2 Replies Latest reply on Oct 21, 2010 8:58 AM by 806667

    How to Replace battery Sun Storagetek NAS 5220

    806667
      Hi, i have one problem: i need to replace the battery in my NAS5220 (with firmware 4.22 M1).
      I think that is hot swap and i need the procedure to reset the battery age.

      Can you help me?

      Thanks!!
        • 1. Re: How to Replace battery Sun Storagetek NAS 5220
          806410
          Try having a look at the administration document here. It contains the battery age reset procedure.

          http://docs.sun.com/source/819-4284-11/index.html
          • 2. Re: How to Replace battery Sun Storagetek NAS 5220
            806667
            solarispro wrote:
            Try having a look at the administration document here. It contains the battery age reset procedure.

            http://docs.sun.com/source/819-4284-11/index.html
            Ok, thanks.
            In this manual i have found only this procedure:

            Setting the Controller Time and Battery Age

            To set the redundant array of independent disks (RAID) controller time and battery age for Sun StorageTek 5310 and Sun StorageTek 5320 NAS appliances and gateway systems. Specify the controller variable as a particular controller number, or 0..N to request all controllers.

            * To reset the battery age for one or more controllers, enter:

            raidctl set type=lsi target=battery-age ctlr=controller

            * To synchronize the time with the server's time for one or more controllers, enter:

            raidctl set type=lsi target=ctlr_time-age ctlr=controller

            To obtain Help on subcommands, enter raidctl help at the command line.

            It's the same for the NAS 5220?
            Another question: these batteries are hotswap without any procedure?
            Because in this manual i don't have found any procedure.

            Thanks!