6 Replies Latest reply: Jan 19, 2010 9:43 AM by 807567 RSS

    SMC agent on M9000 service processor

    807567
      Hi, I'm trying to monitor an M9000 Platform

      at this time domain agents are up and running but the service processor agent's is stopped and I can't find how to start it.

      this is the output from setsunmc and showsunmc

      XSCF> setsunmc -s 140.126.65.82 -z segob -c public -p 1161 -t 162 -e 163 -a 161 -d 1161
      setsunmc: Updating Sun MC config file

      XSCF> showsunmc
      Agent Status: Disabled, stopped
      Setup Status: Set up
      SunMC Server: 140.126.65.82
      Security Seed: segob
      SNMPv1 Community String: public
      Agent Port: 1161
      Host Trap Port: 162
      Host Event Port: 163
      SNMP Agent Port: 161
      Domain Agent Port: 1161

      XSCF> setsunmc enable
      setsunmc: Agent enabled.
      setsunmc: Note that this command will return before SunMC is completely enabled.

      XSCF> showsunmc
      Agent Status: Enabled, stopped
      Setup Status: Set up
      SunMC Server: 140.126.65.82
      Security Seed: segob
      SNMPv1 Community String: public
      Agent Port: 1161
      Host Trap Port: 162
      Host Event Port: 163
      SNMP Agent Port: 161
      Domain Agent Port: 1161

      Do you have any clue why Agent won't start?

      Thanks for any comment
        • 1. Re: SMC agent on M9000 service processor
          807567
          Is the SNMP agent started? The SunMC agent will proxy the SNMP agent locally on the service processor for some information.
          • 2. Re: SMC agent on M9000 service processor
            807567
            I agree: if you haven't, check showsnmp.

            You may also want to run setsnmp disable, setsnmp enable and then try setting and enabling sunmc.
            • 3. Re: SMC agent on M9000 service processor
              807567
              Dear Sir,

              I also have this problem on our M9000. And I have set and enabled the SNMP then set and enable SunMC, but the Agent status is still "Enabled,Stopped". Please refer to below information and check what's wrong for me, thanks a lot.

              XSCF> setsunmc disable
              setsunmc: Agent disabled.
              setsunmc: Note that this command will return before SunMC is completely disabled.
              XSCF> setsnmp disable
              setsnmp: Agent disabled.
              XSCF> setsnmp enable
              setsnmp: Agent enabled.
              XSCF> setsunmc enable
              setsunmc: Agent enabled.
              setsunmc: Note that this command will return before SunMC is completely enabled.
              XSCF> showsnmp

              Agent Status: Enabled
              Agent Port: 161
              System Location:
              System Contact:
              System Description: SMP HPC of SPARC Enterprise M9000-64

              Trap Hosts:

              Hostname Port Type Community String Username Auth Protocol

              192.168.1.100 162 v2 public n/a n/a

              SNMP V1/V2c:

              Status: Enabled
              Community String: public

              Enabled MIB Modules:

              SP MIB
              FM MIB
              XSCF> showsunmc
              Agent Status: Enabled, stopped
              Setup Status: Set up
              SunMC Server: 192.168.1.100
              Security Seed: 1211
              SNMPv1 Community String: public
              Agent Port: 1161
              Host Trap Port: 162
              Host Event Port: 163
              SNMP Agent Port: 161
              Domain Agent Port: 8161

              Edited by: Yu-Hung on Apr 1, 2008 12:31 AM

              Edited by: Yu-Hung on Apr 1, 2008 12:35 AM
              • 4. Re: SMC agent on M9000 service processor
                807567
                Hi i still having exactly the same problem, I bringup the snmp and the sunmc in the service procesor. does anybody have resolved this issue? thanks a lot.

                P.D. I offerd you my apologies for my terrible english.
                • 5. Re: SMC agent on M9000 service processor
                  807567
                  i find this, maybe could help us.

                  http://sunsolve.sun.com/search/document.do?assetkey=1-62-240405-1

                  pless if you applied this would reply if it works?

                  thanks a lot.
                  • 6. Re: SMC agent on M9000 service processor
                    807567
                    I just came across this thread and have encountered this issue before.

                    Check to see if a name server is set with a "shownameserver" - or use "setnameserver" to set one. Use the man pages for specific syntax use. ie "man setnameserver"

                    There is a requirement to have the nameserver set on the XSCF or the SunMC agent will not start.

                    Hope this helps,
                    Bryan Kelleman