Forum Stats

  • 3,875,203 Users
  • 2,266,862 Discussions
  • 7,912,106 Comments

Discussions

Domain configuration in M4000

User_1WIX6
User_1WIX6 Member Posts: 8 Red Ribbon
edited Dec 23, 2019 4:02AM in SPARC Servers

Dear All,

Please help to configure a multiple domain in M4000 server with different (Part No) CPU.

XSCF> showhardconf     

SPARC Enterprise M4000;

    + Serial:XXXXXXXXXX; Operator_Panel_Switch:Locked;

    + Power_Supply_System:Single; SCF-ID:XSCF#0;

    + System_Power:Off; System_Phase:Cabinet Power Off;

    Domain#0 Domain_Status:Powered Off;

*   MBU_A Status:Faulted; Ver:0101h; Serial:BD111002EV  ;

        + FRU-Part-Number:CF00541-0893 08   /541-0893-08          ;

        + Memory_Size:64 GB;

        + Type:1;

*       CPUM#0-CHIP#0 Status:Deconfigured; Ver:0201h; Serial:PP101007WU  ;

            + FRU-Part-Number:CA06761-D105 B0   /375-3477-02          ;

            + Freq:2.150 GHz; Type:16;

            + Core:2; Strand:2;

*       CPUM#0-CHIP#1 Status:Deconfigured; Ver:0201h; Serial:PP101007WU  ;

            + FRU-Part-Number:CA06761-D105 B0   /375-3477-02          ;

            + Freq:2.150 GHz; Type:16;

            + Core:2; Strand:2;

*       CPUM#1-CHIP#0 Status:Deconfigured; Ver:0501h; Serial:PP100902UH  ;

            + FRU-Part-Number:CA06761-D204 B1   /371-4615-02          ;

            + Freq:2.530 GHz; Type:32;

            + Core:4; Strand:2;

*       CPUM#1-CHIP#1 Status:Deconfigured; Ver:0501h; Serial:PP100902UH  ;

            + FRU-Part-Number:CA06761-D204 B1   /371-4615-02          ;

            + Freq:2.530 GHz; Type:32;

            + Core:4; Strand:2;

I have 2 physical CPU with 2 different  part No(375-3477-02 and 541-0893-08), tried to configured domain as below, but after a poweron the both domain got the error as

XSCF> showboards -a

XSB  DID(LSB) Assignment  Pwr  Conn Conf Test    Fault   

---- -------- ----------- ---- ---- ---- ------- --------

00-0 00(00)   Assigned    n    n    n    Testing Normal  

00-1 01(00)   Assigned    n    n    n    Unknown Normal  

00-2 00(01)   Assigned    n    n    n    Testing Normal  

00-3 01(01)   Assigned    n    n    n    Unknown Normal

Date: Dec 22 10:18:33 +03 2019     Code: 80002100-87010000-0503170210780085

    Status: Alarm                  Occurred: Dec 22 10:17:22.753 +03 2019

    FRU: /MBU_A/MEMB#3

    Msg: MAC detected clock fatal failure

Date: Dec 22 10:18:52 +03 2019     Code: 80006000-7d010000-0106405000000000

    Status: Alarm                  Occurred: Dec 22 10:18:50.888 +03 2019

    FRU: /MBU_A

    Msg: SC test error

Date: Dec 22 10:18:53 +03 2019     Code: 80006000-7d010000-0106405000000000

    Status: Alarm                  Occurred: Dec 22 10:18:51.664 +03 2019

    FRU: /MBU_A

    Msg: SC test error

My question is, shall we configure a domain with multiple or single domain with different CPU as above mentioned?.

User_1WIX6

Answers

  • Nik
    Nik Blocked Member Posts: 2,879 Bronze Crown
    edited Dec 22, 2019 10:26AM

    Hi.

    Please show full output of showhardconf and output of commands showstatus ; version -c xcp ; showlogs monitor

    https://docs.oracle.com/cd/E19580-01/819-2210-14/819-2210-14.pdf

    Check memory configuration rules.

    It also possible you have  some hardware problem:

    Sun SPARC[TM] Enterprise M4000/M5000 - MBU_B and MEMB Being Faulted With SCF-8004-8X, SCF-8000-1D, and SCF-8005-MJ Errors. (Doc ID 1296435.1) To BottomTo Bottom

    Regards,

       Nik

  • User_1WIX6
    User_1WIX6 Member Posts: 8 Red Ribbon
    edited Dec 22, 2019 11:33PM

    Dear NIK,

    please find the requested information.

    Here my primary question is, shall we use two different CPU to configure multiple domain?.

    XSCF> showhardconf -M

    SPARC Enterprise M4000;

        + Serial:xxxxxxxxxx; Operator_Panel_Switch:Locked;

        + Power_Supply_System:Single; SCF-ID:XSCF#0;

        + System_Power:Off; System_Phase:Cabinet Power Off;

        Domain#0 Domain_Status:Powered Off;

    *   MBU_A Status:Faulted; Ver:0101h; Serial:BD111002EV  ;

            + FRU-Part-Number:CF00541-0893 08   /541-0893-08          ;

            + Memory_Size:64 GB;

            + Type:1;

    *       CPUM#0-CHIP#0 Status:Deconfigured; Ver:0201h; Serial:PP101007WU  ;

                + FRU-Part-Number:CA06761-D105 B0   /375-3477-02          ;

                + Freq:2.150 GHz; Type:16;

                + Core:2; Strand:2;

    *       CPUM#0-CHIP#1 Status:Deconfigured; Ver:0201h; Serial:PP101007WU  ;

                + FRU-Part-Number:CA06761-D105 B0   /375-3477-02          ;

                + Freq:2.150 GHz; Type:16;

                + Core:2; Strand:2;

    *       CPUM#1-CHIP#0 Status:Deconfigured; Ver:0501h; Serial:PP100902UH  ;

                + FRU-Part-Number:CA06761-D204 B1   /371-4615-02          ;

                + Freq:2.530 GHz; Type:32;

                + Core:4; Strand:2;

    *       CPUM#1-CHIP#1 Status:Deconfigured; Ver:0501h; Serial:PP100902UH  ;

                + FRU-Part-Number:CA06761-D204 B1   /371-4615-02          ;

                + Freq:2.530 GHz; Type:32;

                + Core:4; Strand:2;

    *       MEMB#0 Status:Deconfigured; Ver:0101h; Serial:BF1051HKBW  ;

                + FRU-Part-Number:CF00541-0545 09   /541-0545-09          ;

    *           MEM#0A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43c3149b;

                    + Type:2A; Size:2 GB;

    *           MEM#0B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660FBA-CE6 4146-432e46bf;

                    + Type:2A; Size:2 GB;

    *           MEM#1A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43c2fd03;

                    + Type:2A; Size:2 GB;

    *           MEM#1B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-430621c2;

                    + Type:2A; Size:2 GB;

    *           MEM#2A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43ab7d0b;

                    + Type:2A; Size:2 GB;

    *           MEM#2B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-430689b5;

                    + Type:2A; Size:2 GB;

    *           MEM#3A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43c314de;

                    + Type:2A; Size:2 GB;

    *           MEM#3B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660FBA-CE6 4146-432dfdf2;

                    + Type:2A; Size:2 GB;

    *       MEMB#1 Status:Deconfigured; Ver:0101h; Serial:BF1051HLBR  ;

                + FRU-Part-Number:CF00541-0545 09   /541-0545-09          ;

    *           MEM#0A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43bd4523;

                    + Type:2A; Size:2 GB;

    *           MEM#0B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-430689b2;

                    + Type:2A; Size:2 GB;

    *           MEM#1A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43bd4600;

                    + Type:2A; Size:2 GB;

    *           MEM#1B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660FBA-CE6 4146-43111be9;

                    + Type:2A; Size:2 GB;

    *           MEM#2A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43c2faa3;

                    + Type:2A; Size:2 GB;

    *           MEM#2B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660FBA-CE6 4146-432d5cf0;

                    + Type:2A; Size:2 GB;

    *           MEM#3A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43c2fa46;

                    + Type:2A; Size:2 GB;

    *           MEM#3B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660FBA-CE6 4146-431110ee;

                    + Type:2A; Size:2 GB;

    *       MEMB#2 Status:Deconfigured; Ver:0101h; Serial:BF10031UFN  ;

                + FRU-Part-Number:CF00541-0545 09   /541-0545-09          ;

    *           MEM#0A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a0ddc5;

                    + Type:2A; Size:2 GB;

    *           MEM#0B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a080bc;

                    + Type:2A; Size:2 GB;

    *           MEM#1A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a0ddad;

                    + Type:2A; Size:2 GB;

    *           MEM#1B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-47887303;

                    + Type:2A; Size:2 GB;

    *           MEM#2A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a09e54;

                    + Type:2A; Size:2 GB;

    *           MEM#2B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43811908;

                    + Type:2A; Size:2 GB;

    *           MEM#3A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a0ddca;

                    + Type:2A; Size:2 GB;

    *           MEM#3B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a08178;

                    + Type:2A; Size:2 GB;

    *       MEMB#3 Status:Faulted; Ver:0101h; Serial:BF10020R3K  ;

                + FRU-Part-Number:CF00541-0545 09   /541-0545-09          ;

    *           MEM#0A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a09d26;

                    + Type:2A; Size:2 GB;

    *           MEM#0B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a08012;

                    + Type:2A; Size:2 GB;

    *           MEM#1A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a09d54;

                    + Type:2A; Size:2 GB;

    *           MEM#1B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-4788e1e1;

                    + Type:2A; Size:2 GB;

    *           MEM#2A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a09e1f;

                    + Type:2A; Size:2 GB;

    *           MEM#2B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-4381896e;

                    + Type:2A; Size:2 GB;

    *           MEM#3A Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a09d2a;

                    + Type:2A; Size:2 GB;

    *           MEM#3B Status:Deconfigured;

                    + Code:ce0000000000000001M3 93T5660QZA-CE6 4151-43a08066;

                    + Type:2A; Size:2 GB;

    *       DDC_A#0 Status:Deconfigured;

    *       DDC_A#1 Status:Deconfigured;

    *       DDC_B#0 Status:Deconfigured;

    *   IOU#0 Status:Deconfigured; Ver:0101h; Serial:BF110613XX  ;

            + FRU-Part-Number:CF00541-2240 05   /541-2240-05          ;

            + Type:1;

    *       DDC_A#0 Status:Deconfigured;

    *       DDCR Status:Deconfigured;

    *           DDC_B#0 Status:Deconfigured;

        XSCFU Status:Normal,Active; Ver:0101h; Serial:BF11040RF9  ;

            + FRU-Part-Number:CF00541-0481 05   /541-0481-05          ;

        OPNL Status:Normal; Ver:0101h; Serial:NN11042MDC  ;

            + FRU-Part-Number:CF00541-0850 06   /541-0850-06          ;

        PSU#0 Status:Normal; Serial:0017527-1105022546;

            + FRU-Part-Number:CF00300-2311 0150 /300-2311-01-50;

            + Power_Status:Off; AC:200 V;

        PSU#1 Status:Normal; Serial:0017527-1105022573;

            + FRU-Part-Number:CF00300-2311 0150 /300-2311-01-50;

            + Power_Status:Off; AC:200 V;

        FAN_A#0 Status:Normal;

        FAN_A#1 Status:Normal;

        FANBP_B Status:Normal; Ver:0401h; Serial:NN110225CW  ;

            + FRU-Part-Number:CF00541-3098 01   /541-3098-01          ;

            FAN_B#0 Status:Normal;

            FAN_B#1 Status:Normal;

    XSCF>

    XSCF>   showstatus

    *   MBU_A Status:Faulted;

    *       CPUM#0-CHIP#0 Status:Deconfigured;

    *       CPUM#0-CHIP#1 Status:Deconfigured;

    *       CPUM#1-CHIP#0 Status:Deconfigured;

    *       CPUM#1-CHIP#1 Status:Deconfigured;

    *       MEMB#0 Status:Deconfigured;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       MEMB#1 Status:Deconfigured;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       MEMB#2 Status:Deconfigured;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       MEMB#3 Status:Faulted;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       DDC_A#0 Status:Deconfigured;

    *       DDC_A#1 Status:Deconfigured;

    *       DDC_B#0 Status:Deconfigured;

    *   IOU#0 Status:Deconfigured;

    *       DDC_A#0 Status:Deconfigured;

    *       DDCR Status:Deconfigured;

    *           DDC_B#0 Status:Deconfigured;

    XSCF>

    XSCF> version -c xcp

    XSCF#0 (Active )

    XCP0 (Reserve): 1123

    XCP1 (Current): 1123

    XSCF>showlogs monitor (output trimed )

    Nov 25 09:11:30 Hos2mdev-xscf0 monitor_msg: SCF:Air inlet temperature recovered from middle temperature warning state

    Nov 25 13:49:00 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0 state change (shutdown started, detail#2)

    Nov 25 13:49:01 Hos2mdev-xscf0 monitor_msg: SCF:Domain issued power-off request to RCI target (DomainID 0)

    Nov 25 13:49:04 Hos2mdev-xscf0 monitor_msg: SCF:All domains shutdown started

    Nov 25 13:49:14 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0 state change (Powered off, detail#2)

    Nov 25 13:50:05 Hos2mdev-xscf0 monitor_msg: SCF:System powered off

    Dec 19 11:49:32 Hos2mdev-xscf0 monitor_msg: SCF:Panel mode switch is switched to service position

    Dec 19 12:02:51 Hos2mdev-xscf0 monitor_msg: SCF:Power failure (/PSU#0)

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/CPUM#1

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/CPUM#1

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#3A

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#2A

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:XSCF ready

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#3B

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#2B

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#1A

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#0A

    Dec 19 12:28:43 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#1B

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#2/MEM#0B

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#3A

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#2A

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#3B

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#2B

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#1A

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#0A

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#1B

    Dec 19 12:28:44 Hos2mdev-xscf0 monitor_msg: SCF:Unit configuration change (add) /MBU_A/MEMB#3/MEM#0B

    Dec 19 12:28:56 Hos2mdev-xscf0 monitor_msg: SCF:XSCFU was stopped by power failure. Power failure date is 2019/12/19 12:02:54

    Dec 22 07:25:45 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: XSB#00-0 is unassigned (deleteboard)

    Dec 22 07:26:03 Hos2mdev-xscf0 monitor_msg: SCF:SB configuration changed (quad-XSB mode)

    Dec 22 07:26:34 Hos2mdev-xscf0 monitor_msg: SCF:DCL setting changed (LSB nr. assignment)

    Dec 22 07:27:17 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: XSB#00-0 is assigned (addboard)

    Dec 22 10:01:59 Hos2mdev-xscf0 monitor_msg: SCF:DCL setting changed (LSB nr. assignment)

    Dec 22 10:03:40 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: XSB#00-2 is assigned (addboard)

    Dec 22 10:05:00 Hos2mdev-xscf0 monitor_msg: SCF:DCL setting changed (LSB nr. assignment)

    Dec 22 10:05:30 Hos2mdev-xscf0 monitor_msg: SCF:DCL setting changed (LSB nr. assignment)

    Dec 22 10:06:13 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 1: XSB#00-1 is assigned (addboard)

    Dec 22 10:06:14 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 1: XSB#00-3 is assigned (addboard)

    Dec 22 10:08:58 Hos2mdev-xscf0 monitor_msg: SCF:System powered on

    Dec 22 10:09:38 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0 state change (initialize phase started, detail#0)

    Dec 22 10:09:52 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: Reset released

    Dec 22 10:10:03 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: CPU Check)

    Dec 22 10:10:03 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Banner)

    Dec 22 10:10:03 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Fatal Check)

    Dec 22 10:10:03 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: CPU Register)

    Dec 22 10:10:04 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: STICK)

    Dec 22 10:10:04 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: MMU)

    Dec 22 10:10:04 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Memory Initialize)

    Dec 22 10:10:11 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Memory)

    Dec 22 10:10:34 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Raw UE In Cache)

    Dec 22 10:10:40 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Floating Point Unit)

    Dec 22 10:10:41 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: SC)

    Dec 22 10:10:41 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Cacheable Instruction)

    Dec 22 10:10:42 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Softint)

    Dec 22 10:10:43 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: CPU Cross Call)

    Dec 22 10:10:43 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: CMU-CH)

    Dec 22 10:10:44 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: PCI-CH)

    Dec 22 10:10:50 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Master Device)

    Dec 22 10:11:32 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: DSCP)

    Dec 22 10:11:32 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: SC Check Before STICK Diag)

    Dec 22 10:11:32 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: STICK Stop)

    Dec 22 10:11:32 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: STICK Start)

    Dec 22 10:11:33 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: Error CPU Check)

    Dec 22 10:11:33 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: System Configuration)

    Dec 22 10:11:33 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: System Status Check)

    Dec 22 10:11:33 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: System Status Check After Sync)

    Dec 22 10:11:34 Hos2mdev-xscf0 monitor_msg: SCF:Current domains' phase (DomainID 0 domain phase: OpenBoot Start...)

    Dec 22 10:11:39 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0 state change (OpenBoot PROM complete, detail#8)

    Dec 22 10:17:05 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 1 state change (initialize phase started, detail#0)

    Dec 22 10:17:22 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 1: Reset released

    Dec 22 10:18:36 Hos2mdev-xscf0 Alarm: /MBU_A/MEMB#3:ANALYZE:MAC detected clock fatal failure

    Dec 22 10:18:56 Hos2mdev-xscf0 Alarm: /MBU_A:SCF:SC test error

    Dec 22 10:18:57 Hos2mdev-xscf0 Alarm: /MBU_A:SCF:SC test error

    Dec 22 10:18:58 Hos2mdev-xscf0 monitor_msg: SCF:System stopped (no available XSB)

    Dec 22 10:19:01 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0 state change (Powered off, detail#8)

    Dec 22 10:19:03 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 1 state change (Powered off, detail#8)

    Dec 22 10:19:57 Hos2mdev-xscf0 monitor_msg: SCF:System powered off

    Dec 22 10:50:35 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: XSB#00-0 is unassigned (deleteboard)

    Dec 22 10:50:43 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 1: XSB#00-1 is unassigned (deleteboard)

    Dec 22 10:50:55 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: XSB#00-2 is unassigned (deleteboard)

    Dec 22 10:51:01 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 1: XSB#00-3 is unassigned (deleteboard)

    Dec 22 10:55:55 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-0

    Dec 22 10:55:55 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-1

    Dec 22 10:55:55 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-2

    Dec 22 10:55:55 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-3

    Dec 22 10:55:55 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-0

    Dec 22 10:55:55 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-1

    Dec 22 10:55:55 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-2

    Dec 22 10:55:56 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-3

    Dec 22 11:48:05 Hos2mdev-xscf0 monitor_msg: SCF:SB configuration changed (uni-XSB mode)

    Dec 22 11:48:07 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-0

    Dec 22 11:48:07 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-0

    Dec 22 12:05:49 Hos2mdev-xscf0 monitor_msg: SCF:SB configuration changed (quad-XSB mode)

    Dec 22 12:05:50 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-0

    Dec 22 12:05:51 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-1

    Dec 22 12:05:51 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-2

    Dec 22 12:05:51 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-3

    Dec 22 12:05:51 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-0

    Dec 22 12:05:51 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-1

    Dec 22 12:05:51 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-2

    Dec 22 12:05:51 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-3

    Dec 22 12:06:36 Hos2mdev-xscf0 monitor_msg: SCF:DCL setting changed (LSB nr. assignment)

    Dec 22 12:06:36 Hos2mdev-xscf0 monitor_msg: SCF:DCL setting changed (LSB nr. assignment)

    Dec 22 12:06:50 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: XSB#00-0 is assigned (addboard)

    Dec 22 12:06:54 Hos2mdev-xscf0 monitor_msg: SCF:DomainID 0: XSB#00-2 is assigned (addboard)

    Dec 22 12:24:10 Hos2mdev-xscf0 monitor_msg: SCF:Power failure (/PSU#0)

    Dec 22 12:29:56 Hos2mdev-xscf0 monitor_msg: SCF:XSCF ready

    Dec 22 12:30:13 Hos2mdev-xscf0 monitor_msg: SCF:XSCFU was stopped by power failure. Power failure date is 2019/12/22 12:24:15

    Dec 22 12:30:13 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-3

    Dec 22 13:02:11 Hos2mdev-xscf0 monitor_msg: SCF:XCP update is started (XCP version=1123:last version=1100)

    Dec 22 13:02:42 Hos2mdev-xscf0 monitor_msg: SCF:OpenBoot PROM download is started (OpenBoot PROM version=02320000, bank0=00000000 00000000, bank1=00000000 0000000f)

    Dec 22 13:04:32 Hos2mdev-xscf0 monitor_msg: SCF:OpenBoot PROM download has been completed (OpenBoot PROM version=02320000, bank0=00000000 00000000, bank1=00000000 0000000f)

    Dec 22 13:04:42 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=00, version=01120001:last version=01090003)

    Dec 22 13:05:21 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=00, version=01120001:last version=01090003)

    Dec 22 13:05:35 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=01, version=01120003:last version=01100000)

    Dec 22 13:07:56 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=01, version=01120003:last version=01100000)

    Dec 22 13:08:05 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=02, version=01100001:last version=01080001)

    Dec 22 13:08:21 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=02, version=01100001:last version=01080001)

    Dec 22 13:08:55 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=03, version=01120003:last version=01100000)

    Dec 22 13:09:43 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=03, version=01120003:last version=01100000)

    Dec 22 13:10:09 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=04, version=01120003:last version=01100000)

    Dec 22 13:10:49 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=04, version=01120003:last version=01100000)

    Dec 22 13:11:04 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=05, version=01110004:last version=01100000)

    Dec 22 13:11:17 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=05, version=01110004:last version=01100000)

    Dec 22 13:11:33 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=07, version=01120000:last version=01090001)

    Dec 22 13:11:34 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100, Firmware Element ID=07, version=01120000:last version=01090001)

    Dec 22 13:11:34 Hos2mdev-xscf0 monitor_msg: SCF:XSCF bank apply has been completed (XSCFU=0, bank=1, XCP version=1123:last version=1100)

    Dec 22 13:16:01 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=00, version=01120001:last version=01090003)

    Dec 22 13:16:19 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-0

    Dec 22 13:16:19 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-1

    Dec 22 13:16:19 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-2

    Dec 22 13:16:20 Hos2mdev-xscf0 monitor_msg: SCF:no CPU on XSB#00-3

    Dec 22 13:16:20 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-0

    Dec 22 13:16:21 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-1

    Dec 22 13:16:21 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-2

    Dec 22 13:16:21 Hos2mdev-xscf0 monitor_msg: SCF:no MEM on XSB#00-3

    Dec 22 13:16:32 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=00, version=01120001:last version=01090003)

    Dec 22 13:16:45 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=01, version=01120003:last version=01100000)

    Dec 22 13:18:24 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=01, version=01120003:last version=01100000)

    Dec 22 13:18:34 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=02, version=01100001:last version=01080001)

    Dec 22 13:18:43 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=02, version=01100001:last version=01080001)

    Dec 22 13:19:09 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=03, version=01120003:last version=01100000)

    Dec 22 13:19:54 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=03, version=01120003:last version=01100000)

    Dec 22 13:20:26 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=04, version=01120003:last version=01100000)

    Dec 22 13:21:16 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=04, version=01120003:last version=01100000)

    Dec 22 13:21:37 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=05, version=01110004:last version=01100000)

    Dec 22 13:21:50 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=05, version=01110004:last version=01100000)

    Dec 22 13:22:07 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download is started (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=07, version=01120000:last version=01090001)

    Dec 22 13:22:09 Hos2mdev-xscf0 monitor_msg: SCF:XSCF download has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100, Firmware Element ID=07, version=01120000:last version=01090001)

    Dec 22 13:22:09 Hos2mdev-xscf0 monitor_msg: SCF:XSCF bank apply has been completed (XSCFU=0, bank=0, XCP version=1123:last version=1100)

    Dec 22 13:22:10 Hos2mdev-xscf0 monitor_msg: SCF:XCP update has been completed (XCP version=1123)

    XSCF>

  • Nik
    Nik Blocked Member Posts: 2,879 Bronze Crown
    edited Dec 23, 2019 1:05AM

    Hi.

    You are update FW after initial test.

    Disconnect power cables, connect it again and  try swith on domain again.

    System mark MEMB#3 as faulted, but at this moment it's look like IO-Module faulted.

    Regards,

    Nik

  • User_1WIX6
    User_1WIX6 Member Posts: 8 Red Ribbon
    edited Dec 23, 2019 2:44AM

    Dear Nik,

    Please have a look below log post disconnect power cable.

    XSCF> showstatus

    *   MBU_A Status:Faulted;

    *       CPUM#0-CHIP#0 Status:Deconfigured;

    *       CPUM#0-CHIP#1 Status:Deconfigured;

    *       CPUM#1-CHIP#0 Status:Deconfigured;

    *       CPUM#1-CHIP#1 Status:Deconfigured;

    *       MEMB#0 Status:Deconfigured;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       MEMB#1 Status:Deconfigured;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       MEMB#2 Status:Deconfigured;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       MEMB#3 Status:Faulted;

    *           MEM#0A Status:Deconfigured;

    *           MEM#0B Status:Deconfigured;

    *           MEM#1A Status:Deconfigured;

    *           MEM#1B Status:Deconfigured;

    *           MEM#2A Status:Deconfigured;

    *           MEM#2B Status:Deconfigured;

    *           MEM#3A Status:Deconfigured;

    *           MEM#3B Status:Deconfigured;

    *       DDC_A#0 Status:Deconfigured;

    *       DDC_A#1 Status:Deconfigured;

    *       DDC_B#0 Status:Deconfigured;

    *   IOU#0 Status:Deconfigured;

    *       DDC_A#0 Status:Deconfigured;

    *       DDCR Status:Deconfigured;

    *           DDC_B#0 Status:Deconfigured;

    showlog power

    Dec 22 10:55:16 +03 2019      SCF Reset        Self Reset     --   Locked

    Dec 22 12:29:56 +03 2019      SCF Reset        Power On       --   Locked

    Dec 22 13:15:39 +03 2019      SCF Reset        Self Reset     --   Locked

    Dec 23 08:46:14 +03 2019      SCF Reset        Power On       --   Locked

    XSCF>

    XSCF> showdomainstatus -a

    DID         Domain Status

    00          Powered Off

    01          -

    XSCF> poweron -a

    DomainIDs to power on:00

    Continue? [y|n] :y

    00 :Not powering on :Poweron canceled due to missing component.

    XSCF>

  • Nik
    Nik Blocked Member Posts: 2,879 Bronze Crown
    edited Dec 23, 2019 4:02AM

    Hi.

      At this moment System board ( MBU_A )  marked  as faulted. So you can not power on server.

    You can try use fmdumpv -Ve  for identify faulted components and   command  clearfault for clear state faulted.

    But  for clearfault on some components required special service password.  You can not got it without service contract.

    https://docs.oracle.com/cd/E19580-01/819-2210-14/819-2210-14.pdf  (page 47)

    May be fmadm repair  can clear faulted state.

    Regards,  

      Nik

    User_1WIX6