I have just inserted a new x6270 blade in my sun6000 chassi. We have only used X6250 blades in this chassi so far.
I have configured the IP-address of the ILO-port on the blade. I can access that IP-address using SSH.
But I can not access the ILO webpage!
As seen below bott HTTP and HTTPS services are enabled. -> show http
port = 80
secureredirect = enabled servicestate = enabled -> show https
port = 443 servicestate = enabled
The ILO versions on my system are:
CMM = 126.96.36.199
X6250 = 188.8.131.52
X6270 = 184.108.40.206
I believe these are all the latest ILO SW available.
To get around problem of x6270 Blades BUI not working when
ssh functions correctly the firmware needs to be reflashed.
Refer to the document
Sun Integrated Lights Out
Manager (ILOM) 3.0
CLI Procedures Guide
This will provide instructions to download firmware and cli procedure
to reflash firmware. - follow procedure to upgrade firmware to
relash same revision.