0 Replies Latest reply: Dec 3, 2013 9:49 AM by dateggio RSS

    INST-08010: Error in validating the port range for auto port allocation

    dateggio

      Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:

      INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.

      Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.

      INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).

      Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).

      INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).

      Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).

       

      My Operating System  below:

      Linux Red Hat 5.9 X86 64bit

       

      My uname -a are below:

      Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux

       

      My /etc/hosts file are  below:

      # Do not remove the following line, or various programs

      # that require network functionality will fail.

      127.0.0.1   localhost.localdomain localhost

      10.10.80.19 redhat59

       

      My /etc/sysconfig/network are below:

      NETWORKING=yes

      NETWORKING_IPV6=no

      HOSTNAME=redhat59

      GATEWAY=10.174.27.228

       

      My /etc/sysconfig/iptables are below:

      # Generated by iptables-save v1.3.5 on Tue Dec  3 17:01:17 2013

      *filter

      :INPUT ACCEPT [425:33860]

      :FORWARD ACCEPT [0:0]

      :OUTPUT ACCEPT [307:40164]

      COMMIT

      # Completed on Tue Dec  3 17:01:17 2013

       

      My ifconfig are below:

      eth0      Link encap:Ethernet  HWaddr 52:54:00:55:9B:C9

                inet addr:10.174.27.233  Bcast:10.174.27.255  Mask:255.255.255.0

                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

                RX packets:200216 errors:0 dropped:0 overruns:0 frame:0

                TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0

                collisions:0 txqueuelen:1000

                RX bytes:110668992 (105.5 MiB)  TX bytes:209784134 (200.0 MiB)

       

       

      lo        Link encap:Local Loopback

                inet addr:127.0.0.1  Mask:255.0.0.0

                UP LOOPBACK RUNNING  MTU:16436  Metric:1

                RX packets:109200 errors:0 dropped:0 overruns:0 frame:0

                TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0

                collisions:0 txqueuelen:0

                RX bytes:257845896 (245.9 MiB)  TX bytes:257845896 (245.9 MiB)

       

      my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:

      # Virtio Network Device

      DEVICE=eth0

      BOOTPROTO=static

      BROADCAST=10.174.27.255

      HWADDR=52:54:00:55:9B:C9

      IPADDR=10.174.27.233

      NETMASK=255.255.255.0

      NETWORK=10.174.27.0

      ONBOOT=yes

       

       

      Have any suggestion please?

      Many Thanks

      D