10 Replies Latest reply: Mar 6, 2014 10:46 PM by Ravinder Rathi-Oracle RSS

    the following nodes cannot be clustered due to user equivalence issue: localhost

    user4904817

      Hi,

      I am installing RAC grid software on rhel 6 and got this error.

      i have set up oracle user with same primary group and same secondary groups on both nodes

      i have also set up password less ssh between users on nodes and it works fine

      any clues?

        • 1. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
          Ravinder Rathi-Oracle

          What is the output of :

           

          Cluvfy stage -pre crsinst -n <node1,node2> -verbose

           

           

          Does it report any error?

          • 2. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
            Ravinder Rathi-Oracle

            Also suggest you to reconfigure the SSH using below doc:

             

            How To Configure SSH for a RAC Installation (Doc ID 300548.1)

             

             

            and refer below doc for known issues:

             

             

            PRVF-4007 : User equivalence check failed (Doc ID 1323714.1)

            • 3. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
              user4904817

              [oracle@RAC1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose

               

               

              Performing pre-checks for cluster services setup

               

               

              Checking node reachability...

               

               

              Check: Node reachability from node "RAC1"

                Destination Node                      Reachable?

                ------------------------------------  ------------------------

                rac2                                  yes

                rac1                                  yes

              Result: Node reachability check passed from node "RAC1"

               

               

               

               

              Checking user equivalence...

               

               

              Check: User equivalence for user "oracle"

                Node Name                             Comment

                ------------------------------------  ------------------------

                rac2                                  passed

                rac1                                  passed

              Result: User equivalence check passed for user "oracle"

               

               

              Checking node connectivity...

               

               

              Checking hosts config file...

                Node Name     Status                    Comment

                ------------  ------------------------  ------------------------

                rac2          passed

                rac1          passed

               

               

              Verification of the hosts config file successful

               

               

               

               

              Interface information for node "rac2"

              Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU

              ------ --------------- --------------- --------------- --------------- ----------------- ------

              eth4   192.168.1.201   192.168.1.0     0.0.0.0         192.168.1.1     00:50:56:B3:2F:F2 1500

              eth3   192.168.2.2     192.168.2.0     0.0.0.0         192.168.1.1     00:50:56:B3:12:65 1500

               

               

               

               

              Interface information for node "rac1"

              Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU

              ------ --------------- --------------- --------------- --------------- ----------------- ------

              eth1   192.168.1.200   192.168.1.0     0.0.0.0         192.168.1.1     00:50:56:B3:4F:89 1500

              eth2   192.168.2.1     192.168.2.0     0.0.0.0         192.168.1.1     00:50:56:B3:38:74 1500

               

               

               

               

              Check: Node connectivity of subnet "192.168.1.0"

                Source                          Destination                     Connected?

                ------------------------------  ------------------------------  ----------------

                rac2:eth4                       rac1:eth1                       yes

              Result: Node connectivity passed for subnet "192.168.1.0" with node(s) rac2,rac1

               

               

               

               

              Check: TCP connectivity of subnet "192.168.1.0"

                Source                          Destination                     Connected?

                ------------------------------  ------------------------------  ----------------

                RAC1:127.0.0.1                  rac2:192.168.1.201              failed

                RAC1:127.0.0.1                  rac1:192.168.1.200              passed

              Result: TCP connectivity check failed for subnet "192.168.1.0"

               

               

               

               

              Check: Node connectivity of subnet "192.168.2.0"

                Source                          Destination                     Connected?

                ------------------------------  ------------------------------  ----------------

                rac2:eth3                       rac1:eth2                       yes

              Result: Node connectivity passed for subnet "192.168.2.0" with node(s) rac2,rac1

               

               

               

               

              Check: TCP connectivity of subnet "192.168.2.0"

                Source                          Destination                     Connected?

                ------------------------------  ------------------------------  ----------------

                RAC1:127.0.0.1                  rac2:192.168.2.2                failed

                RAC1:127.0.0.1                  rac1:192.168.2.1                passed

              Result: TCP connectivity check failed for subnet "192.168.2.0"

               

               

               

               

              Interfaces found on subnet "192.168.2.0" that are likely candidates for a private interconnect are:

              rac2 eth3:192.168.2.2

              rac1 eth2:192.168.2.1

               

               

              WARNING:

              Could not find a suitable set of interfaces for VIPs

               

               

              WARNING:

              Could not find a suitable set of interfaces with the same name for the private interconnect

               

               

              Result: Node connectivity check passed

               

               

               

               

              Check: Total memory

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          3.74GB (3925056.0KB)      1.5GB (1572864.0KB)       passed

                rac1          3.74GB (3925056.0KB)      1.5GB (1572864.0KB)       passed

              Result: Total memory check passed

               

               

              Check: Available memory

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          3.57GB (3747356.0KB)      50MB (51200.0KB)          passed

                rac1          3.47GB (3643380.0KB)      50MB (51200.0KB)          passed

              Result: Available memory check passed

               

               

              Check: Swap space

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          3.94GB (4128760.0KB)      3.74GB (3925056.0KB)      passed

                rac1          3.94GB (4128760.0KB)      3.74GB (3925056.0KB)      passed

              Result: Swap space check passed

               

               

              Check: Free disk space for "rac2:/tmp"

                Path              Node Name     Mount point   Available     Required      Comment

                ----------------  ------------  ------------  ------------  ------------  ------------

                /tmp              rac2          /             4.69GB        1GB           passed

              Result: Free disk space check passed for "rac2:/tmp"

               

               

              Check: Free disk space for "rac1:/tmp"

                Path              Node Name     Mount point   Available     Required      Comment

                ----------------  ------------  ------------  ------------  ------------  ------------

                /tmp              rac1          /             3.09GB        1GB           passed

              Result: Free disk space check passed for "rac1:/tmp"

               

               

              Check: User existence for "oracle"

                Node Name     Status                    Comment

                ------------  ------------------------  ------------------------

                rac2          exists                    passed

                rac1          exists                    passed

              Result: User existence check passed for "oracle"

               

               

              Check: Group existence for "oinstall"

                Node Name     Status                    Comment

                ------------  ------------------------  ------------------------

                rac2          exists                    passed

                rac1          exists                    passed

              Result: Group existence check passed for "oinstall"

               

               

              Check: Group existence for "dba"

                Node Name     Status                    Comment

                ------------  ------------------------  ------------------------

                rac2          exists                    passed

                rac1          exists                    passed

              Result: Group existence check passed for "dba"

               

               

              Check: Membership of user "oracle" in group "oinstall" [as Primary]

                Node Name         User Exists   Group Exists  User in Group  Primary       Comment

                ----------------  ------------  ------------  ------------  ------------  ------------

                rac2              yes           yes           yes           yes           passed

                rac1              yes           yes           yes           yes           passed

              Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed

               

               

              Check: Membership of user "oracle" in group "dba"

                Node Name         User Exists   Group Exists  User in Group  Comment

                ----------------  ------------  ------------  ------------  ----------------

                rac2              yes           yes           yes           passed

                rac1              yes           yes           yes           passed

              Result: Membership check for user "oracle" in group "dba" passed

               

               

              Check: Run level

                Node Name     run level                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          3                         3,5                       passed

                rac1          3                         3,5                       passed

              Result: Run level check passed

               

               

              Check: Hard limits for "maximum open file descriptors"

                Node Name         Type          Available     Required      Comment

                ----------------  ------------  ------------  ------------  ----------------

                rac2              hard          65536         65536         passed

                rac1              hard          65536         65536         passed

              Result: Hard limits check passed for "maximum open file descriptors"

               

               

              Check: Soft limits for "maximum open file descriptors"

                Node Name         Type          Available     Required      Comment

                ----------------  ------------  ------------  ------------  ----------------

                rac2              soft          1024          1024          passed

                rac1              soft          1024          1024          passed

              Result: Soft limits check passed for "maximum open file descriptors"

               

               

              Check: Hard limits for "maximum user processes"

                Node Name         Type          Available     Required      Comment

                ----------------  ------------  ------------  ------------  ----------------

                rac2              hard          16384         16384         passed

                rac1              hard          16384         16384         passed

              Result: Hard limits check passed for "maximum user processes"

               

               

              Check: Soft limits for "maximum user processes"

                Node Name         Type          Available     Required      Comment

                ----------------  ------------  ------------  ------------  ----------------

                rac2              soft          16384         2047          passed

                rac1              soft          16384         2047          passed

              Result: Soft limits check passed for "maximum user processes"

               

               

              Check: System architecture

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          x86_64                    x86_64                    passed

                rac1          x86_64                    x86_64                    passed

              Result: System architecture check passed

               

               

              Check: Kernel version

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          2.6.32-358.el6.x86_64     2.6.9                     passed

                rac1          2.6.32-358.el6.x86_64     2.6.9                     passed

              Result: Kernel version check passed

               

               

              Check: Kernel parameter for "semmsl"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          250                       250                       passed

                rac1          250                       250                       passed

              Result: Kernel parameter check passed for "semmsl"

               

               

              Check: Kernel parameter for "semmns"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          32000                     32000                     passed

                rac1          32000                     32000                     passed

              Result: Kernel parameter check passed for "semmns"

               

               

              Check: Kernel parameter for "semopm"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          100                       100                       passed

                rac1          100                       100                       passed

              Result: Kernel parameter check passed for "semopm"

               

               

              Check: Kernel parameter for "semmni"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          128                       128                       passed

                rac1          128                       128                       passed

              Result: Kernel parameter check passed for "semmni"

               

               

              Check: Kernel parameter for "shmmax"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          4398046511104             536870912                 passed

                rac1          4398046511104             536870912                 passed

              Result: Kernel parameter check passed for "shmmax"

               

               

              Check: Kernel parameter for "shmmni"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          4096                      4096                      passed

                rac1          4096                      4096                      passed

              Result: Kernel parameter check passed for "shmmni"

               

               

              Check: Kernel parameter for "shmall"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          4294967296                2097152                   passed

                rac1          4294967296                2097152                   passed

              Result: Kernel parameter check passed for "shmall"

               

               

              Check: Kernel parameter for "file-max"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          6815744                   6815744                   passed

                rac1          6815744                   6815744                   passed

              Result: Kernel parameter check passed for "file-max"

               

               

              Check: Kernel parameter for "ip_local_port_range"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          between 9000 & 65500      between 9000 & 65500      passed

                rac1          between 9000 & 65500      between 9000 & 65500      passed

              Result: Kernel parameter check passed for "ip_local_port_range"

               

               

              Check: Kernel parameter for "rmem_default"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          262144                    262144                    passed

                rac1          262144                    262144                    passed

              Result: Kernel parameter check passed for "rmem_default"

               

               

              Check: Kernel parameter for "rmem_max"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          4194304                   4194304                   passed

                rac1          4194304                   4194304                   passed

              Result: Kernel parameter check passed for "rmem_max"

               

               

              Check: Kernel parameter for "wmem_default"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          262144                    262144                    passed

                rac1          262144                    262144                    passed

              Result: Kernel parameter check passed for "wmem_default"

               

               

              Check: Kernel parameter for "wmem_max"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          1048576                   1048576                   passed

                rac1          1048576                   1048576                   passed

              Result: Kernel parameter check passed for "wmem_max"

               

               

              Check: Kernel parameter for "aio-max-nr"

                Node Name     Configured                Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          1048576                   1048576                   passed

                rac1          1048576                   1048576                   passed

              Result: Kernel parameter check passed for "aio-max-nr"

               

               

              Check: Package existence for "make-3.80"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          make-3.81-20.el6          make-3.80                 passed

                rac1          make-3.81-20.el6          make-3.80                 passed

              Result: Package existence check passed for "make-3.80"

               

               

              Check: Package existence for "binutils-2.15.92.0.2"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          binutils-2.20.51.0.2-5.36.el6  binutils-2.15.92.0.2      passed

                rac1          binutils-2.20.51.0.2-5.36.el6  binutils-2.15.92.0.2      passed

              Result: Package existence check passed for "binutils-2.15.92.0.2"

               

               

              Check: Package existence for "gcc-3.4.6"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          gcc-4.4.7-4.el6           gcc-3.4.6                 passed

                rac1          gcc-4.4.7-4.el6           gcc-3.4.6                 passed

              Result: Package existence check passed for "gcc-3.4.6"

               

               

              Check: Package existence for "libaio-0.3.105 (i386)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   libaio-0.3.105 (i386)     failed

                rac1          missing                   libaio-0.3.105 (i386)     failed

              Result: Package existence check failed for "libaio-0.3.105 (i386)"

               

               

              Check: Package existence for "libaio-0.3.105 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          libaio-0.3.107-10.el6 (x86_64)  libaio-0.3.105 (x86_64)   passed

                rac1          libaio-0.3.107-10.el6 (x86_64)  libaio-0.3.105 (x86_64)   passed

              Result: Package existence check passed for "libaio-0.3.105 (x86_64)"

               

               

              Check: Package existence for "glibc-2.3.4-2.41 (i686)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   glibc-2.3.4-2.41 (i686)   failed

                rac1          missing                   glibc-2.3.4-2.41 (i686)   failed

              Result: Package existence check failed for "glibc-2.3.4-2.41 (i686)"

               

               

              Check: Package existence for "glibc-2.3.4-2.41 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          glibc-2.12-1.132.el6 (x86_64)  glibc-2.3.4-2.41 (x86_64)  passed

                rac1          glibc-2.12-1.132.el6 (x86_64)  glibc-2.3.4-2.41 (x86_64)  passed

              Result: Package existence check passed for "glibc-2.3.4-2.41 (x86_64)"

               

               

              Check: Package existence for "compat-libstdc++-33-3.2.3 (i386)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   compat-libstdc++-33-3.2.3 (i386)  failed

                rac1          missing                   compat-libstdc++-33-3.2.3 (i386)  failed

              Result: Package existence check failed for "compat-libstdc++-33-3.2.3 (i386)"

               

               

              Check: Package existence for "compat-libstdc++-33-3.2.3 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          compat-libstdc++-33-3.2.3-69.el6 (x86_64)  compat-libstdc++-33-3.2.3 (x86_64)  passed

                rac1          compat-libstdc++-33-3.2.3-69.el6 (x86_64)  compat-libstdc++-33-3.2.3 (x86_64)  passed

              Result: Package existence check passed for "compat-libstdc++-33-3.2.3 (x86_64)"

               

               

              Check: Package existence for "elfutils-libelf-0.97 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          elfutils-libelf-0.152-1.el6 (x86_64)  elfutils-libelf-0.97 (x86_64)  passed

                rac1          elfutils-libelf-0.152-1.el6 (x86_64)  elfutils-libelf-0.97 (x86_64)  passed

              Result: Package existence check passed for "elfutils-libelf-0.97 (x86_64)"

               

               

              Check: Package existence for "elfutils-libelf-devel-0.97"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   elfutils-libelf-devel-0.97  failed

                rac1          missing                   elfutils-libelf-devel-0.97  failed

              Result: Package existence check failed for "elfutils-libelf-devel-0.97"

               

               

              Check: Package existence for "glibc-common-2.3.4"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          glibc-common-2.12-1.132.el6  glibc-common-2.3.4        passed

                rac1          glibc-common-2.12-1.132.el6  glibc-common-2.3.4        passed

              Result: Package existence check passed for "glibc-common-2.3.4"

               

               

              Check: Package existence for "glibc-devel-2.3.4 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          glibc-devel-2.12-1.132.el6 (x86_64)  glibc-devel-2.3.4 (x86_64)  passed

                rac1          glibc-devel-2.12-1.132.el6 (x86_64)  glibc-devel-2.3.4 (x86_64)  passed

              Result: Package existence check passed for "glibc-devel-2.3.4 (x86_64)"

               

               

              Check: Package existence for "glibc-headers-2.3.4"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          glibc-headers-2.12-1.132.el6  glibc-headers-2.3.4       passed

                rac1          glibc-headers-2.12-1.132.el6  glibc-headers-2.3.4       passed

              Result: Package existence check passed for "glibc-headers-2.3.4"

               

               

              Check: Package existence for "gcc-c++-3.4.6"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          gcc-c++-4.4.7-4.el6       gcc-c++-3.4.6             passed

                rac1          gcc-c++-4.4.7-4.el6       gcc-c++-3.4.6             passed

              Result: Package existence check passed for "gcc-c++-3.4.6"

               

               

              Check: Package existence for "libaio-devel-0.3.105 (i386)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   libaio-devel-0.3.105 (i386)  failed

                rac1          missing                   libaio-devel-0.3.105 (i386)  failed

              Result: Package existence check failed for "libaio-devel-0.3.105 (i386)"

               

               

              Check: Package existence for "libaio-devel-0.3.105 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          libaio-devel-0.3.107-10.el6 (x86_64)  libaio-devel-0.3.105 (x86_64)  passed

                rac1          libaio-devel-0.3.107-10.el6 (x86_64)  libaio-devel-0.3.105 (x86_64)  passed

              Result: Package existence check passed for "libaio-devel-0.3.105 (x86_64)"

               

               

              Check: Package existence for "libgcc-3.4.6 (i386)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   libgcc-3.4.6 (i386)       failed

                rac1          missing                   libgcc-3.4.6 (i386)       failed

              Result: Package existence check failed for "libgcc-3.4.6 (i386)"

               

               

              Check: Package existence for "libgcc-3.4.6 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          libgcc-4.4.7-4.el6 (x86_64)  libgcc-3.4.6 (x86_64)     passed

                rac1          libgcc-4.4.7-4.el6 (x86_64)  libgcc-3.4.6 (x86_64)     passed

              Result: Package existence check passed for "libgcc-3.4.6 (x86_64)"

               

               

              Check: Package existence for "libstdc++-3.4.6 (i386)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   libstdc++-3.4.6 (i386)    failed

                rac1          missing                   libstdc++-3.4.6 (i386)    failed

              Result: Package existence check failed for "libstdc++-3.4.6 (i386)"

               

               

              Check: Package existence for "libstdc++-3.4.6 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          libstdc++-4.4.7-4.el6 (x86_64)  libstdc++-3.4.6 (x86_64)  passed

                rac1          libstdc++-4.4.7-4.el6 (x86_64)  libstdc++-3.4.6 (x86_64)  passed

              Result: Package existence check passed for "libstdc++-3.4.6 (x86_64)"

               

               

              Check: Package existence for "libstdc++-devel-3.4.6 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          libstdc++-devel-4.4.7-4.el6 (x86_64)  libstdc++-devel-3.4.6 (x86_64)  passed

                rac1          libstdc++-devel-4.4.7-4.el6 (x86_64)  libstdc++-devel-3.4.6 (x86_64)  passed

              Result: Package existence check passed for "libstdc++-devel-3.4.6 (x86_64)"

               

               

              Check: Package existence for "sysstat-5.0.5"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          sysstat-9.0.4-22.el6      sysstat-5.0.5             passed

                rac1          sysstat-9.0.4-22.el6      sysstat-5.0.5             passed

              Result: Package existence check passed for "sysstat-5.0.5"

               

               

              Check: Package existence for "unixODBC-2.2.11 (i386)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   unixODBC-2.2.11 (i386)    failed

                rac1          missing                   unixODBC-2.2.11 (i386)    failed

              Result: Package existence check failed for "unixODBC-2.2.11 (i386)"

               

               

              Check: Package existence for "unixODBC-2.2.11 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          unixODBC-2.2.14-12.el6_3 (x86_64)  unixODBC-2.2.11 (x86_64)  passed

                rac1          unixODBC-2.2.14-12.el6_3 (x86_64)  unixODBC-2.2.11 (x86_64)  passed

              Result: Package existence check passed for "unixODBC-2.2.11 (x86_64)"

               

               

              Check: Package existence for "unixODBC-devel-2.2.11 (i386)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   unixODBC-devel-2.2.11 (i386)  failed

                rac1          missing                   unixODBC-devel-2.2.11 (i386)  failed

              Result: Package existence check failed for "unixODBC-devel-2.2.11 (i386)"

               

               

              Check: Package existence for "unixODBC-devel-2.2.11 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   unixODBC-devel-2.2.11 (x86_64)  failed

                rac1          missing                   unixODBC-devel-2.2.11 (x86_64)  failed

              Result: Package existence check failed for "unixODBC-devel-2.2.11 (x86_64)"

               

               

              Check: Package existence for "pdksh-5.2.14"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          missing                   pdksh-5.2.14              failed

                rac1          missing                   pdksh-5.2.14              failed

              Result: Package existence check failed for "pdksh-5.2.14"

               

               

              Check: Package existence for "expat-1.95.7 (x86_64)"

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          expat-2.0.1-11.el6_2 (x86_64)  expat-1.95.7 (x86_64)     passed

                rac1          expat-2.0.1-11.el6_2 (x86_64)  expat-1.95.7 (x86_64)     passed

              Result: Package existence check passed for "expat-1.95.7 (x86_64)"

               

               

              Checking for multiple users with UID value 0

              Result: Check for multiple users with UID value 0 passed

               

               

              Check: Current group ID

              Result: Current group ID check passed

              Checking Core file name pattern consistency...

              Core file name pattern consistency check passed.

               

               

              Checking to make sure user "oracle" is not in "root" group

                Node Name     Status                    Comment

                ------------  ------------------------  ------------------------

                rac2          does not exist            passed

                rac1          does not exist            passed

              Result: User "oracle" is not part of "root" group. Check passed

               

               

              Check default user file creation mask

                Node Name     Available                 Required                  Comment

                ------------  ------------------------  ------------------------  ----------

                rac2          0022                      0022                      passed

                rac1          0022                      0022                      passed

              Result: Default user file creation mask check passed

               

               

              Starting Clock synchronization checks using Network Time Protocol(NTP)...

               

               

              NTP Configuration file check started...

              The NTP configuration file "/etc/ntp.conf" is available on all nodes

              NTP Configuration file check passed

               

               

              Checking daemon liveness...

               

               

              Check: Liveness for "ntpd"

                Node Name                             Running?

                ------------------------------------  ------------------------

                rac2                                  no

                rac1                                  no

              Result: Liveness check failed for "ntpd"

              PRVF-5415 : Check to see if NTP daemon is running failed

              Result: Clock synchronization check using Network Time Protocol(NTP) failed

               

               

               

               

              Pre-check for cluster services setup was unsuccessful on all the nodes.

              • 4. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
                J.A.

                Hi

                There is a problem with NTP:

                 

                PRVF-5415 : Check to see if NTP daemon is running failed

                Result: Clock synchronization check using Network Time Protocol(NTP) failed


                If you want to use NTP with Grid installation, Either configure NTP, or make sure it is not configured so the Oracle Cluster Time Synchronization Service (ctssd) can synchronize the times of the RAC nodes:


                Option 1 --> Use CTSSD:

                # service ntpd stop

                Shutting down ntpd:                                        [  OK  ]

                # chkconfig ntpd off

                # mv /etc/ntp.conf /etc/ntp.conf.orig

                # rm /var/run/ntpd.pid


                Option 2 --> If you want to use NTP, you must add the "-x" :

                /etc/sysconfig/ntpd

                OPTIONS="-x -u ntp:ntp -p /var/run/ntpd.pid"


                I´ve tested both and works fine on Grid installations


                Regard


                • 5. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
                  Ravinder Rathi-Oracle

                  Please install all the missing packages and then go for installation:

                   

                  Suggest you to please refer the section "RAC on Linux Step by Step Installation Instructions " in below doc. This has step by step installation commands for Oracle RAC.

                   

                  RAC and Oracle Clusterware Best Practices and Starter Kit (Linux) (Doc ID 811306.1)

                  • 6. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
                    user4904817

                    I have all packages installed

                    see below

                     

                    [oracle@RAC1 ~]$ grep -i missing runcluvfy.out2|awk '{print $3}'

                    libaio-0.3.105

                    libaio-0.3.105

                    glibc-2.3.4-2.41

                    glibc-2.3.4-2.41

                    compat-libstdc++-33-3.2.3

                    compat-libstdc++-33-3.2.3

                    libaio-devel-0.3.105

                    libaio-devel-0.3.105

                    libgcc-3.4.6

                    libgcc-3.4.6

                    libstdc++-3.4.6

                    libstdc++-3.4.6

                    unixODBC-2.2.11

                    unixODBC-2.2.11

                    unixODBC-devel-2.2.11

                    unixODBC-devel-2.2.11

                    pdksh-5.2.14

                    pdksh-5.2.14


                    [oracle@RAC1 ~]$ rpm -qa | grep -i libaio

                    libaio-0.3.107-10.el6.x86_64

                    libaio-devel-0.3.107-10.el6.x86_64

                    [oracle@RAC1 ~]$ rpm -qa | grep -i glibc

                    glibc-headers-2.12-1.132.el6.x86_64

                    glibc-2.12-1.132.el6.x86_64

                    glibc-devel-2.12-1.132.el6.x86_64

                    glibc-common-2.12-1.132.el6.x86_64

                    [oracle@RAC1 ~]$ rpm -qa | grep -i compat-libstdc

                    compat-libstdc++-33-3.2.3-69.el6.x86_64

                    [oracle@RAC1 ~]$ rpm -qa | grep -i libaio-devel

                    libaio-devel-0.3.107-10.el6.x86_64

                    [oracle@RAC1 ~]$ rpm -qa | grep -i libgcc

                    libgcc-4.4.7-4.el6.x86_64

                    [oracle@RAC1 ~]$ rpm -qa | grep -i libstdc

                    libstdc++-4.4.7-4.el6.x86_64

                    compat-libstdc++-33-3.2.3-69.el6.x86_64

                    libstdc++-devel-4.4.7-4.el6.x86_64

                    [oracle@RAC1 ~]$ rpm -qa | grep -i unixODBC

                    unixODBC-devel-2.2.14-12.el6_3.x86_64

                    unixODBC-2.2.14-12.el6_3.x86_64

                    [oracle@RAC1 ~]$ rpm -qa | grep -i pdksh ( pdksh does not exist in RHEL6 because it is deprecated)

                    • 7. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
                      user4904817

                      I can not access these documents because i do not have subscription. is there a way to get them from open domain?

                      • 8. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
                        J.A.
                        • You have some packages missing, for example I see that you have installed 

                        unixODBC-devel-2.2.14-12.el6_3.x86_64


                        and runcluvfy is reporting:

                        unixODBC-devel-2.2.11 (i386)

                        unixODBC-devel-2.2.11 (x86_64)


                        Maybe you have a new version of the package, anyway as double check go to the linux media ans install the packages:

                        cd /media/cdrom/Server/Packages

                        rpm -Uvh unixODBC*


                        NOTE: You need to install the 32 and 64 bits package.


                        • Are you going to use NTP or CTSSD ?


                        • Also you have problem with the network configuration:


                        Result: TCP connectivity check failed for subnet "192.168.1.0"

                        Result: TCP connectivity check failed for subnet "192.168.2.0"


                        Check you network configuration: NICs, IPs, DNS



                        Regards

                         





                        • 9. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
                          user4904817

                          Thank you. do i need to install older versions of packages if i have newer versions?

                          Also, what is this following TCP connectivity check from localhost to public IP? it is showing as failed but how do i fix it ?

                           

                          Check: TCP connectivity of subnet "192.168.1.0"

                            Source                          Destination                     Connected?

                            ------------------------------  ------------------------------  ----------------

                            RAC1:127.0.0.1                  rac2:192.168.1.201              failed

                            RAC1:127.0.0.1                  rac1:192.168.1.200              passed

                          Result: TCP connectivity check failed for subnet "192.168.1.0"

                           

                           

                          Check: TCP connectivity of subnet "192.168.2.0"

                            Source                          Destination                     Connected?

                            ------------------------------  ------------------------------  ----------------

                            RAC1:127.0.0.1                  rac2:192.168.2.2                failed

                            RAC1:127.0.0.1                  rac1:192.168.2.1                passed

                          Result: TCP connectivity check failed for subnet "192.168.2.0"

                          • 10. Re: the following nodes cannot be clustered due to user equivalence issue: localhost
                            Ravinder Rathi-Oracle

                            Please check on this:

                             

                            - Ensure that there is NO firewall exist on these server.

                              PRVF-7617 Cluster Verify Fails For Private Network if Firewall Exists (Doc ID 1357657.1)

                             

                            - Check for know issue listed in below doc:

                               PRVF-7617: TCP connectivity check failed for subnet (Doc ID 1335136.1)