7 Replies Latest reply on Jul 28, 2011 9:26 PM by Dude!

    Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

      h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

      Version: B
      Author: Dude, 24. May 2011

      The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
      Access to the Internet is required.

      The instructions cover the following additional topics:

      - Converting Red Hat based Oracle XE installer to Ubuntu.
      - Work-around for missing /sbin/chkconfig tool.
      - Install Oracle XE into a different directory or disk volume.
      - Relocate and configure the Oracle user and default login directory.
      - Uninstall, reconfigure and perform first database backup.
      - Notes and web links.
      - Troubleshooting

      h3. A) System Setup and Prerequisites
      h4. A.1. System Access

      You will need terminal command line, root and system console access to perform the setup tasks.

      To open a Terminal at the system console:
      Menu Applications > Accessories > Terminal
      The following commands will enable remote ssh login with root access:
      sudo apt-get install openssh-server
      sudo passwd root
      ssh root@xe_server_host_name
      h4. A.2. Software Prerequisites

      The following is required in order to install Oracle 11gR2 XE:
      sudo apt-get install alien libaio1 unixodbc
      The following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
      sudo apt-get install vim
      h4. A.3. System Swap space

      Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
      To analyze current swap space and memory configuration:
      sudo cat /proc/meminfo
      To install a 1 GB swapfile named swapfile in /, for example:
      sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
      (this may take a while)
      sudo mkswap /swapfile
      sudo swapon /swapfile
      sudo cp /etc/fstab /etc/fstab.orig
      sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
      sudo swapon -a
      sudo swapon -s
      h4. A.4. Kernel Parameters

      Oracle 11g XE requires the following additional kernel parameters:
      sudo nano /etc/sysctl.d/60-oracle.conf
      (Enter the following)
      # Oracle 11g XE kernel parameters
      net.ipv4.ip_local_port_range=9000 65000
      kernel.sem=250 32000 100 128
      (Save the file)
      Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
      Verify: sudo cat /etc/sysctl.d/60-oracle.conf
      Load new kernel parameters: 
      sudo service procps start
      sudo sysctl -q fs.file-max
      -> fs.file-max = 6815744
      h4. A.5. Oracle Installation Directory

      The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:

      Install Oracle XE to separate disk volume:
      From the system console menu: System > Administration > Disk Utility
      Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
      Notice the device name e.g. /dev/sdb
      Get the drive UUID:
      sudo blkid
      e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
      Modify /etc/fstab to automatically mount the volume at system startup:
      sudo cp /etc/fstab /etc/fstab.original
      sudo nano /etc/fstab
      (Add the following, using determined UUID, for exmple)
      UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
      (Save the file)
      Create the mount-point, mount the new volume and set ownership and privileges:
      sudo mkdir /u01
      sudo mount -a
      sudo chown root:root /u01
      sudo chmod 755 /u01
      df -h
      or restart the system
      You can also install Oracle XE into a specific directory:
      Create a symbolic link to store the installation into an existing directory, for instance:
      sudo mkdir /home/oracle-xe
      sudo ln -s /home/oracle-xe /u01
      h3. C) Oracle 11g XE Download and Installation
      h4. C.1. Download and convert the Installer from Red Hat to Ubuntu

      Please see section E.3. to download the Oracle 11gR2 XE installer.
      Select the version listed for Linux x64.
      sudo unzip linux.x64_11gR2_OracleXE.zip
      sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
      (This may take a while)
      h4. C.2. Create a special chkconfig script

      The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
      Create /sbin/chconfig:
      sudo nano /sbin/chkconfig
      (Cut and paste the following)
      # Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
      if [[ ! `tail -n1 $file | grep INIT` ]]; then
         echo >> $file
         echo '### BEGIN INIT INFO' >> $file
         echo '# Provides:             OracleXE' >> $file
         echo '# Required-Start:       $remote_fs $syslog' >> $file
         echo '# Required-Stop:        $remote_fs $syslog' >> $file
         echo '# Default-Start:        2 3 4 5' >> $file
         echo '# Default-Stop:         0 1 6' >> $file
         echo '# Short-Description:    Oracle 11g Express Edition' >> $file
         echo '### END INIT INFO' >> $file
      update-rc.d oracle-xe defaults 80 01
      (Save the file)
      Set appropriate execute privileges:
      chmod 755 /sbin/chkconfig
      Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.

      h4. C.3. Install and configure Oracle XE
      sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
      /etc/init.d/oracle-xe configure
      (This will take a while)
      Remove the /sbin/chkconfig script, which is no longer needed.
      sudo rm /sbin/chkconfig
      h4. C.4. Relocate and Configure the Oracle user login

      The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
      Exit all Oracle user sessions:
      sudo /etc/init.d/oracle-xe stop
      sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
      sudo userdel oracle
      sudo useradd -s /bin/bash -G dba -g dba -m oracle
      sudo passwd oracle
      sudo id oracle
      -> uid=1001(oracle) gid=1001(dba) groups=1001(dba)
      h4. C.5. Setup Oracle environment variables

      In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
      sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrc
      h4. C.6. Oracle sudo root access

      It is not essential to allow the Oracle user to use sudo, but it is convenient:
      usermod -G admin oracle
      id oracle
      -> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
      sudo su -
      -> Enter Oracle account password
      h4. C.7. Oracle 11g XE Post-installation

      After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
      The following will correct the problem if necessary:
      Login as user Oracle or use:
      su - oracle
      sqlplus / as sysdba
      At the SQL prompt, enter the following command:
      h3. D) Unintstall, Reconfigure and Troubleshooting
      h4. D.1. Uninstall Oracle 11g XE

      The following will completely uninstall and remove Oracle 11g XE:
      Login as user root:
      sudo su -
      /etc/init.d/oracle-xe stop
      dpkg --purge oracle-xe
      rm -r /u01/app
      rm /etc/default/oracle-xe
      update-rc.d -f oracle-xe remove
      h4. D.2. Reconfigure Oracle 11g XE

      Type the following in a terminal window:
      /etc/init.d/oracle-xe stop
      sudo rm /etc/default/oracle-xe
      /etc/init.d/oracle-xe configure
      h4. D.3. Enable Archivelog mode and perform a database backup
      Login as user Oracle:
      su - oracle
      sqlplus / as sysdba
      At the SQL prompt, enter the following commands:
      shutdown immediate
      startup mount
      alter database archivelog;
      alter database open;
      Login to system console of the Oracle user account:
      Select Applications > Oracle Database 11g Express Edition > Backup Database
      h3. E) Notes
      h4. E.1. Oracle 11g XE limitiations overview

      - It will consume, at most, processing resources equivalent to one CPU.
      - Only one installation of Oracle Database XE can be performed on a single computer.
      - The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
      - The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
      - HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.

      h4. E.2. Documentation and Links

      Official documentation for Oracle 11gR2 XE can be found at:

      h4. E.3. Oracle 11g XE downloads

      The Installer is available from the Oracle Technology Network at:

      h4. E.4 APEX links and archives

      The APEX archives can be found at:
      The APEX download site is:

      h3. F) Troubleshooting

      ... in progress

      Regards and best of luck!

      Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.