Skip to Main Content
Forums

SQL & PL/SQL

Announcement

For appeals, questions and feedback about Oracle Forums, please email oracle-forums-moderators_us@oracle.com. Technical questions should be asked in the appropriate category. Thank you!

Interested in getting your voice heard by members of the Developer Marketing team at Oracle? Check out this post for AppDev or this post for AI focus group information.

Code Review: Update polyline vertices with cumulative length of line

User_1871Mar 31 2022 — edited Jun 24 2022

image.pngI have a multi-part polyline in a row in an Oracle 18c table. The polyline's geometry information is stored in a SHAPE column; the datatype is a user-defined spatial type called SDE.ST_Geometry.
I've written a PL/SQL function call m_as_length() that replaces a coordinate in the polyline's vertices with the cumulative length of the line. The coordinate is called an "M" coordinate (aka a "Measure-value"). M coordinates are similar to X and Y coordinates, but are used for specialized linear referencing purposes.

Input:
MULTILINESTRING M (( 0.0 5.0 -100000.0, 10.0 10.0 -100000.0, 30.0 0.0 -100000.0),( 50.0 10.0 -100000.0, 60.0 10.0 -100000.0))
--select sde.st_astext(shape) from polylines

Output:
MULTILINESTRING M ((0 5 0, 10 10 11.18, 30 0 33.54),(50 10 33.54, 60 10 43.54))
--select m_as_length(shape) from polylines

Question:
I'm a novice when it comes to PL/SQL. Can the m_as_length() function be improved?

with
    function pythagoras(x1 in number, y1 in number, x2 in number, y2 in number) return number is
    begin
        return round(  sqrt(power(x2 - x1, 2) + power(y2 - y1, 2))  ,2);
    end;
   
    function m_as_length(shape in sde.st_geometry) return varchar2
    is
        result              varchar2(32767);
        vertex              varchar2(32767);
        vertex_set          varchar2(32767);
        i                   number;
        j                   number;
        num_parts           number;
        num_points          number;
        oldX                number;
        oldY                number;
        newX                number;
        newY                number;
        line_len            number;
    begin
        num_parts           := sde.st_geometry_operators.st_numgeometries_f(shape); 
        oldX                := sde.st_geometry_operators.st_x_f(sde.st_geometry_operators.st_startpoint_f(sde.st_geometry_operators.st_geometryN_f(shape,1)));
        oldY                := sde.st_geometry_operators.st_y_f(sde.st_geometry_operators.st_startpoint_f(sde.st_geometry_operators.st_geometryN_f(shape,1)));
        line_len            := 0;
       
        for i in 1..num_parts
        loop
            num_points      := sde.st_geometry_operators.st_numpoints_f(sde.st_geometry_operators.ST_GeometryN_f(shape,i));
            vertex_set      := null;
            for j in 1..num_points
            loop
                newX        := sde.st_geometry_operators.st_x_f(sde.st_geometry_operators.st_pointn_f(sde.st_geometry_operators.st_geometryn_f(shape,i),j));
                newY        := sde.st_geometry_operators.st_y_f(sde.st_geometry_operators.st_pointn_f(sde.st_geometry_operators.st_geometryn_f(shape,i),j));
                if j <> 1 then
                   line_len := line_len + pythagoras(oldX, oldY, newX, newY);
                end if;
                oldX        := newX;
                oldY        := newY;
                vertex      := newX || ' ' || newY || ' ' || line_len;
                vertex_set  := vertex_set || vertex || ', ';
            end loop;
            vertex_set      := '(' || rtrim((vertex_set),', ') || '),';
            result          := result || vertex_set;
        end loop;
        result              := 'MULTILINESTRING M (' || rtrim((result),',') || ')';
        return result;
    end;
select
    m_as_length(shape)
from
    polylines

Related:
Use SDE.ST_GEOMETRY functions in a custom function
Explains why the function calls are so verbose: sde.st_geometry_operators.st_numgeometries_f.
ST_GEOMETRY functions (links):
st_numgeometries
st_x
st_startpoint
st_geometryN
st_numpoints
st_pointn
I have a JavaScript expression that serves the same purpose (different use case). It's easier to read than the PL/SQL function.

Comments

Paulzip

It seems to me you'd be better off encapsulating such methods in a descendant object type, but anyway...
Code seems ok, but a couple of points :
Replace power(..), with a squaring multiplication. Power is great, has its place, but it's relatively slow.
You seem to be overly assigning everything to variables. Whilst that's good for instrumentation if you're outputting everything, it slows code down as values need to be loaded in registers, range and type checked and it makes code more verbose.
I think your code can be rewritten as this :

with
    function pythagoras(x1 in number, y1 in number, x2 in number, y2 in number) return number is
    begin
      return round(sqrt( (x2 - x1) * (x2 - x1) + (y2 - y1) * (y2 - y1)), 2);  -- Power is a slow function
    end;
   
    function m_as_length(shape in sde.st_geometry) return varchar2
    is
        result              varchar2(32767);
        vertex_set          varchar2(32767);
        oldX                number;
        oldY                number;
        newX                number;
        newY                number;
        line_len            number := 0;
    begin       
        for vPartIndex in 1..sde.st_geometry_operators.st_numgeometries_f(shape)
        loop
            vertex_set      := null;
            for vPointIndex in 1..sde.st_geometry_operators.st_numpoints_f(sde.st_geometry_operators.ST_GeometryN_f(shape,vPartIndex))
            loop
                newX        := sde.st_geometry_operators.st_x_f(sde.st_geometry_operators.st_pointn_f(sde.st_geometry_operators.st_geometryn_f(shape,vPartIndex),vPointIndex));
                newY        := sde.st_geometry_operators.st_y_f(sde.st_geometry_operators.st_pointn_f(sde.st_geometry_operators.st_geometryn_f(shape,vPartIndex),vPointIndex));
                if vPointIndex <> 1 then
                   line_len := line_len + pythagoras(oldX, oldY, newX, newY);
                end if;
                oldX        := newX;
                oldY        := newY;
                vertex_set  := vertex_set || newX || ' ' || newY || ' ' || line_len || ', ';
            end loop;
            result          := result || '(' || rtrim((vertex_set),', ') || '),';
        end loop;
        return 'MULTILINESTRING M (' || rtrim((result),',') || ')';
    end;
select
    m_as_length(shape)
from
    polylines
_jum

Have a look at the fine article"How to calculate cumulative length of a linestring" by The Spatial Database Advisor
How to calculate cumulative length of a linestring, or the truck tonnage that accumulates across a set of roads - The Spatial Database Advisor (0 Bytes)

User_1871

Paulzip Thanks! That helps. And of course, your revised function produces the correct result:

MULTILINESTRING M ((0 5 0, 10 10 11.18, 30 0 33.54),(50 10 33.54, 60 10 43.54))

Side question:
Regarding your comment "It seems to me you'd be better off encapsulating such methods in a descendant object type...". Is there any chance you could elaborate on that?
Related:
Link: More succinct SDE.ST_GEOMETRY function calls in PL/SQL
Link: ST_Geometry data type and its subclasses
Thanks again.

_jum

If you use (free) LRS-functions you can directly achieve the result:

SELECT SDO_LRS.CONVERT_TO_LRS_GEOM(
        SDO_CS.make_2d(
           SDO_UTIL.FROM_WKTGEOMETRY('MULTILINESTRING (( 0.0 5.0 -100000.0, 10.0 10.0 -100000.0, 30.0 0.0 -100000.0),( 50.0 10.0 -100000.0, 60.0 10.0 -100000.0))')
         )) lrsline 
   FROM dual;

{ "spatialdimension" : 2,
"geometrycollection" : {"geometries" :
 [{"line" : {"datapoints" : [[0,5,0],[10,10,11.180339887499],[30,0,33.5410196624969]]}},
  {"line" : {"datapoints" : [[50,10,33.5410196624969],[60,10,43.5410196624969]]}}]}
} 

Btw. if you code a function DETERMINISTIC clause could improve perfomance.

Paulzip

I don't have that spatial library installed, but can assume ST_GEOMETRY appears to be an object type. As such, you could inherit from it and add a method "m_as_length" to that object type.

User_1871

@jum3 Nice! That LRS-function solution is very simple. I like it.
Out of curiosity, how did you output the geometry to JSON? Just curious what technique you used...

_jum

Tested it with https://livesql.oracle.com

User_1871

Side note:
In my original function (and in Paulzip 's code review), we defined the variables as:

result       varchar2(32767);
vertex_set   varchar2(32767);

Alternatively, I suppose we could have defined those variables a CLOBs:

result       clob;
vertex_set   clob;
1 - 8

Post Details

Added on Mar 31 2022
#spatial
8 comments
507 views
2 mentions