Forum Stats

  • 3,815,595 Users
  • 2,259,055 Discussions
  • 7,893,182 Comments

Discussions

Categories

how to zimbra mail...

soon pyo,jeong
soon pyo,jeong Member Posts: 5
edited Feb 7, 2020 2:22PM in E-mail, Calendar, & Collaboration
used zimbra mail..
error message is " This is an automatically generated Delivery Status Notification"

why?.....
· Share on TwitterShare on Facebook

Answers

  • snmdla
    snmdla Member Posts: 490
    Hi "ANDSOME",

    I think you need to go into the details of the DSN, which can be viewed in the attachments.
    My impression is that Beehive is quite "terse" with its DSNs.

    Regards, Thomas
    · Share on TwitterShare on Facebook
  • soon pyo,jeong
    soon pyo,jeong Member Posts: 5
    The first installation is it possible to send mail?
    Do you have any other settings?

    Beekeeper's mail service on the error.

    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2010-01-25T16:14:00.505+09:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>beehive</COMPONENT_ID>
    <MSG_TYPE TYPE="WARNING"></MSG_TYPE>
    <MSG_LEVEL>1</MSG_LEVEL>
    <MODULE_ID>omb.transport.aio.impl.BPCommSession</MODULE_ID>
    <THREAD_ID>40</THREAD_ID>
    <SUPPL_ATTRS>
    <ATTR NAME="bee_compid">2c25b060-9071-4df1-b0c4-c368ea386eae</ATTR>
    <ATTR NAME="bee_compname">EmailService</ATTR>
    </SUPPL_ATTRS>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>192.168.0.51:3676:1264403639917:112</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>bp-comm-mx-tcp-listen-failed</MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[{{address{address=null} {port=25} {interface-group=} {flags=2} {local-port=0}}} java.lang.Exception: Failed To Register Port (port: 25 BP:mail.valuechain.co.kr/192.168.0.51:21300-0x1000b error: 102)
    at oracle.ocs.omb.transport.tcprouter.BPConnectionHolder.processPortOpened(BPConnectionHolder.java:837)
    at oracle.ocs.omb.transport.tcprouter.BPConnectionHolder.access$900(BPConnectionHolder.java:40)
    at oracle.ocs.omb.transport.tcprouter.BPConnectionHolder$14.processData(BPConnectionHolder.java:585)
    at oracle.ocs.omb.transport.conn.BPReadStream.onDataRead(BPReadStream.java:292)
    at oracle.ocs.omb.transport.conn.BPReadStream.receiveData(BPReadStream.java:267)
    at oracle.ocs.omb.transport.conn.BPConnection.processSend(BPConnection.java:1771)
    at oracle.ocs.omb.transport.conn.BPConnection.processData(BPConnection.java:1288)
    at oracle.ocs.omb.transport.socket.BIOSocketDriver.onDataRead(BIOSocketDriver.java:763)
    at oracle.ocs.omb.transport.socket.BIOSocketDriver.doRead(BIOSocketDriver.java:804)
    at oracle.ocs.omb.transport.socket.SocketDriver$1SelectObject.onCompleted(SocketDriver.java:75)
    at oracle.ocs.omb.lib.SelectScheduler.work(SelectScheduler.java:226)
    at oracle.ocs.omb.messaging.ConnectionFactory$SelectThread.run(ConnectionFactory.java:649)


    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    · Share on TwitterShare on Facebook
  • Richard Hall-Oracle
    Richard Hall-Oracle Member Posts: 128 Employee
    Beehive is complaining about being unable to start a process and listen on port 25, which is used for mail delivery (SMTP).

    Do you have anything else running on port 25, like sendmail? (you shouldn't).
    Did you run through the post-install steps, like setuid on hasbind and configuring /etc/cap.ora etc.? (you should)

    let us know.

    regards,
    Richard
    · Share on TwitterShare on Facebook
  • soon pyo,jeong
    soon pyo,jeong Member Posts: 5
    SENDMAIL that is currently suspended.

    [[email protected] etc]# netstat -an|grep :25
    tcp 0 0 192.168.0.51:25250 192.168.0.51:12403 ESTABLISHED
    tcp 0 0 192.168.0.51:25252 192.168.0.51:12403 ESTABLISHED
    tcp 0 0 192.168.0.51:25334 192.168.0.51:12404 ESTABLISHED
    tcp 0 0 192.168.0.51:25335 192.168.0.51:12404 ESTABLISHED
    tcp 0 0 192.168.0.51:25049 192.168.0.51:12505 ESTABLISHED
    tcp 0 0 ::ffff:192.168.0.51:12403 ::ffff:192.168.0.51:25250 ESTABLISHED
    tcp 0 0 ::ffff:192.168.0.51:12403 ::ffff:192.168.0.51:25252 ESTABLISHED
    tcp 0 0 ::ffff:192.168.0.51:12404 ::ffff:192.168.0.51:25334 ESTABLISHED
    tcp 0 0 ::ffff:192.168.0.51:12404 ::ffff:192.168.0.51:25335 ESTABLISHED
    tcp 0 0 ::ffff:192.168.0.51:12505 ::ffff:192.168.0.51:25049 ESTABLISHED

    [[email protected] etc]# nmap -v localhost

    Starting nmap 3.70 ( http://www.insecure.org/nmap/ ) at 2010-01-27 15:34 KST
    Initiating SYN Stealth Scan against localhost.localdomain (127.0.0.1) [1660 ports] at 15:34
    Discovered open port 113/tcp on 127.0.0.1
    Discovered open port 22/tcp on 127.0.0.1
    Discovered open port 21/tcp on 127.0.0.1
    Discovered open port 6101/tcp on 127.0.0.1
    Discovered open port 6003/tcp on 127.0.0.1
    Discovered open port 111/tcp on 127.0.0.1
    Discovered open port 631/tcp on 127.0.0.1
    Discovered open port 836/tcp on 127.0.0.1
    Discovered open port 2121/tcp on 127.0.0.1
    Discovered open port 7200/tcp on 127.0.0.1
    The SYN Stealth Scan took 0.14s to scan 1660 total ports.
    Host localhost.localdomain (127.0.0.1) appears to be up ... good.
    Interesting ports on localhost.localdomain (127.0.0.1):
    (The 1650 ports scanned but not shown below are in state: closed)
    PORT STATE SERVICE
    21/tcp open ftp
    22/tcp open ssh
    111/tcp open rpcbind
    113/tcp open auth
    631/tcp open ipp
    836/tcp open unknown
    2121/tcp open ccproxy-ftp
    6003/tcp open X11:3
    6101/tcp open VeritasBackupExec
    7200/tcp open fodms
    · Share on TwitterShare on Facebook
  • soon pyo,jeong
    soon pyo,jeong Member Posts: 5
    [[email protected] bin]# vi /etc/cap.ora

    +user instuser: bind port 80


    ???....

    How do I set the uid? ...
    · Share on TwitterShare on Facebook
  • snmdla
    snmdla Member Posts: 490
    you need to choose the uid of the sw owner of beehive, so, if the sw is installed as user beehive, cap.ora should read

    +user beehive: bind port 80

    Regards, Thomas
    · Share on TwitterShare on Facebook
  • Richard Hall-Oracle
    Richard Hall-Oracle Member Posts: 128 Employee
    Take another look through the post install steps, here .
    Specifically refer to the section "Changing other ports".

    richard
    · Share on TwitterShare on Facebook
  • soon pyo,jeong
    soon pyo,jeong Member Posts: 5
    my action is
    -------------------------------------------------------------------------------------------
    Changing HTTP Port Change Complete



    Changing Other Ports
    --> +user oraprod: bind port 80


    3 bays occur fail


    OBS:/u01/oraprod]beectl modify_property component BTI_OBS.mail.valuechain.co.kr name ClientPort --value 8000

    beectl command failed. See the log file "/u01/oraprod/oracle/product/1.5.1.0.0/beehive_1/beehive/logs/beectl/2010.01.28/beectl_modify_property_09_25_47+0900.txt" for more details.
    This config object does not have a property named ClientPort
    · Share on TwitterShare on Facebook
This discussion has been closed.