Forum Stats

  • 3,722,386 Users
  • 2,244,298 Discussions
  • 7,849,820 Comments

Discussions

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Oracle linux KVM OL7.7: how to change Network source in Virtual Network Interface

Kshitij Uchil-Oracle
Kshitij Uchil-Oracle Member Posts: 4 Employee

Hi Team,


While selecting the interface for the Guest VM i am not able to see bond0 option for Bridge imi and xmi except for Bridge int as below, is it possible to modify it to Bridge xmi: Host device bond0.3000 like the one in the last snippet, also I adding the config done for reference. Also ihave another setup with same config and there its is showing well like the last snippet

Config for above interface:

[[email protected] network-scripts]# cat ifcfg-bond0.3000

DEVICE=bond0.3000

TYPE=Ethernet

ONBOOT=yes

NM_CONTROLLED=no

BOOTPROTO=none

VLAN=yes

BRIDGE=xmi

[[email protected] network-scripts]# cat ifcfg-xmi

DEVICE=xmi

TYPE=Bridge

ONBOOT=yes

NM_CONTROLLED=no

BOOTPROTO=none

IPADDR=10.5.28.6

NETMASK=255.255.255.224

NETWORK=10.5.28.0

GATEWAY=10.5.28.1

BRIDGE_INTERFACES=bond0.3000



bridge name   bridge id        STP enabled   interfaces

imi       8000.f40343dac680    no       bond0.3001

                            vnet5

int       8000.f40343dac680    no       bond0.3006

                            vnet0

                            vnet2

                            vnet4

virbr0     8000.5254007e5833    yes       virbr0-nic

xmi       8000.f40343dac680    no       bond0.3000

                            vnet1

                            vnet3

                            vnet6


Working interface snippet:


Thank You,

Kshitij

Tagged:
Sign In or Register to comment.