This discussion is archived
1 Reply Latest reply: Jan 7, 2010 2:57 PM by 807557 RSS

SB 6000 CMM ....After Firmware upgrade ..... Login Prompt is not coming

807557 Newbie
Currently Being Moderated
Hi,

I have a SB 6000 , which contains Three server X6250 , X6220 & T6xxx .
My CMM firmware level was 1.1.8 . I upgraded the Firmware to latest 3.x .
After the upgrade the CMM rebooted , but the Login prompt is not coming and its stoping on this .

Boot log of CMM after the Firmware upgrade .

Checking configuration files state ...
Image date: Wed Oct 7 18:28:02 PDT 2009     Image revision: 48988
Conf date: Wed Oct 7 18:28:02 PDT 2009     Conf revision: 48988
Configuration files state good after upgrade.
Mounting local filesystems...
Running ldconfig...done

{color:#ff0000}_Starting Platform Initialization: c10init._
Starting FRU update program: frutool.

{color:#000000}after that there is no respnse on Serial . the ere is no LED blinking in CMM Module .

Any help ... {color}

Thanks
{color}
  • 1. Re: SB 6000 CMM ....After Firmware upgrade ..... Login Prompt is not coming
    807557 Newbie
    Currently Being Moderated
    I am in the exact same boat now.

    Upgraded from 1.1.6 to the 3.1.2 firmware (ILOM-3_0_6_11_b-Sun_Blade_6000.ima ).

    Server restarted and now the CMM module is dark and I get this same response below, where it has been hanging, all lights out on the back CMM module and on the front left top of the chassis - and the Chassis is ON.

    HELP!!!!



    Checking configuration files state ...
    Image date: Wed Oct 7 18:28:02 PDT 2009 Image revision: 48988
    Conf date: Wed Oct 7 18:28:02 PDT 2009 Conf revision: 48988
    Configuration files state good after upgrade.
    Mounting local filesystems...
    Running ldconfig...done

    Starting Platform Initialization: c10init.
    Starting FRU update program: frutool.