14 Replies Latest reply: Oct 4, 2009 6:16 PM by 661723 RSS

    ntfs mount on oel 5.2

    661723
      sir
       uname -r
      2.6.18-92.el5
      how can i mount ntfs?i cant afford a kernel module update by ULN.

      help me...
        • 1. Re: ntfs mount on oel 5.2
          Tommyreynolds-Oracle
          Having a ULN subscription would not help you because Oracle does not ship the NTFS driver.

          Have a look at downloading one from http://www.ntfs-3g.org/ because you should have enough software from your OEL distribution media to compile it.
          • 2. Re: ntfs mount on oel 5.2
            721050
            i have the same problem.
            can you say the particular version of ntfs-3g and fuse kernel module (with link) for el5 -92?
            • 3. Re: ntfs mount on oel 5.2
              Tommyreynolds-Oracle
              You could probably get this from Dag Wiers' site; he keeps a YUM repository of stuff that doesn't get put into some distributions.

              http://dag.wieers.com/rpm/packages/fuse-ntfs-3g/

              Hint: look for his RPM repository setup.
              • 4. Re: ntfs mount on oel 5.2
                721050
                rpm -ivh fuse-ntfs-3g-1.913-1.el5.rf.x86_64.rpm
                warning: fuse-ntfs-3g-1.913-1.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
                error: Failed dependencies:
                        fuse >= 2.6.3 is needed by fuse-ntfs-3g-1.913-1.el5.rf.x86_64
                        libfuse.so.2()(64bit) is needed by fuse-ntfs-3g-1.913-1.el5.rf.x86_64
                        libfuse.so.2(FUSE_2.2)(64bit) is needed by fuse-ntfs-3g-1.913-1.el5.rf.x86_64
                        libfuse.so.2(FUSE_2.5)(64bit) is needed by fuse-ntfs-3g-1.913-1.el5.rf.x86_64
                        libfuse.so.2(FUSE_2.6)(64bit) is needed by fuse-ntfs-3g-1.913-1.el5.rf.x86_64
                i have already installed fuse 2.8.0 from source forge.although getting this stuff.what else to do?
                • 5. Re: ntfs mount on oel 5.2
                  Tommyreynolds-Oracle
                  The fuse files may be there but unless you used an RPM to install them, the rpm(8) utility does know about them.

                  You should be able to get an RPM for this from Dag as well.
                  • 6. Re: ntfs mount on oel 5.2
                    661723
                    [root@localhost fuse-2.6.3]# ./configure
                    checking build system type... x86_64-unknown-linux-gnu
                    checking host system type... x86_64-unknown-linux-gnu
                    checking target system type... x86_64-unknown-linux-gnu
                    checking for a BSD-compatible install... /usr/bin/install -c
                    checking whether build environment is sane... yes
                    checking for gawk... gawk
                    checking whether make sets $(MAKE)... yes
                    checking for style of include used by make... GNU
                    checking for gcc... gcc
                    checking for C compiler default output file name... a.out
                    checking whether the C compiler works... yes
                    checking whether we are cross compiling... no
                    checking for suffix of executables... 
                    checking for suffix of object files... o
                    checking whether we are using the GNU C compiler... yes
                    checking whether gcc accepts -g... yes
                    checking for gcc option to accept ISO C89... none needed
                    checking dependency style of gcc... gcc3
                    checking for a sed that does not truncate output... /bin/sed
                    checking for grep that handles long lines and -e... /bin/grep
                    checking for egrep... /bin/grep -E
                    checking for fgrep... /bin/grep -F
                    checking for ld used by gcc... /usr/bin/ld
                    checking if the linker (/usr/bin/ld) is GNU ld... yes
                    checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
                    checking the name lister (/usr/bin/nm -B) interface... BSD nm
                    checking whether ln -s works... yes
                    checking the maximum length of command line arguments... 32768
                    checking whether the shell understands some XSI constructs... yes
                    checking for /usr/bin/ld option to reload object files... -r
                    checking how to recognise dependent libraries... pass_all
                    checking for ar... ar
                    checking for strip... strip
                    checking for ranlib... ranlib
                    checking command to parse /usr/bin/nm -B output from gcc object... ok
                    checking how to run the C preprocessor... gcc -E
                    checking for ANSI C header files... yes
                    checking for sys/types.h... yes
                    checking for sys/stat.h... yes
                    checking for stdlib.h... yes
                    checking for string.h... yes
                    checking for memory.h... yes
                    checking for strings.h... yes
                    checking for inttypes.h... yes
                    checking for stdint.h... yes
                    checking for unistd.h... yes
                    checking for dlfcn.h... yes
                    checking for objdir... .libs
                    checking if gcc supports -fno-rtti -fno-exceptions... no
                    checking for gcc option to produce PIC... -fPIC -DPIC
                    checking if gcc PIC flag -fPIC -DPIC works... yes
                    checking if gcc static flag -static works... yes
                    checking if gcc supports -c -o file.o... yes
                    checking if gcc supports -c -o file.o... (cached) yes
                    checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
                    checking whether -lc should be explicitly linked in... no
                    checking dynamic linker characteristics... GNU/Linux ld.so
                    checking how to hardcode library paths into programs... immediate
                    checking whether stripping libraries is possible... yes
                    checking if libtool supports shared libraries... yes
                    checking whether to build shared libraries... yes
                    checking whether to build static libraries... yes
                    checking for gcc... (cached) gcc
                    checking whether we are using the GNU C compiler... (cached) yes
                    checking whether gcc accepts -g... (cached) yes
                    checking for gcc option to accept ISO C89... (cached) none needed
                    checking dependency style of gcc... (cached) gcc3
                    checking whether gcc and cc understand -c and -o together... yes
                    checking for fork... yes
                    checking for setxattr... yes
                    checking for fdatasync... yes
                    checking for struct stat.st_atim... yes
                    checking for struct stat.st_atimespec... no
                    checking for library containing clock_gettime... -lrt
                    checking selinux/selinux.h usability... yes
                    checking selinux/selinux.h presence... yes
                    checking for selinux/selinux.h... yes
                    checking for getfilecon in -lselinux... yes
                    configure: creating ./config.status
                    config.status: creating fuse.pc
                    config.status: creating Makefile
                    config.status: creating lib/Makefile
                    config.status: creating util/Makefile
                    config.status: creating example/Makefile
                    config.status: creating include/Makefile
                    config.status: creating include/config.h
                    config.status: executing depfiles commands
                    config.status: executing libtool commands
                    === configuring in kernel (/home/oracle/softwares/fuse-2.6.3/kernel)
                    configure: running /bin/sh ./configure '--prefix=/usr/local'  --cache-file=/dev/null --srcdir=.
                    checking for a BSD-compatible install... /usr/bin/install -c
                    checking if FUSE is loaded as a module... no
                    checking if FUSE module is built into the kernel... no
                    checking if FUSE module is from official kernel... no
                    checking kernel source directory... Not found
                    configure: error:
                            *** Please specify the location of the kernel source with
                            *** the '--with-kernel=SRCDIR' option
                    configure: error: ./configure failed for kernel
                    configure: error: ./configure failed for kernel
                    i am using fuse-2.6.3.tar. pack
                    what to do?
                    • 7. Re: ntfs mount on oel 5.2
                      Tommyreynolds-Oracle
                      I refer the honorable gentleman to the answer I gave some moments ago:
                      The fuse files may be there but unless you used an RPM to install them+, the rpm(8) utility does know about them.

                      You should be able to get an RPM for this from Dag as well.
                      • 8. Re: ntfs mount on oel 5.2
                        661723
                        for 2.8 i found a bit optimistic result.,but still i got:
                        # rpm -ivh fuse-ntfs-3g-devel-1.616-1.el5.rf.x86_64.rpm
                        warning: fuse-ntfs-3g-devel-1.616-1.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
                        error: Failed dependencies:
                                fuse-ntfs-3g = 1.616-1.el5.rf is needed by fuse-ntfs-3g-devel-1.616-1.el5.rf.x86_64
                                libntfs-3g.so.4()(64bit) is needed by fuse-ntfs-3g-devel-1.616-1.el5.rf.x86_64
                        [root@localhost fuse-2.8.0]# rpm -ivh fuse-ntfs-3g-1.1104-1.el5.rf.x86_64.rpm
                        warning: fuse-ntfs-3g-1.1104-1.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
                        error: Failed dependencies:
                                fuse >= 2.6.3 is needed by fuse-ntfs-3g-1.1104-1.el5.rf.x86_64
                                libfuse.so.2()(64bit) is needed by fuse-ntfs-3g-1.1104-1.el5.rf.x86_64
                                libfuse.so.2(FUSE_2.2)(64bit) is needed by fuse-ntfs-3g-1.1104-1.el5.rf.x86_64
                                libfuse.so.2(FUSE_2.5)(64bit) is needed by fuse-ntfs-3g-1.1104-1.el5.rf.x86_64
                                libfuse.so.2(FUSE_2.6)(64bit) is needed by fuse-ntfs-3g-1.1104-1.el5.rf.x86_64
                        # modprobe fuse
                        FATAL: Module fuse not found.
                        • 9. Re: ntfs mount on oel 5.2
                          661723
                          [root@localhost ~]# rpm -ivh Desktop/fuse-2.7.4-1.el5.rf.x86_64.rpm
                          warning: Desktop/fuse-2.7.4-1.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
                          Preparing...                ########################################### [100%]
                             1:fuse                   warning: /etc/init.d/fuse saved as /etc/init.d/fuse.rpmorig
                          warning: /etc/udev/rules.d/99-fuse.rules saved as /etc/udev/rules.d/99-fuse.rules.rpmorig
                          ########################################### [100%]
                          [root@localhost ~]# rpm -ivh Desktop/fuse-ntfs-3g-1.913-1.el5.rf.x86_64.rpm
                          warning: Desktop/fuse-ntfs-3g-1.913-1.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
                          Preparing...                ########################################### [100%]
                             1:fuse-ntfs-3g           ########################################### [100%]
                          [root@localhost ~]# 
                          but still its not mounting my external hdd what to do?
                          [root@localhost fuse-2.6.3]# mount -t ntfs-3g -o gid=1000,uid=1000,dmask=022 /dev/sdf1 /media/key
                          FATAL: Module fuse not found.
                          Failed to access '/dev/sdf1': No such file or directory
                          • 10. Re: ntfs mount on oel 5.2
                            Tommyreynolds-Oracle
                            Download and install all the RPM's with a single command:
                            # /bin/rpm -Uvh *.rpm
                            Keep adding RPM packages to your directory until it all installs at once.
                            • 11. Re: ntfs mount on oel 5.2
                              661723
                              should i need to install all the rpm available in that page???i have installed lib module too.its still not working.hope that develepment pack is not required.
                              [root@localhost ~]# rpm -ivh Desktop/fuse-libs-2.7.4-8_12.el5.x86_64.rpm
                              warning: Desktop/fuse-libs-2.7.4-8_12.el5.x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 66534c2b
                              Preparing...                ########################################### [100%]
                                 1:fuse-libs              ########################################### [100%]
                              [root@localhost ~]# man ntfs-3g
                              Formatting page, please wait...
                              [root@localhost ~]# rpm -ivh Desktop/bonnie++-1.03-1.a.2.el5.rf.x86_64.rpm
                              warning: Desktop/bonnie++-1.03-1.a.2.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
                              Preparing...                ########################################### [100%]
                                 1:bonnie++               ########################################### [100%]
                              [root@localhost ~]# rpm -ivh Desktop/fuse-obexfs-0.10-1.el5.rf.x86_64.rpm
                              warning: Desktop/fuse-obexfs-0.10-1.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
                              error: Failed dependencies:
                                      libbfb.so.0()(64bit) is needed by fuse-obexfs-0.10-1.el5.rf.x86_64
                                      libmulticobex.so.1()(64bit) is needed by fuse-obexfs-0.10-1.el5.rf.x86_64
                                      libobexftp >= 0.19 is needed by fuse-obexfs-0.10-1.el5.rf.x86_64
                                      libobexftp.so.0()(64bit) is needed by fuse-obexfs-0.10-1.el5.rf.x86_64
                              • 12. Re: ntfs mount on oel 5.2
                                721050
                                i am facing problem too:
                                [root@localhost ~]# sfdisk -l 
                                
                                Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track
                                Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
                                
                                   Device Boot Start     End   #cyls    #blocks   Id  System
                                /dev/sda1   *      0+    130     131-   1052226   83  Linux
                                /dev/sda2        131    4046    3916   31455270   83  Linux
                                /dev/sda3       4047    5351    1305   10482412+  fd  Linux raid autodetect
                                /dev/sda4       5352   19456   14105  113298412+   5  Extended
                                /dev/sda5       5352+   6656    1305-  10482381   8e  Linux LVM
                                /dev/sda6       6657+   7961    1305-  10482381   83  Linux
                                /dev/sda7       7962+   8222     261-   2096451   82  Linux swap / Solaris
                                
                                Disk /dev/sdb: 19457 cylinders, 255 heads, 63 sectors/track
                                Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
                                
                                   Device Boot Start     End   #cyls    #blocks   Id  System
                                /dev/sdb1          0+   5221    5222-  41945683+   7  HPFS/NTFS
                                /dev/sdb2   *   5222   19455   14234  114334605    f  W95 Ext'd (LBA)
                                                start: (c,h,s) expected (1023,254,63) found (1023,0,1)
                                /dev/sdb3          0       -       0          0    0  Empty
                                /dev/sdb4          0       -       0          0    0  Empty
                                /dev/sdb5       5222+  10443    5222-  41945683+   7  HPFS/NTFS
                                                start: (c,h,s) expected (1023,254,63) found (1023,1,1)
                                /dev/sdb6      10444+  19455-   9012-  72387584    7  HPFS/NTFS
                                [root@localhost ~]# mount.ntfs-3g /dev/sdb9 /mnt/temp
                                ntfs-3g: Failed to access volume '/dev/sdb9': No such file or directory
                                
                                ntfs-3g 2009.4.4 integrated FUSE 27 - Third Generation NTFS Driver
                                
                                Copyright (C) 2005-2007 Yura Pakhuchiy
                                Copyright (C) 2006-2009 Szabolcs Szakacsits
                                Copyright (C) 2007-2009 Jean-Pierre Andre
                                Copyright (C) 2009 Erik Larsson
                                
                                Usage:    ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
                                
                                Options:  ro (read-only mount), remove_hiberfile, uid=, gid=,
                                          umask=, fmask=, dmask=, streams_interface=.
                                          Please see the details in the manual (type: man ntfs-3g).
                                
                                Example: ntfs-3g /dev/sda1 /mnt/windows
                                
                                Ntfs-3g news, support and information:  http://ntfs-3g.org
                                [root@localhost ~]# mount.ntfs-3g /dev/sdb6 /mnt/temp
                                FATAL: Module fuse not found.
                                The disk contains an unclean file system (0, 0).
                                The file system wasn't safely closed on Windows. Fixing.
                                ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
                                [root@localhost ~]# mount.ntfs-3g /dev/sdb6 /mnt/temp
                                FATAL: Module fuse not found.
                                ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
                                [root@localhost ~]# mount.ntfs-3g /dev/sdb5 /mnt/temp
                                FATAL: Module fuse not found.
                                The disk contains an unclean file system (0, 0).
                                The file system wasn't safely closed on Windows. Fixing.
                                ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
                                [root@localhost ~]# mount.ntfs-3g /dev/sdb1 /mnt/temp
                                FATAL: Module fuse not found.
                                The disk contains an unclean file system (0, 0).
                                The file system wasn't safely closed on Windows. Fixing.
                                ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
                                what to do?any idea about this?shall i loose all data of my external hdd?
                                • 13. Re: ntfs mount on oel 5.2
                                  661723
                                  i have tried this but still its not working:
                                  [root@localhost Desktop]# rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
                                  [root@localhost Desktop]# rpm -i *.rpm
                                          package rpmforge-release-0.3.6-1.el5.rf is already installed
                                  [root@localhost Desktop]# yum --enablerepo=rpmforge install fuse fuse-ntfs-3g dkms dkms-fuse 
                                  Loading "security" plugin
                                  rpmforge                  100% |=========================| 1.1 kB    00:00     
                                  primary.xml.gz            100% |=========================| 3.4 MB    00:18     
                                  rpmforge  : ################################################## 9396/9396
                                  Setting up Install Process
                                  Parsing package install arguments
                                  Package fuse - 2.7.4-1.el5.rf.x86_64 is already installed.
                                  Package fuse-ntfs-3g - 1.913-1.el5.rf.x86_64 is already installed.
                                  Resolving Dependencies
                                  --> Running transaction check
                                  ---> Package dkms-fuse.noarch 0:2.7.4-1.nodist.rf set to be updated
                                  ---> Package dkms.noarch 0:2.0.22.0-1.el5.rf set to be updated
                                  ---> Package fuse-ntfs-3g.x86_64 0:2009.4.4-2.el5.rf set to be updated
                                  --> Finished Dependency Resolution
                                  
                                  Dependencies Resolved
                                  
                                  =============================================================================
                                   Package                 Arch       Version          Repository        Size 
                                  =============================================================================
                                  Installing:
                                   dkms-fuse               noarch     2.7.4-1.nodist.rf  rpmforge           70 k
                                  Updating:
                                   fuse-ntfs-3g            x86_64     2009.4.4-2.el5.rf  rpmforge          382 k
                                  Installing for dependencies:
                                   dkms                    noarch     2.0.22.0-1.el5.rf  rpmforge           62 k
                                  
                                  Transaction Summary
                                  =============================================================================
                                  Install      2 Package(s)         
                                  Update       1 Package(s)         
                                  Remove       0 Package(s)         
                                  
                                  Total download size: 515 k
                                  Is this ok [y/N]: y
                                  Downloading Packages:
                                  (1/3): fuse-ntfs-3g-2009. 100% |=========================| 382 kB    00:03     
                                  (2/3): dkms-2.0.22.0-1.el 100% |=========================|  62 kB    00:01     
                                  (3/3): dkms-fuse-2.7.4-1. 100% |=========================|  70 kB    00:01     
                                  Running rpm_check_debug
                                  Running Transaction Test
                                  Finished Transaction Test
                                  Transaction Test Succeeded
                                  Running Transaction
                                    Installing: dkms                         ######################### [1/4] 
                                    Installing: dkms-fuse                    ######################### [2/4] 
                                    Updating  : fuse-ntfs-3g                 ######################### [3/4] 
                                    Cleanup   : fuse-ntfs-3g                 ######################### [4/4] 
                                  
                                  Installed: dkms-fuse.noarch 0:2.7.4-1.nodist.rf
                                  Dependency Installed: dkms.noarch 0:2.0.22.0-1.el5.rf
                                  Updated: fuse-ntfs-3g.x86_64 0:2009.4.4-2.el5.rf
                                  Complete!
                                  [root@localhost Desktop]# mount /dev/sdb1 /mnt/usb -t ntfs-3g
                                  FATAL: Module fuse not found.
                                  ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
                                  [root@localhost Desktop]# modprobe fuse
                                  FATAL: Module fuse not found.
                                  [root@localhost Desktop]# 
                                  do i need this?
                                  [http://www.linux-ntfs.org/doku.php?id=downloads]
                                  [its not working at all|http://blog.irwan.name/?p=36]
                                  • 14. Re: ntfs mount on oel 5.2
                                    661723
                                    [root@localhost ~]# apt-get install fuse-kmdl
                                    Reading Package Lists... Done
                                    Building Dependency Tree... Done
                                    E: Couldn't find package fuse-kmdl
                                    [root@localhost ~]# apt-get install fuse-kmdl
                                    Reading Package Lists... Done
                                    Building Dependency Tree... Done
                                    E: Couldn't find package fuse-kmdl
                                    [root@localhost ~]# apt-get install fuse*
                                    Reading Package Lists... Done
                                    Building Dependency Tree... Done
                                    Selecting fuse-smb for 'fuse*'
                                    Selecting fuse-devel for 'fuse*'
                                    Selecting libfuse.so.2(FUSE_2.4)(64bit) for 'fuse*'
                                    Package libfuse.so.2(FUSE_2.4)(64bit) is a virtual package provided by:
                                      fuse-libs 2.7.4-8_12.el5 [Installed]
                                      fuse 2.7.4-1.el5.rf [Installed]
                                    You should explicitly select one to install.
                                    Selecting libfusion-0.9.so.25()(64bit) for 'fuse*'
                                    Selecting libfuse.so.2()(64bit) for 'fuse*'
                                    Package libfuse.so.2()(64bit) is a virtual package provided by:
                                      fuse-libs 2.7.4-8_12.el5 [Installed]
                                      fuse 2.7.4-1.el5.rf [Installed]
                                    You should explicitly select one to install.
                                    Selecting fuse-ntfs-3g-devel for 'fuse*'
                                    Selecting fuse-encfs for 'fuse*'
                                    Selecting fuseiso for 'fuse*'
                                    Selecting fuse-iso for 'fuseiso'
                                    Selecting libfuse.so.2(FUSE_2.6)(64bit) for 'fuse*'
                                    Package libfuse.so.2(FUSE_2.6)(64bit) is a virtual package provided by:
                                      fuse-libs 2.7.4-8_12.el5 [Installed]
                                      fuse 2.7.4-1.el5.rf [Installed]
                                    You should explicitly select one to install.
                                    Selecting /sbin/fuser for 'fuse*'
                                    Selecting psmisc for '/sbin/fuser'
                                    Selecting fuse-sshfs for 'fuse*'
                                    Selecting fuse-ntfs-3g for 'fuse*'
                                    Selecting ntfsprogs-fuse for 'fuse*'
                                    Selecting fuse-ntfs-3g for 'ntfsprogs-fuse'
                                    Selecting fuse-hpafs for 'fuse*'
                                    Selecting fuse-cryptofs for 'fuse*'
                                    Selecting config(fuse) for 'fuse*'
                                    Selecting fuse for 'config(fuse)'
                                    Selecting config(fuse-davfs2) for 'fuse*'
                                    Selecting fuse-davfs2 for 'config(fuse-davfs2)'
                                    Selecting libfusion-1.0.so.0()(64bit) for 'fuse*'
                                    Selecting fuse-unionfs for 'fuse*'
                                    Selecting dkms-fuse for 'fuse*'
                                    Selecting libfuse.so.2(FUSE_2.5)(64bit) for 'fuse*'
                                    Package libfuse.so.2(FUSE_2.5)(64bit) is a virtual package provided by:
                                      fuse-libs 2.7.4-8_12.el5 [Installed]
                                      fuse 2.7.4-1.el5.rf [Installed]
                                    You should explicitly select one to install.
                                    Selecting libfuse for 'fuse*'
                                    Selecting fuse for 'libfuse'
                                    Selecting Fuse.so()(64bit) for 'fuse*'
                                    Selecting perl-Fuse for 'Fuse.so()(64bit)'
                                    Selecting fuse-curlftpfs for 'fuse*'
                                    Selecting fuse-obexfs for 'fuse*'
                                    Selecting fuse-davfs2 for 'fuse*'
                                    Selecting unionfs-fuse for 'fuse*'
                                    Selecting fuse-unionfs for 'unionfs-fuse'
                                    Selecting libfuse.so.2(FUSE_2.7)(64bit) for 'fuse*'
                                    Package libfuse.so.2(FUSE_2.7)(64bit) is a virtual package provided by:
                                      fuse-libs 2.7.4-8_12.el5 [Installed]
                                      fuse 2.7.4-1.el5.rf [Installed]
                                    You should explicitly select one to install.
                                    Selecting libfusion-1.2.so.0()(64bit) for 'fuse*'
                                    Selecting directfb for 'libfusion-1.2.so.0()(64bit)'
                                    Selecting libfuse.so.2(FUSE_2.2)(64bit) for 'fuse*'
                                    Package libfuse.so.2(FUSE_2.2)(64bit) is a virtual package provided by:
                                      fuse-libs 2.7.4-8_12.el5 [Installed]
                                      fuse 2.7.4-1.el5.rf [Installed]
                                    You should explicitly select one to install.
                                    Selecting kernel(drivers_message_fusion) for 'fuse*'
                                    Selecting kernel-debug for 'kernel(drivers_message_fusion)'
                                    Selecting fuse-clamfs for 'fuse*'
                                    Selecting fuse-libs for 'fuse*'
                                    Selecting fuse for 'fuse*'
                                    Selecting perl-Fuse for 'fuse*'
                                    Selecting perl(Fuse) for 'fuse*'
                                    Selecting perl-Fuse for 'perl(Fuse)'
                                    Selecting fuse-iso for 'fuse*'
                                    The following extra packages will be installed:
                                       commoncpp2 (1.6.2-1.el5.rf)
                                       fuse-clamfs (0.9.1-2.el5.rf)
                                       fuse-cryptofs (0.6.0-1.el5.rf)
                                       fuse-curlftpfs (0.9.1-1.el5.rf)
                                       fuse-devel (2.7.4-1.el5.rf)
                                       fuse-encfs (1.4.1-1.el5.rf)
                                       fuse-obexfs (0.12-1.el5.rf)
                                       fuse-smb (0.8.7-1.el5.rf)
                                       libobexftp (0.22-1.el5.rf)
                                       poco (1.3.0-1.el5.rf)
                                       rlog (1.3.7-1.el5.rf)
                                    The following NEW packages will be installed:
                                       commoncpp2 (1.6.2-1.el5.rf)
                                       fuse-clamfs (0.9.1-2.el5.rf)
                                       fuse-cryptofs (0.6.0-1.el5.rf)
                                       fuse-curlftpfs (0.9.1-1.el5.rf)
                                       fuse-devel (2.7.4-1.el5.rf)
                                       fuse-encfs (1.4.1-1.el5.rf)
                                       fuse-obexfs (0.12-1.el5.rf)
                                       fuse-smb (0.8.7-1.el5.rf)
                                       libobexftp (0.22-1.el5.rf)
                                       poco (1.3.0-1.el5.rf)
                                       rlog (1.3.7-1.el5.rf)
                                    0 upgraded, 11 newly installed, 0 removed and 25 not upgraded.
                                    E: Package libfuse.so.2(FUSE_2.4)(64bit) is a virtual package with multiple good providers.
                                    
                                    E: Package libfusion-0.9.so.25()(64bit) is a virtual package with no good providers.
                                    
                                    E: Package libfuse.so.2()(64bit) is a virtual package with multiple good providers.
                                    
                                    E: Package libfuse.so.2(FUSE_2.6)(64bit) is a virtual package with multiple good providers.
                                    
                                    E: Package libfusion-1.0.so.0()(64bit) is a virtual package with no good providers.
                                    
                                    E: Package libfuse.so.2(FUSE_2.5)(64bit) is a virtual package with multiple good providers.
                                    
                                    E: Package libfuse.so.2(FUSE_2.7)(64bit) is a virtual package with multiple good providers.
                                    
                                    E: Package libfuse.so.2(FUSE_2.2)(64bit) is a virtual package with multiple good providers.
                                    
                                    [root@localhost ~]# apt-get install kernel
                                    Reading Package Lists... Done
                                    Building Dependency Tree... Done
                                    Package kernel is a virtual package provided by:
                                      kernel#2.6.18-92.el5 2.6.18-92.el5 [Installed]
                                      kernel-xen 2.6.18-92.el5 [Installed]
                                      kernel-debug 2.6.18-92.el5 [Installed]
                                    You should explicitly select one to install.
                                    E: Package kernel is a virtual package with multiple good providers.
                                    
                                    
                                    [root@localhost ~]# ntfs-3g /dev/sdc1 /mnt/temp
                                    FATAL: Module fuse not found.
                                    ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
                                    
                                    [root@localhost ~]# rpm -qa|grep fuse
                                    dkms-fuse-2.7.4-1.nodist.rf
                                    fuse-hpafs-0.1.0-1.el5.rf
                                    fuse-davfs2-1.2.2-2.el5.rf
                                    fuse-ntfs-3g-2009.4.4-2.el5.rf
                                    fuse-2.7.4-1.el5.rf
                                    fuse-ntfs-3g-devel-2009.4.4-2.el5.rf
                                    fuse-unionfs-0.23-1.el5.rf
                                    fuse-libs-2.7.4-8_12.el5
                                    fuse-sshfs-2.2-1.el5.rf
                                    fuse-iso-0.0.20070708-2.el5.rf
                                    what next to install??probably there is no package is left to install.still its saying no fuse device found...

                                    Edited by: mango_boy on Oct 4, 2009 7:16 PM