1 Reply Latest reply: Jan 7, 2010 4:23 AM by 807557 RSS

    x6270 - problem accessing ILO webGUI

    807557
      Hi,
      I have just inserted a new x6270 blade in my sun6000 chassi. We have only used X6250 blades in this chassi so far.

      I have configured the IP-address of the ILO-port on the blade. I can access that IP-address using SSH.

      But I can not access the ILO webpage!

      As seen below bott HTTP and HTTPS services are enabled.

      -> show http

      /SP/services/http
      Targets:

      Properties:
      port = 80
      secureredirect = enabled
      servicestate = enabled

      -> show https
      /SP/services/https
      Targets:
      ssl

      Properties:
      port = 443
      servicestate = enabled

      The ILO versions on my system are:
      CMM = 3.0.6.11
      X6250 = 3.0.6.13
      X6270 = 3.0.6.10

      I believe these are all the latest ILO SW available.
        • 1. Re: x6270 - problem accessing ILO webGUI
          807557
          To get around problem of x6270 Blades BUI not working when
          ssh functions correctly the firmware needs to be reflashed.

          Refer to the document
          Sun™ Integrated Lights Out
          Manager (ILOM) 3.0
          CLI Procedures Guide

          This will provide instructions to download firmware and cli procedure
          to reflash firmware. - follow procedure to upgrade firmware to
          relash same revision.