luxadm show port at state Connected when found on this link at least one target.
You have 2 FC port.
/dev/cfg/c2 - ofline
/dev/cfg/c3 - online 8 Gb/s
Check zonning on FC-switch.
I checked zoning and looks good to me.
How many FC-switches ( SAN) you have ?
Port c2 - have state offline. But you configure it at zones. Is this port connected to switch ?
You configure zone db_nightly_new_corp_flash4. Is this zone part of active configuration ?
alishow on switch will show what configuration is effective and what zones included at this config.
Show on server side result of command : cfgadm -al -o show_FCP_dev
Thanks for all your support Nik. It's the issue with Zoning. I am also setting up a new storage so facing these issues. Now I am on track.