Forum Stats

  • 3,815,589 Users
  • 2,259,055 Discussions


how to zimbra mail...

soon pyo,jeong
soon pyo,jeong Member Posts: 5
used zimbra mail..
error message is " This is an automatically generated Delivery Status Notification"



  • snmdla
    snmdla Member Posts: 490
    Hi "ANDSOME",

    I think you need to go into the details of the DSN, which can be viewed in the attachments.
    My impression is that Beehive is quite "terse" with its DSNs.

    Regards, Thomas
  • The first installation is it possible to send mail?
    Do you have any other settings?

    Beekeeper's mail service on the error.

    <ATTR NAME="bee_compid">2c25b060-9071-4df1-b0c4-c368ea386eae</ATTR>
    <ATTR NAME="bee_compname">EmailService</ATTR>
    <SUPPL_DETAIL><![CDATA[{{address{address=null} {port=25} {interface-group=} {flags=2} {local-port=0}}} java.lang.Exception: Failed To Register Port (port: 25 error: 102)
    at oracle.ocs.omb.transport.tcprouter.BPConnectionHolder.processPortOpened(
    at oracle.ocs.omb.transport.tcprouter.BPConnectionHolder.access$900(
    at oracle.ocs.omb.transport.tcprouter.BPConnectionHolder$14.processData(
    at oracle.ocs.omb.transport.conn.BPReadStream.onDataRead(
    at oracle.ocs.omb.transport.conn.BPReadStream.receiveData(
    at oracle.ocs.omb.transport.conn.BPConnection.processSend(
    at oracle.ocs.omb.transport.conn.BPConnection.processData(
    at oracle.ocs.omb.transport.socket.BIOSocketDriver.onDataRead(
    at oracle.ocs.omb.transport.socket.BIOSocketDriver.doRead(
    at oracle.ocs.omb.transport.socket.SocketDriver$1SelectObject.onCompleted(
    at oracle.ocs.omb.messaging.ConnectionFactory$

  • Richard Hall-Oracle
    Richard Hall-Oracle Member Posts: 128 Employee
    Beehive is complaining about being unable to start a process and listen on port 25, which is used for mail delivery (SMTP).

    Do you have anything else running on port 25, like sendmail? (you shouldn't).
    Did you run through the post-install steps, like setuid on hasbind and configuring /etc/cap.ora etc.? (you should)

    let us know.

  • SENDMAIL that is currently suspended.

    [[email protected] etc]# netstat -an|grep :25
    tcp 0 0 ESTABLISHED
    tcp 0 0 ESTABLISHED
    tcp 0 0 ESTABLISHED
    tcp 0 0 ESTABLISHED
    tcp 0 0 ESTABLISHED
    tcp 0 0 ::ffff: ::ffff: ESTABLISHED
    tcp 0 0 ::ffff: ::ffff: ESTABLISHED
    tcp 0 0 ::ffff: ::ffff: ESTABLISHED
    tcp 0 0 ::ffff: ::ffff: ESTABLISHED
    tcp 0 0 ::ffff: ::ffff: ESTABLISHED

    [[email protected] etc]# nmap -v localhost

    Starting nmap 3.70 ( ) at 2010-01-27 15:34 KST
    Initiating SYN Stealth Scan against localhost.localdomain ( [1660 ports] at 15:34
    Discovered open port 113/tcp on
    Discovered open port 22/tcp on
    Discovered open port 21/tcp on
    Discovered open port 6101/tcp on
    Discovered open port 6003/tcp on
    Discovered open port 111/tcp on
    Discovered open port 631/tcp on
    Discovered open port 836/tcp on
    Discovered open port 2121/tcp on
    Discovered open port 7200/tcp on
    The SYN Stealth Scan took 0.14s to scan 1660 total ports.
    Host localhost.localdomain ( appears to be up ... good.
    Interesting ports on localhost.localdomain (
    (The 1650 ports scanned but not shown below are in state: closed)
    21/tcp open ftp
    22/tcp open ssh
    111/tcp open rpcbind
    113/tcp open auth
    631/tcp open ipp
    836/tcp open unknown
    2121/tcp open ccproxy-ftp
    6003/tcp open X11:3
    6101/tcp open VeritasBackupExec
    7200/tcp open fodms
  • [[email protected] bin]# vi /etc/cap.ora

    +user instuser: bind port 80


    How do I set the uid? ...
  • snmdla
    snmdla Member Posts: 490
    you need to choose the uid of the sw owner of beehive, so, if the sw is installed as user beehive, cap.ora should read

    +user beehive: bind port 80

    Regards, Thomas
  • Richard Hall-Oracle
    Richard Hall-Oracle Member Posts: 128 Employee
    Take another look through the post install steps, here .
    Specifically refer to the section "Changing other ports".

  • my action is
    Changing HTTP Port Change Complete

    Changing Other Ports
    --> +user oraprod: bind port 80

    3 bays occur fail

    OBS:/u01/oraprod]beectl modify_property component name ClientPort --value 8000

    beectl command failed. See the log file "/u01/oraprod/oracle/product/" for more details.
    This config object does not have a property named ClientPort
This discussion has been closed.