Forum Stats

  • 3,769,230 Users
  • 2,252,933 Discussions
  • 7,874,951 Comments

Discussions

PSM-LSM-05008 & PSM-LCM-07102

Mohamed Ali Dheifallah
Mohamed Ali Dheifallah Member Posts: 2
edited Jun 29, 2020 9:49AM in SOA Suite Discusssions

Hello Folks,

we encounter this issue with an SOA instance

log

YYYY/MM/DD hh:mm:ss UTC Activity Submitted

YYYY/MM/DD hh:mm:ss UTC Activity Started

YYYY/MM/DD hh:mm:ss UTC Started operation to [start] node(s) of service [XXXXXXXXXXX] in identity domain [XXXXXXXXXXX].

YYYY/MM/DD hh:mm:ss UTC Started operation to [start] the compute resources for the VMs.

YYYY/MM/DD hh:mm:ss UTC Successfully completed the operation to [start] the compute resources for the VMs.

YYYY/MM/DD hh:mm:ss UTC PSM-LSM-05008 Unable to start remote execution of service operation. One or more service nodes may be inaccessible. Check that service node(s) are accessible.

YYYY/MM/DD hh:mm:ss UTC PSM-LCM-07102 Service node(s) were successfully started, but the service has reported a problem with service start up. Check the error reported from service start action and resolve the problem. You may need to run service restart when the problem is resolved.

YYYY/MM/DD hh:mm:ss UTC Activity Ended

this issue is described here :

https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=9239813904319&id=2502451.1&_afrWindowMode=0&_adf.ctrl-state=y8i078za4_119

Tagged:

Best Answer

  • Mohamed Ali Dheifallah
    Mohamed Ali Dheifallah Member Posts: 2
    edited Jun 29, 2020 9:49AM Accepted Answer

    this was an issue of iscsi-initiator-utils.x86_64 0:6.2.0.873-27.0.3.el6_9, upgraded to iscsi-initiator-utils.x86_64 0:6.2.0.873-27.0.11.el6_10 and then the instance was able to start.

    for record boot error was :

    scsistart: Connection1:0 to [target: iqn.2015-02.oracle.boot:uefi, portal: 169.254.0.2,3260] through [iface: default] is operational now[   18.383605] scsi 2:0:0:0: RAID              IET      Controller       0001 PQ: 0 ANSI: 5[   18.388143] scsi 2:0:0:1: Direct-Access     ORACLE   BlockVolume      1.0  PQ: 0 ANSI: 6[   18.397683] sd 2:0:0:1: [sda] 97677312 512-byte logical blocks: (50.0 GB/46.5 GiB)[   18.401121] sd 2:0:0:1: [sda] 4096-byte physical blocks[   18.404665] sd 2:0:0:1: [sda] Write Protect is off[   18.407802] sd 2:0:0:1: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA[   18.416981]  sda: sda1 sda2 sda3[   18.420576] sd 2:0:0:1: [sda] Attached SCSI disk[   18.632996] EXT4-fs (sda3): INFO: recovery required on readonly filesystem[   18.636436] EXT4-fs (sda3): write access will be enabled during recovery[   18.643837] EXT4-fs (sda3): recovery complete[   18.646783] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)[   18.664737] dracut: Remounting /dev/disk/by-uuid/67030e9e-dc15-44a8-9ef7-53c87262a9d8 with -o _netdev,_rnetdev,ro[   18.676999] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)[   18.682332] dracut: Mounted root filesystem /dev/sda3[   18.743137] SELinux:  Disabled at runtime.[   18.770083] audit: type=1404 audit(1593178451.545:2): selinux=0 auid=4294967295 ses=4294967295[   18.777438] dracut: [   18.834235] dracut: Switching root[   18.867323] random: nonblocking pool is initializedmount: mount point /proc/bus/usb does not existWelcome to Oracle Linux ServerStarting udev: [   19.134718] udev: starting version 147[   19.189497] WARNING! power/level is deprecated; use power/control instead[   19.372331] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0[   19.488404] input: PC Speaker as /devices/platform/pcspkr/input/input5[   19.749776] scsi 2:0:0:0: Attached scsi generic sg0 type 12[   19.904251] sd 2:0:0:1: Attached scsi generic sg1 type 0[   20.811138] ppdev: user-space parallel port driver[  OK  ][   66.848296]  connection1:0: detected conn error (1021)

Answers

  • Mohamed Ali Dheifallah
    Mohamed Ali Dheifallah Member Posts: 2
    edited Jun 29, 2020 9:49AM Accepted Answer

    this was an issue of iscsi-initiator-utils.x86_64 0:6.2.0.873-27.0.3.el6_9, upgraded to iscsi-initiator-utils.x86_64 0:6.2.0.873-27.0.11.el6_10 and then the instance was able to start.

    for record boot error was :

    scsistart: Connection1:0 to [target: iqn.2015-02.oracle.boot:uefi, portal: 169.254.0.2,3260] through [iface: default] is operational now[   18.383605] scsi 2:0:0:0: RAID              IET      Controller       0001 PQ: 0 ANSI: 5[   18.388143] scsi 2:0:0:1: Direct-Access     ORACLE   BlockVolume      1.0  PQ: 0 ANSI: 6[   18.397683] sd 2:0:0:1: [sda] 97677312 512-byte logical blocks: (50.0 GB/46.5 GiB)[   18.401121] sd 2:0:0:1: [sda] 4096-byte physical blocks[   18.404665] sd 2:0:0:1: [sda] Write Protect is off[   18.407802] sd 2:0:0:1: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA[   18.416981]  sda: sda1 sda2 sda3[   18.420576] sd 2:0:0:1: [sda] Attached SCSI disk[   18.632996] EXT4-fs (sda3): INFO: recovery required on readonly filesystem[   18.636436] EXT4-fs (sda3): write access will be enabled during recovery[   18.643837] EXT4-fs (sda3): recovery complete[   18.646783] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)[   18.664737] dracut: Remounting /dev/disk/by-uuid/67030e9e-dc15-44a8-9ef7-53c87262a9d8 with -o _netdev,_rnetdev,ro[   18.676999] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)[   18.682332] dracut: Mounted root filesystem /dev/sda3[   18.743137] SELinux:  Disabled at runtime.[   18.770083] audit: type=1404 audit(1593178451.545:2): selinux=0 auid=4294967295 ses=4294967295[   18.777438] dracut: [   18.834235] dracut: Switching root[   18.867323] random: nonblocking pool is initializedmount: mount point /proc/bus/usb does not existWelcome to Oracle Linux ServerStarting udev: [   19.134718] udev: starting version 147[   19.189497] WARNING! power/level is deprecated; use power/control instead[   19.372331] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0[   19.488404] input: PC Speaker as /devices/platform/pcspkr/input/input5[   19.749776] scsi 2:0:0:0: Attached scsi generic sg0 type 12[   19.904251] sd 2:0:0:1: Attached scsi generic sg1 type 0[   20.811138] ppdev: user-space parallel port driver[  OK  ][   66.848296]  connection1:0: detected conn error (1021)