1 person found this helpful
Here are something you can try on the skillbuilders modal page.
#myreport is parant page's report region.
I am not saying skillbuilders modal page plug in is not good.. however i write own basic modal page with far less codes needed and full control, check out window.showModalDialog (parent page) and window.returnValue (modal page).
Thanks very much for helping me.
I'm not sure I understand your suggestions.
Thank you, again. It's much appreciated.
1 person found this helpful
Your requirement isn't that hard and the modal lov plugin provides ways to accomodate it.
What it boils down to is: "when the modal page is closed I want to act on it".
1/ Closing the modal dialog: you can do this several ways. The first is by defining an auto-close selector in the dynamic action which initializes the modal dialog (thus your parent page). The auto-close selector will look for the existence of the specified element(s) selector on page load of the iframe. By default a success message selector is filled out, but this may or may not work depending on your theme and page template.
If you are showing a success message on your modal page after the page has been submitted, then you can provide the matching selector in the dialog setup DA. This is by far the easiest and most transparent way to integrate the closing, but it requires you at least know how to inspect your page template or html in order to determine the correct success message selector. Or maybe your page has no success message template, who knows. Maybe you're not setting a success message. This is setup.
Literal copy from the documentation:
Auto-close On Element Selector
The Auto-close On Element Selector setting is used to specify a jQuery selector used to close the modal page automatically. The selector is executed when the modal page is loaded. If the selector selects anything, the modal page will close and the Auto Close event will be triggered. Typically this is only used for modal pages that are submitted for processing. The success message is used to auto-close the modal page.
Another way is to manually close the page by calling the close function on the modal dialog instance on the parent page from within the iframe. You can find this in the documentation aswell, and Danny also posted it:
2/ Act on the closing of the modal dialog: On your parent page you can create a dynamic action which acts on one of several types of closing the modal page.
The close method can be used to close the modal dialog programmatically. The method accepts an optional parameter which can be anything. That value can then be accessed in Dynamic Actions that respond to any of the close events of the plug-in. The syntax to access the value is: this.data.modalPageCloseValue. To access the method from within the child page, see the third example.
$(document).apex_modal_page('close'); $(document).apex_modal_page('close', someVariable); parent.$(parent.document).apex_modal_page('close');
These close events are also described in the documentation:
The Auto Close event fires when the modal dialog is closed after the page has been submitted and the Auto Close element is found in the next page that loads. When the Auto Close event fires it exposes the Auto Close element to in Dynamic Actions as this.data.$modalPageCloseObject. The $modalPageCloseObject is a jQuery object which allows a great deal of flexibility. For example, the success message captured from the modal dialog could be displayed on the parent page with the following code (or something similar):
Another option would be to pass a JSON string as the success message so that it could be used more programmatically by the parent page. The following example shows how this could be done. Of course it would need to be adjusted depending on your success message template (found in the page template) and the embedded JSON string.
var successMessage = this.data.$modalPageCloseObject;
var custObjText = successMessage.find('div.uMessageText').text();
var custObj = $.parseJSON(custObjText);
The Manual Close event fires when the the modal dialog is closed by either the end user or programmatically by the close method. If the close method was used it’s possible that an optional value was passed to the close method which is exposed in Dynamic Actions as this.data.modalPageCloseValue.
The Close event fires whenever the modal dialog is closed, whether automatically or manually.
What this means is that you could set up a dynamic action which fires on close of the modal dialog, and which reloads or submits the page.
Thank you so much for your great detailed explanation. I did not mark this as "Correct" yet because I've not had opportunity to try out these suggestions, though I suspect one of these will, in fact, solve my issue.
My Skillbuilders Modal page is closing automatically when a success message is issued from a PLSQL process in the displayed modal page (page 6 in my example). In this PLSQL process I use:
apex_application.g_print_success_message := null;
This line auto closes the modal dialogue and then my "parent" page (page 7) is no longer darkened and is now available to users for editing.
And, of course, it is this "parent" page that I need to have re-submitted so that data changes made to the apex collection in the modal page are presented in the "parent".
So then, are you saying that I could create a dynamic action in my "parent" page that is triggered by the Auto Close event thrown by the Modal page when it automatically closes?
I did create such a dynamic action ...
In my "parent" page (page 7), I created a DA:
Event: Auto Close [SkillBuilders Modal Page (2.0.0)]
Selection Type: Button
Condition: No Condition
In the "Actions" Section:
Action: Submit Page
Fire When Event Result Is: True
Fire On Page Load: Not Checked
Show Processing: No
Un-fortunately, this DA does not work. My modal page closes automatically alright. But the "parent" page does not re-submit.
What am I missing?
No doubt I'm not totally understanding what I need to do.
Your auto-close dynamic action hasn't been defined properly. The action is not fired on a specific element but rather on the "document". Your selection type should be "DOM element" and the element should be "document".
(Note that if you use multiple modal pages on one page, this action will fire for each of them. You can use the "modal page id" in the modal page creation DAs to be able to distinguish between them in the close actions. You can find this in the documentation, too.)
Thank you very much for correcting me here.
It turns out that, while waiting for more responses in this Forum, I researched on the web and found this really excellent article written by Christoph Ruepprich in which he takes people step-by-step in setting up the SkillBuilders Modal page (version 2.0): from opening it to closing it to refreshing the parent page (which is, of course, what I specifically need). How to make use of the close events exposed by the plugin. In addition, he shows how to do all this both from a standalone button as well as from clicking a link in a classical report. The article includes several screenshots that makes it so easy to follow and learn from. Very nice indeed.
What he says in the article is quite similar to what you have said in your responses.
Here's the link. Hopefully it will help others as well as myself.
Thanks, again for your help.