1 Reply Latest reply: Apr 6, 2011 6:52 AM by 845297 RSS

    i am not able to see the new drive

    845297
      I have a Sun Blade 2500 with SUN 5.9 OS installed.I have on hard disk drive in it and now i attached another drive in this system but i am not able to see the new drive when i run the below command

      bash-2.05# echo | format
      Searching for disks...done


      AVAILABLE DISK SELECTIONS:
      0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
      /pci@1d,700000/scsi@4/sd@0,0
      Specify disk (enter its number): Specify disk (enter its number):

      ==============================================
      Although i can see two drives in the output of below command:

      bash-2.05# iostat -E |grep Size
      Size: 73.40GB <73400057856 bytes>
      Size: 73.40GB <73400057856 bytes>
      Size: 0.00GB <0 bytes>

      Edited by: 842294 on Apr 6, 2011 4:40 AM
        • 1. Re: i am not able to see the new drive
          845297
          Resolved

          bash-2.05# cfgadm -c configure c0
          bash-2.05# echo | format
          Searching for disks...done


          AVAILABLE DISK SELECTIONS:
          0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1d,700000/scsi@4/sd@0,0
          1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1d,700000/scsi@4/sd@1,0
          Specify disk (enter its number): Specify disk (enter its number):