I tried several times, I always got this error:
root@solarisgfn:~# newfs /dev/rdsk/c10t0d0p0
newfs: construct a new file system /dev/rdsk/c10t0d0p0: (y/n)? y
mkfs: bad value for size: 0 must be between 1024 and 0
mkfs: size reset to default 0
mkfs: bad value for rps: 1056 must be between 1 and 1000
mkfs: rps reset to default 60
seek error on sector -1: Error 0
If setting ufs under PC-BSD and succesfully mounted there, I try in Solaris and get this error:
mount: /dev/rdsk/c9t0d0p0 not a block device
Can you display information about this device by using this command:
# rmformat -l
I rarely use USB sticks but it probably needs an fdisk partition to remove the FAT32 formatting.
Try this command (using the device path from the rmformat output):
# fdisk /dev/rdsk/c9t0d0p0
All you told me I did many times before. But I have been forwarded.
I did the following:
# fdisk /dev/rdsk/c10t0d0p0
-> Create Partition (Solaris2)
then I had to do this:
# newfs /dev/dsk/c10t0d0s2 ; I don't know why ...s2 at the end instead of p2 or p1. The defines all did not work except s2.
Solaris created a file system but it was corrupt and I had to fix it with
# fsck /dev/dsk/c10t0d0s2
I still dont know why had to fix the file system. I've made just one partition on the usb drive.
So it works now but that cannot be the correct way!
I wish Oracle will make a gui frontend for managing disks (as PC-BSD does), I ve spent much time for this small job.
GParted on Solaris does only work with NTFS (why??????)
Yes, your points are well taken and well understood by me personally, who has been wrestling with devices and file systems
for many years. Then, I fell in love with a new file system and no more wrestling!
I thought I've seen people use GParted with Solaris with NTFS or maybe I've seen people use it at a lower level.
I don't know why the file system on the stick was corrupt.
Solaris is a great OS, more than an OS, really an enterprise infrastructure, but some of the underlying device management is still kind of clunky.
I would recommend that you try using ZFS, which overcomes a lot of the underlying device management. In your case, if you had created an
fdisk partition, then you would only need 2 more steps. No fussing with slices or partitions or difficult newfs syntax.
# zpool create pool-name c10t0d0
# zfs create pool-name/file-system-name
On a SPARC system, that doesn't use fdisk partitions, you would just plug in a disk and use the 2 commands above.
Please see the ZFS Admin Guide for a full description:
I am making a linux certification but don´t like the linux distributions (except Red Hat) but I am really crazy about Solaris. Since I know Solaris 9 there isnt any other OS which I would prefer most. In my school I am using Solaris 11 instead of a Linux and at home I have also Solaris 11. Now I want to install on a girlfriends laptop and it´s important to manage file systems on USB Sticks and Harddrives.
I will try with ZFS, thanks for the commands