Forum Stats

  • 3,872,137 Users
  • 2,266,392 Discussions
  • 7,911,062 Comments

Discussions

reimage oda X7-2M disk NVME slot 0 Failure

User_R5UB9
User_R5UB9 Member Posts: 4 Green Ribbon
edited Sep 30, 2022 10:01AM in General Database Discussions

hi all, Wish U have Good Day,

I have reimage My oda From Previous version 12.1 to 19

here step i do :

  1. Reimage with 19.13 iso BM
  2. configure firstnet
  3. Cleanup.pl -erase data ASM
  4. update GI and DB Repo 19.13
  5. rm GI and DB repo Zip on temporary
  6. create aplpliance
  7. when create apliance error found is Disk Group Failed
  8. After I check ILOM i see there was failure NVME Disk on SLOT 0

The Question is may i, Configure appliance with 1 disk Online ? because one of my disk failure

what should i choose for ASM configration when create apliance -> (FLEX,NORMAL,HIGH)

anyone can help me to understabd waht really happened ?


here some i attached - from odacli describe

System Version

---------------

19.13.0.0.0


System node Name

---------------

oak


Local System Version

---------------

19.13.0.0.0


Component                Installed Version  Available Version

---------------------------------------- -------------------- --------------------

OAK                    19.13.0.0.0      up-to-date


DCSCONTROLLER               19.13.0.0.0      up-to-date


DCSCLI                  19.13.0.0.0      up-to-date


DCSAGENT                 19.13.0.0.0      up-to-date


DCSADMIN                 19.13.0.0.0      up-to-date


OS                    7.9          up-to-date


ILOM                   5.0.2.24.r141466   up-to-date


BIOS                   41100500       up-to-date


SHARED CONTROLLER FIRMWARE        QDV1RE14       QDV1RF32


LOCAL DISK FIRMWARE            0121         up-to-date


SHARED DISK FIRMWARE           0121         up-to-date


HMP                    2.4.8.0.600      up-to-date

----------------------------------------------------------------------------------------------

when check header ASM show like this

[[email protected] ~]# /opt/oracle/oak/onecmd/cleanup.pl -checkHeader

INFO: Log file is /opt/oracle/oak/log/oak/cleanup/cleanup_2022-09-30_07-21-35.log


INFO: Log file is /opt/oracle/oak/log/oak/cleanup/dcsemu_diag_precleanup_2022-09-30_07-21-35.log


Command may take few seconds...

OS Disk        Disk Type  OAK Header  ASM Header(p1)    ASM Header(p2)

 /dev/nvme1n1      NVME    Erased     Erased       UnKnown

 /dev/SSD_QRMDSK_p1   QURM    Unused     Erased        Erased

 /dev/SSD_QRMDSK_p2   QURM    Unused     Erased        Erased

INFO: Log file is /opt/oracle/oak/log/oak/cleanup/cleanup_2022-09-30_07-21-35.log


----------------------------------------------------------------------------------------------

here i attached lblsk from storage disk perspective


NAME             MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT

sdb              8:16  0 447.1G 0 disk

├─sdb2             8:18  0  500M 0 part

│ └─md0            9:0  0  499M 0 raid1 /boot

├─sdb3             8:19  0 446.2G 0 part

│ └─md1            9:1  0  446G 0 raid1

│  ├─VolGroupSys-LogVolSwap 252:1  0  24G 0 lvm  [SWAP]

│  ├─VolGroupSys-LogVolDATA 252:4  0   1G 0 lvm

│  ├─VolGroupSys-LogVolOpt 252:2  0  30G 0 lvm  /opt

│  ├─VolGroupSys-LogVolRoot 252:0  0  30G 0 lvm  /

│  ├─VolGroupSys-LogVolRECO 252:5  0   1G 0 lvm

│  └─VolGroupSys-LogVolU01 252:3  0  40G 0 lvm  /u01

└─sdb1             8:17  0  500M 0 part

nvme1n1           259:0  0  5.8T 0 disk

sda              8:0  0 447.1G 0 disk

├─sda2             8:2  0  500M 0 part

│ └─md0            9:0  0  499M 0 raid1 /boot

├─sda3             8:3  0 446.2G 0 part

│ └─md1            9:1  0  446G 0 raid1

│  ├─VolGroupSys-LogVolSwap 252:1  0  24G 0 lvm  [SWAP]

│  ├─VolGroupSys-LogVolDATA 252:4  0   1G 0 lvm

│  ├─VolGroupSys-LogVolOpt 252:2  0  30G 0 lvm  /opt

│  ├─VolGroupSys-LogVolRoot 252:0  0  30G 0 lvm  /

│  ├─VolGroupSys-LogVolRECO 252:5  0   1G 0 lvm

│  └─VolGroupSys-LogVolU01 252:3  0  40G 0 lvm  /u01

└─sda1             8:1  0  500M 0 part /boot/efi