Could anyone please tell me how to reset the Lomlite Console Password Reset in SunFire V100?
I have connected the server thru remote console and getting the following in the prompt:
Lomlite Console Login:
I have had the same issue, and have been able to get to the lom> prompt using JP13, but this does not allow me to delete the prevoiusly configured users or create my own. Is there more that must be done to be able to do this?
On my V100, when I use the JP13 reset, the console reports the following:
LOMlite starting up.
CPU type: H8/3437S, mode 3
Ram-test: 2048 bytes OK
Initialising i2c bus: OK
Searching for EEPROMs: 50(cfg)
I2c eeprom @50: OK
i2c bus speed code 01... OK
Probing for lm80s: none
Probing for lm75s: 48
Initialising lm75 @48: OK
System functions: PSUs fans breakers rails gpio temps host CLI ebus clock
This V100 was purchased from eBay and as such I do not have any information on
the login/password. Surely there is a way to reset this or some default login/password?
Thanks in advance.
I cannot find the JP13 jumper on the motherboard. I used to have Sun FE manuals but got rid of them last year because I thought they were available online. I appear to be mistaken or they have been removed.