Status: INS value not supported

User_IDK9F

I am new to simulation tool JCOP

I installed JCOP tool on my Windows 10 64 bit machine.

Connected reader 5422 CL, put the mobile and reader for transaction payment tried to run the script specific to card

/C:/Dhawal/Projects/CPS/DGV_Upgrade/scripts/visa-lvt

visa-lvt as below

/term PCSC

/atr -t 1

/echo

/send "00a404000e325041592e5359532e444446303100"

/send "00a4040007A000000003101000"

/send "80A8000023832120000000000000000010000000000000084000000000000840151210011A2E33C400"

/send "00B2030C00"

But getting error as given below, could you please provide me the resolution for this error.

-Opening terminal

resetCard with timeout: 1000 (ms)

--Waiting for card...

ATR=3B FE 18 00 00 80 31 FE 45 53 43 45 36 30 2D 43  ;.....1.ESCE60-C

  44 30 38 31 2D 6E 46 A9              D081-nF.

 IOCTL().

ATR:

     T = 0

     T = 1

 => 00 A4 04 00 0E 32 50 41 59 2E 53 59 53 2E 44 44  .....2PAY.SYS.DD

  46 30 31 00                    F01.

 (8102 usec)

 <= 6A 82                       j.

Status: File not found

 => 00 A4 04 00 07 A0 00 00 00 03 10 10 00       .............

 (7590 usec)

 <= 6A 82                       j.

Status: File not found

 => 80 A8 00 00 23 83 21 20 00 00 00 00 00 00 00 00  ....#.! ........

  10 00 00 00 00 00 00 08 40 00 00 00 00 00 08 40  [email protected]@

  15 12 10 01 1A 2E 33 C4 00             ......3..

 (9983 usec)

 <= 6D 00                       m.

Status: INS value not supported

 => 00 B2 03 0C 00                   .....

 (5272 usec)

 <= 6D 00                       m.

Status: INS value not supported

> /C:/Dhawal/Projects/CPS/DGV_Upgrade/scripts/visa-lvt

--Opening terminal

resetCard with timeout: 1000 (ms)

--Waiting for card...

ATR=3B FE 18 00 00 80 31 FE 45 53 43 45 36 30 2D 43  ;.....1.ESCE60-C

  44 30 38 31 2D 6E 46 A9              D081-nF.

 IOCTL().

ATR:

     T = 0

     T = 1

 => 00 A4 04 00 0E 32 50 41 59 2E 53 59 53 2E 44 44  .....2PAY.SYS.DD

  46 30 31 00                    F01.

 (8250 usec)

 <= 6A 82                       j.

Status: File not found

 => 00 A4 04 00 07 A0 00 00 00 03 10 10 00       .............

 (7490 usec)

 <= 6A 82                       j.

Status: File not found

 => 80 A8 00 00 23 83 21 20 00 00 00 00 00 00 00 00  ....#.! ........

  10 00 00 00 00 00 00 08 40 00 00 00 00 00 08 40  [email protected]@

  15 12 10 01 1A 2E 33 C4 00             ......3..

 (10168 usec)

 <= 6D 00                       m.

Status: INS value not supported

 => 00 B2 03 0C 00                   .....

 (5355 usec)

 <= 6D 00                       m.

Status: INS value not supported

>

User_B9BBH

Well, the ATR you're getting back seems to indicate that the card you're using is probably a generic G&D SmartCafe Expert 6.0. But you appear to be trying to access an EMV application. The select command (the first /send) is returning a not found error indicating the the AID you used is not selectable on the card.

https://stackoverflow.com/questions/15059580/reading-emv-card-using-ppse-and-not-pse indicates that the 2PAY.SYS.DD is the AID for the contactless interface of the EMV application and that 1PAY.SYS.DD might be the right choice for the contact interface.

In any event, if this is a generic Javacard, you may not actually have the application installed.