Forum Stats

  • 3,839,017 Users
  • 2,262,438 Discussions
  • 7,900,836 Comments

Discussions

Categories

Cannot access http://127.0.0.1:8080/apex on Windows XP

706415
706415 Member Posts: 3
edited Aug 18, 2009 2:52PM in Oracle Database Express Edition (XE)
After installing oracle10gXE on windows XP, I am not able to access apex hitting http://127.0.0.1:8080/apex.
I tried the following:
- checked using netstat -a to see if other process was listening on 8080
- double check again using telnet localhost 8080
- verified that oracle was running
- re-installed oracle10Gxe
- lsnrctl status shows that the HTTP listener is not listening

LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 11-JUN-2009 10:04
:40

Copyright (c) 1991, 2005, Oracle. All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 11-JUN-2009 09:16:31
Uptime 0 days 0 hr. 48 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sysbios3.americas.hpqcorp.net)(PORT=
1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

What should I do next?
Thanks in advance for the help,
Eric
Tagged:
· Share on TwitterShare on Facebook
«13

Answers

  • SanjayRs
    SanjayRs Member Posts: 3,024 Silver Trophy
    By any chance do you have a firewall installed that is blocking the port.

    SS
    · Share on TwitterShare on Facebook
  • 706415
    706415 Member Posts: 3
    I am runnin Symantec End Point protection 11.0.2010.25:
    Logs does not show it has blocked the port 8080
    and I tried to setup Apache to listen to 8080 as troubleshooting step toward "firewall potential issue", and it worked.
    So I don't think my personnal firewall is in the way.
    · Share on TwitterShare on Facebook
  • 706415
    706415 Member Posts: 3
    looking at the logs after install I see this css.log uner C:\oraclexe\app\oracle\product\10.2.0\server\log\sysbios3\client

    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
    [ OCRUTL][8508]u_set_comp_error: Parameter was NULL
    [ OCRUTL][8508]u_set_ocr_error: Parameter was NULL
    2009-06-11 14:55:59.513: [ OCROSD][8508]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.

    [ OCRUTL][8508]u_set_gbl_comp_error: Parameter was NULL
    [ OCRUTL][8508]u_set_gbl_comp_error: Parameter was NULL
    2009-06-11 14:55:59.513: [ OCRRAW][8508]proprinit: Could not open raw device
    2009-06-11 14:55:59.513: [ default][8508]a_init:7!: Backend init unsuccessful : [33]
    [ OCRUTL][8508]u_set_ocr_error: Parameter was NULL
    2009-06-11 14:55:59.513: [ CSSCLNT][8508]clsssinit: error(33 ) in OCR initialization

    [ OCRUTL][8508]u_set_comp_error: Parameter was NULL
    [ OCRUTL][8508]u_set_ocr_error: Parameter was NULL
    2009-06-11 14:56:01.216: [ OCROSD][8508]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.

    [ OCRUTL][8508]u_set_gbl_comp_error: Parameter was NULL
    [ OCRUTL][8508]u_set_gbl_comp_error: Parameter was NULL
    2009-06-11 14:56:01.216: [ OCRRAW][8508]proprinit: Could not open raw device
    2009-06-11 14:56:01.216: [ default][8508]a_init:7!: Backend init unsuccessful : [33]
    [ OCRUTL][8508]u_set_ocr_error: Parameter was NULL
    2009-06-11 14:56:01.216: [ CSSCLNT][8508]clsssinit: error(33 ) in OCR initialization

    [ OCRUTL][4644]u_set_comp_error: Parameter was NULL
    [ OCRUTL][4644]u_set_ocr_error: Parameter was NULL
    2009-06-11 14:56:06.136: [ OCROSD][4644]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.

    [ OCRUTL][4644]u_set_gbl_comp_error: Parameter was NULL
    [ OCRUTL][4644]u_set_gbl_comp_error: Parameter was NULL
    2009-06-11 14:56:06.136: [ OCRRAW][4644]proprinit: Could not open raw device
    2009-06-11 14:56:06.136: [ default][4644]a_init:7!: Backend init unsuccessful : [33]
    [ OCRUTL][4644]u_set_ocr_error: Parameter was NULL
    2009-06-11 14:56:06.136: [ CSSCLNT][4644]clsssinit: error(33 ) in OCR initialization

    and I do see other logs: sqlnet.log is full of:

    ***********************************************************************
    Fatal NI connect error 12638, connecting to:
    (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))

    VERSION INFORMATION:
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
    Time: 11-JUN-2009 14:56:46
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12638
    TNS-12638: Credential retrieval failed
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0


    could this be related?
    Also I see that the install progress bar jump from 60% to the fisnish page, so I wonder if the install really succeded?
    Eric
    · Share on TwitterShare on Facebook
  • 713087
    713087 Member Posts: 2
    Did you ever get this resolved? I am having the same issue.
    · Share on TwitterShare on Facebook
  • Laurent.B
    Laurent.B Member Posts: 4
    edited Jul 22, 2009 5:22PM
    I had the same issue...

    After a reinstall of Oracle Database XE, the home page is finally working.

    If I take a look into the css.log file, I still have the mentioned errors above. Then, it seems there is no relation with the 8080 service issue.
    · Share on TwitterShare on Facebook
  • 714341
    714341 Member Posts: 5
    I have the same problem, reinstalling did not fix it. Any solutions?
    · Share on TwitterShare on Facebook
  • Florian W.
    Florian W. Member Posts: 1,324
    edited Jul 28, 2009 10:09AM
    Hi to all those have trouble with Oracle XE and APEX!

    After successfully installing Oracle XE the listener should show an output like this: 
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 28-JUL-2009 15:51:57

Copyright (c) 1991, 2005, Oracle.  All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                27-JUL-2009 17:06:02
Uptime                    0 days 22 hr. 45 min. 54 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FE-VS-26-16-MAT.IT-TRAINING.FUS)(PORT=1521)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FE-VS-26-16-MAT.IT-TRAINING.FUS)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
  Instance "XE", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
  Instance "XE", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
  Instance "XE", status READY, has 1 handler(s) for this service...
The command completed successfully
    It does not matter that I've shown the output of an Oracle XE running on Linux. The listener should show the same output on Windows too. The important lines in this output are the following ones: 
    Service "XE" has 1 instance(s).
  Instance "XE", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
  Instance "XE", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
  Instance "XE", status READY, has 1 handler(s) for this service...
    The XEXDB service is the one that is responsible for connections with APEX. If this service is not running then no one can connect to APEX.

    One approach to get things running is to comment out the following line in the %ORACLE_HOME%\network\admin\sqlnet.ora file: 
    #SQLNET.AUTHENTICATION_SERVICES= (NTS)
    After commenting out this line please restart the listener and register your oracle instance with the listener. 
    lsnrctl stop
lsnrctl start

sqlplus / as sysdba

ALTER SYSTEM REGISTER;

exit

lsnrctl status
    Now the listener should show the XEXDB service and you can try to connect to APEX with your browser.

    If this does not work then again change your sqlnet.ora file like this: 
    #SQLNET.AUTHENTICATION_SERVICES= (NTS)
SQLNET.AUTHENTICATION_SERVICES= (NONE)
    Yours sincerely

    Florian W.

    Edited by: Florian W. on 28.07.2009 16:08
    · Share on TwitterShare on Facebook
  • 714341
    714341 Member Posts: 5
    thanks for your fast reply! unfortunately it did not work. I got:

    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 28-JUL-2009 17:30:27

    Copyright (c) 1991, 2005, Oracle. All rights reserved.

    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    ------------------------
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    Start Date 28-JUL-2009 17:29:57
    Uptime 0 days 0 hr. 0 min. 33 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
    Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=einatsi.rosettagenomics.com)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    · Share on TwitterShare on Facebook
  • Florian W.
    Florian W. Member Posts: 1,324
    Hi again!

    OK, Another approach is tell your instance the name of the listener where it should dynamically register.

    1.) Edit your %ORACLE_HOME%\network\admin\tnsname.ora 
    # tnsnames.ora Network Configuration File:

XE =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = einatsi.rosettagenomics.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
    )
  )

XE_LISTENER =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = einatsi.rosettagenomics.com)(PORT = 1521))
    )

EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    )
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
    )
  )
    2.) Start SQL*Plus as sysdba and register your instance with your listener. 
    sqlplus sys/password as sysdba

ALTER SYSTEM SET local_listener=XE_LISTENER;

ALTER SYSTEM REGISTER;

exit
    3.) Check the listener status if it is correct.

    I hope that this one will help you along.

    Best Regards

    Florian W.
    · Share on TwitterShare on Facebook
  • 714341
    714341 Member Posts: 5
    Hi,
    After replacing the script in tnsnames.ora with that you provided in 1)

    and running:
    sqlplus sys/password as sysdba

    I got:

    C:\Documents and Settings\einat_si>sqlplus sys/password as sysdba
    Error 46 initializing SQL*Plus
    HTTP proxy setting has incorrect value
    SP2-1502: The HTTP proxy server specified by http_proxy is not accessible

    Since we do not have a proxy here, I'm puzzled...

    thanks,
    Einat
    · Share on TwitterShare on Facebook
This discussion has been closed.