      error: Failed dependencies:

              elfutils-libelf-i386 = 0.137-3.el5 is needed by elfutils-libelf-devel-0.137-3.el5.i386

              libelf.so.1 is needed by elfutils-libelf-devel-0.137-3.el5.i386

       

      ]# rpm -Uvh elfutils-libelf*

      warning: elfutils-libelf-0.137-3.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

      Preparing...                ########################################### [100%]

              package elfutils-libelf-0.137-3.el5.x86_64 is already installed

       

       

      ]# rpm -Uvh elfutils*

      warning: elfutils-0.137-3.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

      Preparing...                ########################################### [100%]

              package elfutils-libelf-0.137-3.el5.x86_64 is already installed

              package elfutils-libs-0.137-3.el5.x86_64 is already installed

              package elfutils-0.137-3.el5.x86_64 is already installed

       

      after this also i am getting status failed please tell me how to fix these ?

       

      Thanks,

      Arya

        • 1. Re: 11g installation Package error in prerequisite check stage
          saurabh

          what can i recommend you is that install all the required packages on the server and give it a reboot. and after this try again. This might work.

          • 2. Re: 11g installation Package error in prerequisite check stage
            Pradeepcmst

            HI ,

            Query the os using " rpm -qa <required-package>  and post the result here

             

             

             

            Regards,

            Pradeep. V

            • 3. Re: 11g installation Package error in prerequisite check stage
              Dude!

              I'm not sure if it applies to the specific software you are installing right now, but packages that depend on each other need to be installed in one command and cannot be installed separately. Why are you using rpm to install software? As of RHEL 5 you should use the yum install pkgs or up2date utility to install software, which will automatically resolve software dependencies and prevent you from breaking your system.

              • 4. Re: 11g installation Package error in prerequisite check stage
                Aryacool

                Thanks for your reply

                 

                [root@Oracle11g Server]# rpm -qa elfutils-libelf-devel-0.125.rpm

                [root@oracle11g Server]# rpm -qa elfutils-libelf-devel-0.125

                [root@oracle11g Server]# rpm -qa elfutils-libelf-devel

                [root@oracle11g Server]# rpm -qa elfutils-libelf

                elfutils-libelf-0.137-3.el5

                [root@oracle11g Server]# rpm -qa elfutils

                elfutils-0.137-3.el5

                 

                [root@oracle11g Server]# rpm -qa|grep elfutils

                elfutils-0.137-3.el5

                elfutils-libs-0.137-3.el5

                elfutils-libelf-0.137-3.el5

                [root@oracle11g Server]# rpm -qa|grep elfutils-libelf

                elfutils-libelf-0.137-3.el5

                [root@oracle11g Server]# rpm -qa|grep elfutils-libelf-devel

                 

                 

                and for glibc-devel-2.5 Package

                 

                [root@oracle11g Server]# rpm -qa glibc

                glibc-2.5-34

                glibc-2.5-34

                [root@oracle11g Server]# rpm -qa|grep glibc

                glibc-common-2.5-34

                glibc-devel-2.5-34

                compat-glibc-2.3.4-2.26

                glibc-2.5-34

                compat-glibc-2.3.4-2.26

                glibc-2.5-34

                compat-glibc-headers-2.3.4-2.26

                glibc-headers-2.5-34

                 

                Regards,

                Arya

                • 5. Re: 11g installation Package error in prerequisite check stage
                  Aryacool

                  Hi thanks for your reply,

                   

                     Previously i was working on RHEL 6 and installed required package never got problem during installation of Oracle11g software for creation of database.

                   

                    But according to client specification now i am sing RHEL v5.3 . And i have installed required packages still facing problem please tell me what are the packages need to install by which i can't get the above error in my installation. It is not wise to install all the packages reside in server 5.3 please tell me required.

                   

                  Regards,

                  Arya

                  • 6. Re: 11g installation Package error in prerequisite check stage
                    Aryacool

                    Hi thanks for your reply,

                     

                      Actually i got some other Package error and i have installed it by RPM only but these above 2 package i am unable to install. And i have not that much depth knowledge in linux  admin.  Only basic that useful for a Oracle Admin.

                     

                    Regards,

                    Arya

                    • 7. Re: 11g installation Package error in prerequisite check stage
                      Pradeepcmst

                      hi Arya,

                      You said you unable to install only two packages, kindly let us know the error you getting when you trying to install

                      • 8. Re: 11g installation Package error in prerequisite check stage
                        EdStevens

                        Aryacool wrote:

                         

                        Hi thanks for your reply,

                         

                          Actually i got some other Package error and i have installed it by RPM only but these above 2 package i am unable to install. And i have not that much depth knowledge in linux  admin.  Only basic that useful for a Oracle Admin.

                         

                        Regards,

                        Arya

                        As already mentioned by Dude, if you'd use 'yum' to do the installs, you'd get everything you need in one shot.  After configuring your system to use Oracle's public yum server (see Oracle Public Yum Server ) , you would simply (as root) do this:

                         

                        # yum install oracle-validated

                         

                        That will install all necessary packages with their dependencies.

                        • 9. Re: 11g installation Package error in prerequisite check stage
                          Aryacool

                          Hi Thanks for yor reply,

                           

                          I am getting an error in prerequisite check stage that " Package:elfutils-libelf-devel-0.125    status -failed"

                                                                                                       "Package: glibc-devel-2.5    status- failed"

                           

                          Thanks & Regards,

                          Arya

                          BBSR

                          • 10. Re: 11g installation Package error in prerequisite check stage
                            Pradeepcmst

                            Hi,

                            Please post the error completely, do not trucate anything including anything what command you used to install?

                            did u download these packages separately or using yum to install?

                            If you dint configure yum , download each file separately and try installing using " rpm -ivh < package_name>

                            • 11. Re: 11g installation Package error in prerequisite check stage
                              Dude!

                              Sorry, I think that is the wrong advice. If the original poster of this thread did not configure yum they should following the instructions at http://public-yum.oracle.com/ or configure yum to read the information from the install DVD.

                               

                              Installing the oracle-validated package, as previously mentioned is the easiest way to install all software prerequisites and configure the Oracle account and necessary system parameters.

                               

                              Regarding the error, please see the following thread, the solution was already mentioned

                              error while  installing rpm elfutils-libelf-devel package

                              • 12. Re: 11g installation Package error in prerequisite check stage
                                Pradeepcmst

                                Hi dude,

                                Even ill use yum to install packages as its very easy. But sometimes one or two packages will throw error like this, i downloaded those missing packages alone separately , installed using rpm -ivh and got succeeded. may be yum saves time. Ultimate goal is we need to install. no matter wat way we use. I said what i tried by myself. Thanks for your kind advice.

                                 

                                Regards,

                                Pradeep. V

                                • 13. Re: 11g installation Package error in prerequisite check stage
                                  Aryacool

                                  Hi,

                                   

                                    I have download the package and installed still showing dependencies

                                   

                                  [root@oracle11g app]# yum install elfutils-libelf-*

                                  Loaded plugins: rhnplugin, security

                                  This system is not registered with RHN.

                                  RHN support will be disabled.

                                  Setting up Install Process

                                  Parsing package install arguments

                                  Examining elfutils-libelf-devel-0.125-3.ML5.x86_64.rpm: elfutils-libelf-devel-0.125-3.ML5.x86_64

                                  Marking elfutils-libelf-devel-0.125-3.ML5.x86_64.rpm to be installed

                                  Examining elfutils-libelf-devel-0.125-3.SEL5.i386.rpm: elfutils-libelf-devel-0.125-3.SEL5.i386

                                  Marking elfutils-libelf-devel-0.125-3.SEL5.i386.rpm to be installed

                                  Examining elfutils-libelf-devel-static-0.125-3.ML5.x86_64.rpm: elfutils-libelf-devel-static-0.125-3.ML5.x86_64

                                  Marking elfutils-libelf-devel-static-0.125-3.ML5.x86_64.rpm to be installed

                                  Examining elfutils-libelf-devel-static-0.125-3.SEL5.i386.rpm: elfutils-libelf-devel-static-0.125-3.SEL5.i386

                                  Marking elfutils-libelf-devel-static-0.125-3.SEL5.i386.rpm to be installed

                                  Resolving Dependencies

                                  --> Running transaction check

                                  ---> Package elfutils-libelf-devel.x86_64 0:0.125-3.ML5 set to be updated

                                  --> Processing Dependency: elfutils-libelf = 0.125-3.ML5 for package: elfutils-libelf-devel

                                  ---> Package elfutils-libelf-devel.i386 0:0.125-3.SEL5 set to be updated

                                  --> Processing Dependency: elfutils-libelf = 0.125-3.SEL5 for package: elfutils-libelf-devel

                                  ---> Package elfutils-libelf-devel-static.i386 0:0.125-3.SEL5 set to be updated

                                  ---> Package elfutils-libelf-devel-static.x86_64 0:0.125-3.ML5 set to be updated

                                  --> Processing Conflict: elfutils-libelf-devel-static conflicts elfutils-libelf-devel > 0.125-3.ML5

                                  --> Processing Conflict: elfutils-libelf-devel-static conflicts elfutils-libelf-devel < 0.125-3.SEL5

                                  --> Finished Dependency Resolution

                                  elfutils-libelf-devel-0.125-3.ML5.x86_64 from elfutils-libelf-devel-0.125-3.ML5.x86_64.rpm has depsolving problems

                                    --> Missing Dependency: elfutils-libelf = 0.125-3.ML5 is needed by package elfutils-libelf-devel-0.125-3.ML5.x86_64 (elfutils-libelf-devel-0.125-3.ML5.x86_64.rpm)

                                  elfutils-libelf-devel-static-0.125-3.SEL5.i386 from elfutils-libelf-devel-static-0.125-3.SEL5.i386.rpm has depsolving problems

                                    --> elfutils-libelf-devel-static conflicts with elfutils-libelf-devel

                                  elfutils-libelf-devel-0.125-3.SEL5.i386 from elfutils-libelf-devel-0.125-3.SEL5.i386.rpm has depsolving problems

                                    --> Missing Dependency: elfutils-libelf = 0.125-3.SEL5 is needed by package elfutils-libelf-devel-0.125-3.SEL5.i386 (elfutils-libelf-devel-0.125-3.SEL5.i386.rpm)

                                  elfutils-libelf-devel-static-0.125-3.ML5.x86_64 from elfutils-libelf-devel-static-0.125-3.ML5.x86_64.rpm has depsolving problems

                                    --> elfutils-libelf-devel-static conflicts with elfutils-libelf-devel

                                  Error: Missing Dependency: elfutils-libelf = 0.125-3.SEL5 is needed by package elfutils-libelf-devel-0.125-3.SEL5.i386 (elfutils-libelf-devel-0.125-3.SEL5.i386.rpm)

                                  Error: Missing Dependency: elfutils-libelf = 0.125-3.ML5 is needed by package elfutils-libelf-devel-0.125-3.ML5.x86_64 (elfutils-libelf-devel-0.125-3.ML5.x86_64.rpm)

                                  Error: elfutils-libelf-devel-static conflicts with elfutils-libelf-devel

                                   

                                  ***************************************************************************************************************************************88

                                  [root@linu11g app]# rpm -ivh elfutils-libelf-*

                                  warning: elfutils-libelf-devel-0.125-3.ML5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 652e84dc

                                  error: Failed dependencies:

                                          elfutils-libelf = 0.125-3.ML5 is needed by elfutils-libelf-devel-0.125-3.ML5.x86_64

                                          elfutils-libelf = 0.125-3.SEL5 is needed by elfutils-libelf-devel-0.125-3.SEL5.i386

                                          elfutils-libelf-devel > 0.125-3.ML5 conflicts with elfutils-libelf-devel-static-0.125-3.ML5.x86_64

                                          elfutils-libelf-devel < 0.125-3.SEL5 conflicts with elfutils-libelf-devel-static-0.125-3.SEL5.i386

                                  Regards,

                                  Arya Mahapatra

                                  • 14. Re: 11g installation Package error in prerequisite check stage
                                    Dude!

                                    You have to uninstall elfutils-libelf-devel-static and install the two packages together. Don't use rpm to install packages unless you really know what you are doing!

                                     

                                    --> Processing Conflict: elfutils-libelf-devel-static conflicts elfutils-libelf-devel > 0.125-3.ML5

                                    --> Processing Conflict: elfutils-libelf-devel-static conflicts elfutils-libelf-devel < 0.125-3.SEL5

                                     

                                    Sorry, but what you are doing does not make much sense.. Where do these packages come from? It looks like you downloaded "some" RPM packages and installed them, probably not having a subscription, since RHEL is not a free product. Why don't you choose Oracle Linux instead, which is 100 % user space compatible with RHEL (same source), but free including patches? You might also want to use the latest OL 5.9 release.

                                    1 2 Previous Next