2 Replies Latest reply: Jul 1, 2010 5:06 PM by 807557 RSS

    sunfire 4800 cannot powerup. need help

    807557
      Please help...I cannot not power up the system. All leds (sc0,sc2,sb0,sb2,sb4,rp0,rp2 ...) are not lit up.
      got amber light blinking from all three PS ( tested: all three PS are good. ). please help.
      thank you.
        • 1. Re: sunfire 4800 cannot powerup. need help
          796238
          Hi,

          Are you able to login to SC ? If so please collect below command outputs from SC

          SC> showlogs -v
          SC> showplatform -v
          SC> showboards -v
          SC> showsc -v
          SC> showenvironment

          If you are unable to login to SC, there could be some issue with the power centerplane or RTS /RTU (which gives input power to PSU for generating DC output).

          In this situation, you might want to log a case with Sun to resolve the issue.

          HTH

          -Mehul
          • 2. Re: sunfire 4800 cannot powerup. need help
            807557
            Hello Mehul,
            Thank you for your respond. I found out the system is using 220v ac input not 110v that
            I was using to boot up the system. Weird thing that they built the ac input adapter same
            as the 110v power cord adapter. Thanks again.