could not enable snmpV3: set /SP/services/snmp servicestate=enabled v3=enabled ops center dicovery e — oracle-tech

    Forum Stats

  • 3,715,957 Users
  • 2,242,917 Discussions
  • 7,845,703 Comments

Discussions

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

could not enable snmpV3: set /SP/services/snmp servicestate=enabled v3=enabled ops center dicovery e

2973020
2973020 Member Posts: 1

Hi,

   In ops center while discovering ilom asset we are getting this error.

ERROR Failed to set SNMP trap host for server could not enable snmpV3: set /SP/services/snmp servicestate=enabled v3=enabled

set: No such property /SP/services/snmp/servicestate

Answers

  • Michele Vecchiato
    Michele Vecchiato Member Posts: 30
    edited October 2017

    Hi,

        if the Service Processor (SP) is running a firmware version that does not support SNMPv3, you should update the Oracle ILOM firmware on the SP to the latest version available from My Oracle Support (MOS).

    HTH

    Michele V.

    --

    If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation

  • KarthikK-Oracle
    KarthikK-Oracle Member Posts: 15 Employee
    edited November 2017

    Hi,

    You need to upgrade the firmware to the latest and try discovering it again. If you need any help with the firmware upgrade, please open a service request with the hardware team.

    Thanks,

    Karthik

This discussion has been closed.